ReviewsRigid Coupling

uxcell 6mm to 1/4 Inch Bore Rigid Coupling Set Screw L25XD18 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,2pcs

Connection Bore Diameter: 6mm to 1/4 inch.
Total Length: 25mm/0.98 inch, Outside Diameter : 18mm/0.7 inch.
Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
high torque with rigidity, low inertia and excellent sensitivity..
NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..

Check Stock

uxcell 5mm to 5mm Bore Rigid Coupling Set Screw L20xD12 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Red,2pcs

Connection Diameter: 5mm to 5mm, Total Length: 20mm /0.78 inch, Outside Diameter : 12mm/ 0.47 inch.
Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
high torque with rigidity, low inertia and excellent sensitivity..
NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..

Check Stock

uxcell 1/4 inch to 8mm Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Blue,2pcs

Connection Diameter: 1/4 inch to 8mm, Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch.
Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
high torque with rigidity, low inertia and excellent sensitivity..
NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..

Check Stock

uxcell 1/4 inch to 10mm Bore Rigid Coupling Set Screw L25XD16 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Blue,2pcs

Connection Diameter: 1/4 inch to 10mm, Total Length: 25mm /0.98 inch, Outside Diameter : 16mm/ 0.63 inch.
Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
high torque with rigidity, low inertia and excellent sensitivity..
NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..

Check Stock

uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Blue w Wrench

Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
high torque with rigidity, low inertia and excellent sensitivity..
NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..

Check Stock

uxcell 1/4 Inch to 1/4 Inch Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Dark Blue,2pcs

Connection Bore Diameter: 1/4 inch to 1/4 inch.
Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch.
Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
high torque with rigidity, low inertia and excellent sensitivity..
NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..

Check Stock

uxcell 1/4 Inch to 1/4 Inch Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Dark Blue,4pcs

Connection Bore Diameter: 1/4 inch to 1/4 inch.
Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch.
Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
high torque with rigidity, low inertia and excellent sensitivity..
NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..

Check Stock

Axe Cutting Wood with Impact Version 4

Excellent Motor: This machine is equipped with three 57 stepper motors and a 300W standard spindle motor to ensure a smooth operation. The 400 x 300 x 100 mm working area also contributes to an excellent cutting and milling performance..
Rigid Coupling & Ball Screw: Refined rigid coupling is capable to eliminate transmission error. X & Y axis ball screw and nuts can reduce friction and improve accuracy. Help you achieve higher performance and better control..
Redesigned Control Box: This cutting machine has an independent offline controller. You can adjust the XYZ axes and turn on or off the spindle manually. You can also connect it to a computer via the USB interface, implementing more steps..
Aluminum Alloy Board: The aluminum alloy operating panel allows users to wipe the engraving drills with oil or a small amount of water to achieve a cooling effect. Besides, it also features hard-wearing and never rust, prolonging life service..
Wide Application: This CNC router machine comes with 20 pcs drill bits. It can be used on many projects and materials, such as plastics, woods, soft aluminum, acrylics, PVC, PCB, etc..

Check Stock

1 Piece Clamp 1/2\ x 5/8\ Bore Dia. Steel Rigid Shaft Coupling

Item - Rigid Shaft Couplings: Rigid Shaft Coupling, Clearance Dia. (In.): 1-9/16, Max. Torque (In.-Lbs.): 710.

Check Stock

Universal Joint, 16mm to 32mm Rotatable Universal Joint Shaft Coupling Metal Motor Connector Coupler with Screws for RC Boat Car

【HIGH QUALITY PRODUCT】1 Pc universal joint coupling with 2 Pcs screws, brand new and high quality, practical and reliable, easy to install and remove..
【PERFECT MOTOR SHAFT FITTING】360 degree rotatable, it is commonly used for shafts that transmit rotary motion, perfect motor shaft fitting accessories..
【OUTSTANDING COUPLING CONNECTOR】This joint or coupling connects rigid rods whose axes are inclined to each other, outstanding appearance and performance..
【METAL MATERIAL】Made of premium metal material, it is durable and has long service life..
【WIDE APPLICATION】Widely applied for connecting model cars, model ships, robots, etc..

Check Stock

U-Joint Shaft 15mm ID Universal Joint Coupling Rotatable Double Section Coupling Joint 15 * 32 * 85mm DIY Steering Joint

FIRMLY CROSS SHAFT: The double section Cross shaft coupling is applied to rigid rods whose connecting axes are inclined to each other, usually when the rigid rod with complicated path is not easy to work.
THICK UNIVERSAL JOINT: This motor connector consists of a pair of hinges that are close together, these hinges are connected by a horizontal axis, and the other end will also move with the free rotation.
SPECIFICATIONS: Material: Metal--Inner Diameter: 15mm / 0.6in--Outer Diameter: 32mm / 1.3in--Length: 85mm / 3.3in--Weight: 344g / 12.1oz (approx.).
HIGH HARDNESS COUPLING: Our universal joints are made of high-quality metal, which has high hardness, will not be deformed when transmitting torque, is durable and has a long service life.
COMPLETE ACCESSORIES:1 x Universal Joint2 x Screws,Widely used for connecting model cars, model ships, robots, etc.

Check Stock