ReviewsRigid Pcb Board

uxcell 17pcs DIP IC Chip Socket Adaptor Round 28 Pin 2.54mm Pitch Dual Row 15.24mm Row Pitch

Row to Row Distance(Approx):15.24mm/ 0.6".
As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.

Check Stock

uxcell 20pcs DIP IC Chip Socket Adaptor Solder Type 2.54mm Pitch Dual Row 8 Flat Pin 7.6mm Row Pitch

As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.

Check Stock

PCB Drill Bits Set, Micro Drill Bits Set, 50pcs PCB Drill Bit Set Spiral Flute Carbide 0.3mm-1.2mm Drill Bits for Dremel Print Circuit Board Jewelry CNC Engraving (5PCS Each) by BOOTOP

This PCB Drill Bit Set contains 10 different size drill bits diameter: 0.3mm, 0.4mm, 0.5mm, 0.6 mm, 0.7 mm, 0.8 mm, 0.9 mm, 1.0 mm, 1.1mm, 1.2mm. And each size have 5 pcs. Varies sizes to meet different needs..
This micro drill bits are designed to drill and engrave on print circuit board and other precise work. The PCB Drill Bits are made of high quality tungsten steel, highly wear resistance, high hardness, bending strength, anti-impairment, highly working efficiency. Seismic design on the blade edge enables it to stay stable during engraving..
PCB Drill Bits Set are great for punching at printed circuit boards, 3D Printer Nozzle Cleaning, CNC engraving plexiglass, Amber beeswax, bakelite, jewelery, metal plastic and other precision drilling.
cutting and engraving and worked on Acrylic, PVC, Nylon, Resin, Fiberglass,etc..
PCB Drill Bit With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left. Package with high quality plastic box, easy carry and better protection keeps the blade tip goods in the delivery from being damaged..
180 Days warranty. If you are not satisfied with our products,feel free to contact us for a replacement or refund. The PCB Drill Bits may also know as micro d....

Check Stock

ODOMY 57pcs Pin Vise Hand Drill Bits Mini Hand Drill Rotary Tool,46pcs 0.3-3.0mm Micro Twist Drill Bits and 10pcs PCB Mini Drill Bits for Resin Plastic Wood Jewelry Making

Practical and Portable: The hand-held drill is easy to carry or store in a toolbox or pocket, making your daily work more convenient, suitable for electronic assembly, tools, model making, winding, home decoration, etc..
Pin Vise Hand Drill: Aluminum alloy, sturdy and durable, its tail can be rotated, sturdy and easy to operate, Ideal for making pilot holes when fixing small item that you can’t hold eg plastic sleepers on the track..
You Will Receive:A total of 57 pieces of electric hand drill set for you to do hand-carving DIY work, Twist drill bit: 0.3-3mm, PCB micro drill: 0.1mm-1mm, Vise: 3.5*0.6inch..
PCB micro drill: PCB micro drill is made of tungsten carbide, suitable for processing PCB, ordinary FR-4, CEM-3 board, SMT, CNC, mold, plastic, circuit board, carbon fiber, composite board, etc..
Micro twist drill: The micro drill is light in weight and compact in size. It does not take up extra space. It is used to process wood, plastic, rubber, PVC, walnut, model, bone, angle steel, amber, olive, fiberglass, and other materials..

Check Stock

Delfield 3516459 3.00 X 7.00 Receiver

Directly printing inductor traces on the PCB board greatly simplifies the difficulty of assembly..
12V power supply, 9.2 x 7.5cm PCB board size, which can be directly used in 97 x 40 x 75mm aluminum chassis.
It is specially used to receive the call between the aircraft and the tower. With the antenna with good performance (VHF band Yagi antenna), the open area can receive various types of aircraft and tower calls within about 190Km. Please pay attention to your favorite friends..
The AGC circuit on the board ensures comfortable listening, while the squelch function avoids long-term noise..
The kit uses a band-pass filter, 3355 high-amplifier, NE602 mixing, MC1350 mid-amplifier solution, which can receive AM signals of 118-136MHz..

Check Stock

Switch Sound Dampeners Sheet Soft Landing Pads Dimple Foam Sponge (87 Layout)

【Product Function】Eliminating cavity sound, increasing sound thickness and reducing keyboard resonance..
【Eliminate Keyboard Noise】Between the installation and the PCB and the steel plate, the steel plate and the PCB are used for clamping, no adhesive is required, and the light position is not affected. It fills the entire keyboard, the soud is thicker , the resonance of the plastic keyboard and the cavity sound are eliminated..
【Switch Sound Dampeners Sheet】This product is a Switch Sound Dampeners sheet, which is placed between the keyboard's circuit board (PCB) and the positioning board. It is a must for keyboard lovers to DIY your keyboard..
【3mm Thickness】Most of the silencer pads are designed based on a standard 1.5mm positioning plate. Due to the processing accuracy of the plate, the space between the PCB and the positioning plate ranges from 3mm to 3.5mm. Regardless of whether the keyboard switch is welded or hot-plugged, the 3mm silencer pad is the best choice..
【Warm Tips】This silencer pad is measured and drawn according to the keyboard entity. It is not produced by the original manufacturer and cannot be guaranteed to be fully fitted. Some of the holes, gaps, and circles may be caused by too many models and brands of the sam....

Check Stock

18V 5.0Ah 4.0Ah 3.0Ah Replacement Battery Plastic Case for Milwaukee 18V M18 M18B 48-11-1820 48-11-185048-11-1828 48-11-10 Li-ion Battery Cover Part

Li-ion Battery Plastic Case M18 Shell Charging Protection Circuit Board For Milwaukee 18V M18 48-11-1815 3Ah 4Ah 5Ah PCB Board.
only have Circuit Board(PCB) Plastic Case ,Screw, Spring (NO BATTERY).
Completely protection and replacement for original Battery.
Designed 100% compatible and easy to repair the broken circuit board.
Quick-responding technical support for free.

Check Stock

PAUTIX COB LED Strip Lights 20ft/6.1m 6000K Daylight White,504 LEDs/m 6000LM Super Bright DC24V CRI90+ Flexible LED Tape for Cabinet Home DIY Lighting Projects(Power Supply Not Included)

【Ultra Bright & Longer Length】3087 LED chips on this 20ft COB LED Strip Lights(504LEDs/m),which make the emitting units unprecedentedly close to each other, and create super even lighting performance,20ft/6.1m longer length allows you to decorate large spaces.Compared to the SMD 2835: 1 chip on board, or 5050: 3 chips on board,a COB(Chip On Board) LED light has multiple chips on the same PCB (Printed Circuit Board).
【The Highlights of COB】Lower power, higher light efficienc,higher color rendering index(90+). 180 degrees beam angle design for 50% wider lighting,multiple chips on board for uniform illumination,NO MORE worries about dark spot!(Power interface specification: 5.5mm 2.1mm).
【Safe for Daily Use】Compared to regular LED strip lights,the light is soft and uniform,which is safer to your eyes.With real double-layer PCB board,the PAUTIX COB LED Strip Light has better heat dissipation than others,it's safe for children and pets to touch.
【Widely Use & Durable】COB LED light strip with high color rendering index(90+), rich colors and strong reduction applicable to high-end business clubs, jewelry, cabinet lighting,it also provides super bright light for your dressup mirror /make-up table /closet /bookshelf /wine shelf /TV backlight.High....

Check Stock

GeeekPi Electronic Fun Kit,with 3PCS Half Sized Breadboard Cable Resistor LED Potentiometer for Electronic Learning Kit, Compatible with Arduino IDE, UNO R3, MEGA2560, Raspberry Pi Range(Black)

This is an entry-level kit that contains DIY solderable PCB breadboards, male and female Pin headers, LED lights, resistor packages, and jumper packages..
More than 200 pieces of components, compatible with Arduino IDE, Raspberry Pi and other microcontroller boards..
3PCS Proto Breadboard PCB Board Gold Plated Experimental Breadboard Soldering Board Double-Sided PCB.

Check Stock

powerday S550 Hexacopter Frame Kit PCB w/Carbon Fiber Landing Gear Plastic arm

F550 is a multi-rotor designed for all pilots for fun or AP..
Using high strength compound PCB frame board, which makes wiring of ESCs and battery more easily..
Made by advanced engineering material, super strong & smooth Kit.
It can be applied for entertainment, aerial photography, FPV and other activities..
New design PCB board special for F550,support standard flight controller like MK, KK, FF, MWC, APM.

Check Stock

Delay-1 DIY Guitar Pedal Kit With 1590B Aluminum Metal Stomp Box Case Enclosure

1.This Kit is super easy to build and very rewarding.
2.The PCB is designed to fit perfectly inside the pre- drilled 1590B enclosure(included).
3.Our PCB is a double-side welding high-quality and professionally designed and produced PCB board.

Check Stock