ReviewsRigid Aluminum Conduits

Torpedo Level, Magnetic Conduit Level with 4 Vials, V-Groove and Magnet Track, Aluminum Alloy Construction, High Viz Orange (6 inch)

  • Easy-to-read high-visibility bubbles at 4 angles: level, 90, 45, and 30 degrees..
  • Thumb screw attaches level to conduit to measure angle while bending..
  • Magnetic digital level made in Heavvy duty aluminum alloy frame ensures accuracy and durability..
  • Featuring a strong holding magnetic side, perfect for steel construction work and conveniently attaches to iron pipes, conduits or any other iron surface..
  • Torpedo Level has portable size, it's convenient storage and transport. easily put into your tool belt or pocket..
Check Stock

Torpedo Level, Magnetic Conduit Level with 4 Vials, V-Groove and Magnet Track, Aluminum Alloy Construction, High Viz Black (6 inch)

  • Easy-to-read high-visibility bubbles at 4 angles: level, 90, 45, and 30 degrees.
  • Thumb screw attaches level to conduit to measure angle while bending.
  • magnetic digital level made in Heavvy duty aluminum alloy frame ensures accuracy and durability.
  • Featuring a strong holding magnetic side, perfect for steel construction work and conveniently attaches to iron pipes, conduits or any other iron surface.
  • Torpedo Level has portable size, it's convenient storage and transport. easily put into your tool belt or pocke.
Check Stock

Lambro 60633 Semi-Rigid Aluminum Dryer Ducting, 4 inch x 8 Ft, Silver

  • Semi-rigid duct will not collapse, sag or kink.
Check Stock

Sealproof 1-Inch Non-metallic Liquid-Tight Conduit and Connector Kit, 25 Foot Made in USA Flexible Electrical Conduit Type B with 4 Straight and 2 90-Degree Conduit Connector Fittings, 1" Dia

  • Made in USA. Use with Sealproof straight or right angle connectors.
  • can be used with any Type B mettalic or nonmettalic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
  • Sealproof Made in USA flexible PVC conduit resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • outdoor, sunlight resistant, direct burial..
  • Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
  • Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
  • UL Listed Underwriter's Laboratories File No. E-129973.
  • UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check Stock

SOLA XPRO Tub & Shower Box Beam Level Set, 32 & 59-Inch, LSX5932

  • Break-resistant acrylic block FOCUS vials with 60% magnification and luminous backing.
  • Ergonomic, rigid aluminum profile for maximum stability (890 g/m strength).
  • Shock absorbing end caps with anti-slip surface.
  • Ergonomic, rigid aluminum profile for precise measurement results.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Red Walnut (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Matte White (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

SOLA LSX59 X PRO Aluminum Box Profile Spirit Level with 3 60% Magnified Vials, 59-Inch

  • Break-resistant acrylic block FOCUS vials with 60% magnification and luminous backing.
  • Ergonomic, rigid aluminum profile for maximum stability (890 g/m strength).
  • Shock absorbing end caps with anti-slip surface.
  • Ergonomic, rigid aluminum profile for precise measurement results.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Gloss Black (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
  • Frequency Response: 35–25,000 Hz ±3dB, Recommended Amplifier Power: 20-400 watts per channel.
  • Horizontal Dispersion: 80°, Vertical Dispersion: 30°, Sensitivity: 94 dB/2.83 volts/meter.
  • Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers..
  • Weight: 66 lbs., Dimensions: 48" x 11.4" x 14.4".
Check Stock

Axe Cutting Wood with Impact Version 4

  • Excellent Motor: This machine is equipped with three 57 stepper motors and a 300W standard spindle motor to ensure a smooth operation. The 400 x 300 x 100 mm working area also contributes to an excellent cutting and milling performance..
  • Rigid Coupling & Ball Screw: Refined rigid coupling is capable to eliminate transmission error. X & Y axis ball screw and nuts can reduce friction and improve accuracy. Help you achieve higher performance and better control..
  • Redesigned Control Box: This cutting machine has an independent offline controller. You can adjust the XYZ axes and turn on or off the spindle manually. You can also connect it to a computer via the USB interface, implementing more steps..
  • Aluminum Alloy Board: The aluminum alloy operating panel allows users to wipe the engraving drills with oil or a small amount of water to achieve a cooling effect. Besides, it also features hard-wearing and never rust, prolonging life service..
  • Wide Application: This CNC router machine comes with 20 pcs drill bits. It can be used on many projects and materials, such as plastics, woods, soft aluminum, acrylics, PVC, PCB, etc..
Check Stock

Builder's Best 010149 Adjustable Dryer Vent Periscope, 0" to 5", 6" Length, 2" ID, Aluminum

  • 0 to 5-inch telescoping rigid dryer vent for overlapping or very close outlets.
  • Only requires 2 1/2 inches of clearance between the wall and the dryer.
  • 2″ x 6″ rigid aluminum with smooth interior decreases air friction.
  • Made in the USA out of 100 percent aluminum.
  • Overall length of periscope is 12″, 0-5″ measurement is from center to center of the collars..
Check Stock