ReviewsRigid Pcb Boards

Hotop 6 Pieces Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 1.5 meter Length (Multi-color,1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm)

What you get: come with 6 pieces of no-clean solder wicks in different size, including 0.04 inch, 0.05 inch, 0.07 inch, 0.1 inch, 0.12 inch, 0.14 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs.
No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards.
Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency.
Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work.
Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.

Check Stock

250pcs Standoffs Nylon M2 M3 Male Female Hex Column Standoff Screws Nuts Assortment Kit for Communication Electroplating M3 Male Standoff A

250pcs standoffs are made of durable environmentally friendly nylon PA66, which has stable and long-lasting acid resistance, alkali resistance, insulation and signal interference resistance..
The waterproof nylon spacer support is rust-proof and easy to clean. You only need to clean it with a cloth..
There are 4 different kits to meet your building needs, including various male or female brackets, nuts and screws..
Threaded standoff is very suitable for installation between the PCB circuit board and the machine board. It is very suitable for creating hot channels between chips, or creating multi-layer and multi-layer "nerd" homemade circuit board arrays..
They are not easy to slip when used correctly. It is very suitable for installing boards between PCB circuit boards and machines, and is widely used in communications, electroplating, medical equipment, office equipment, electronic products and other industries..

Check Stock

PCB Drill Bits Set, Micro Drill Bits Set, 50pcs PCB Drill Bit Set Spiral Flute Carbide 0.3mm-1.2mm Drill Bits for Dremel Print Circuit Board Jewelry CNC Engraving (5PCS Each) by BOOTOP

...her precise work. The PCB Drill Bits are made of high quality tungsten steel, highly wear resistance, high hardness, bending strength, anti-impairment, highly working efficiency. Seismic design on the blade edge enables it to stay stable during engraving..
PCB Drill Bits Set are great for punching at printed circuit boards, 3D Printer Nozzle Cleaning, CNC engraving plexiglass, Amber beeswax, bakelite, jewelery, metal plastic and other precision drilling.
cutting and engraving and worked on Acrylic, PVC, Nylon, Resin, Fiberglass,etc..
PCB Drill Bit With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left. Package with high quality plastic box, easy carry and better protection keeps the blade tip goods in the delivery from being damaged..
180 Days warranty. If you are not satisfied with our products,feel free to contact us for a replacement or refund. The PCB Drill Bits may also know as micro drill bits,NCN drill bits,micro drill bits set,plexiglass drill bit set,circuit board drill bits,pcb drill set,drill bits for dremel tool,small diameter drill bits, PCB drill bit set..

Check Stock

GeeekPi Electronic Fun Kit,with 3PCS Half Sized Breadboard Cable Resistor LED Potentiometer for Electronic Learning Kit, Compatible with Arduino IDE, UNO R3, MEGA2560, Raspberry Pi Range(Black)

This is an entry-level kit that contains DIY solderable PCB breadboards, male and female Pin headers, LED lights, resistor packages, and jumper packages..
More than 200 pieces of components, compatible with Arduino IDE, Raspberry Pi and other microcontroller boards..
3PCS Proto Breadboard PCB Board Gold Plated Experimental Breadboard Soldering Board Double-Sided PCB.

Check Stock

Yahboom LED Strip Light Programmable WS2812 DC 5V PH2.0 RGB Full Color-Driven Compatible with Raspberry Pi Pico Arduino Microbit STM32 ESP32 5 Bit 4PCS 14 Bit 2PCS

【Full color, high brightness】 The brightness of the lamp beads of the light bar module can be controlled individually, the brightness range can be adjusted from 0-255, and different colors can be customized according to needs.
【Programmable, widely used】 Compatible with most development boards, such as: raspberry pi, arduino, Microbit, STM32, ESP32, etc. Widely used in programmable DIY robot projects, electronic experiments, LED decorative lights, full-color modules, full-color flexible light strips, indoor and outdoor LED video irregular screens..
【Cascade of 5 LEDs】The 5 LED strips provide 7.5cm cable and 20cm cable, which can be connected end to end to form a longer strip. The decoration around the DIY trolley is colorful.
【Material Soft and Hard Available】The light bar with 14 lamp beads is a flexible FPCB, which can be freely bent into the shape you want to match the installation location. The light bar of the 5 lamp beads is a rigid PCB, which can maintain a straight shape.

Check Stock

PCB Drill Bits Set, Micro Drill Bits Set, 10 Pcs Print Circuit Board Drill Bits, 0.1mm to 1.4mm Drill Bits Carbide Drill Bits Tool Set(0.1mm)

Cutting Edge Diameter: 0.1mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.7mm, 1.2mm, 1.3mm, 1.4mm(Optional).
Drills bits are perfect for delicate drilling through hard materials for model engineering, jewelry repairs, craft work, suitable for PCB, SMT, CNC, mold, sculpture, plastic, copper, stainless steel..
Drill bit has a large scraps discharge space,reduce cutting force and broken drill,little resistance and smoothly during the scraps discharge,improve the quality of hole wall..
PCB drill bits are easy to change out and do a great job cutting through the PCB for solder holes.Come in a great storage container that is easy to grab the drill bit you need when you need it..
These bits are made of high quality materials,work fantastic on PCB boards. Sharp and twisted flute will make the drilling be more easy..

Check Stock

BOJACK 6 Vaules 40 Pcs Double Sided PCB Board Prototype Kit for DIY Soldering with 6 Sizes Compatible with Arduino Kit

BOJACK high quality 6 Vaules 40 Pcs Double Sided PCB Board Prototype Kit.
The product contains six different sizes of circuit boards of circuit boards2*8CM,3*7CM,4*6CM,5*7CM,6*8CM,7*9CM.different size boards to meet your....
4 mounting holes at the corners of the board are very convenient for installing them together..
Using high-quality and durable glass fiber FR-4, high-quality and firm..
Widely used in electronic experiments and point-to-point DIY IoT projects..

Check Stock

EPLZON Gold Plated PCB Solder-able Breadboard for DIY Electronics Projects Compatible with DIY Arduino Soldering Projects 2.05"x3.5" (5 Pack + 2 Mini Board, Black)

✅This board is especially useful for preserving a prototype or experiment you just created on a solder-less breadboard by soldering all the pieces in place..
✅Suitable for a variety of MCU boards, compatible with Arduino Nano, ESP8266, NodeMCU, etc.
suitable for various DIP type components.
suitable for any type of Raspberry Pi GPIO breadboard PCB..
✅Gold plated finish to prevent oxidation, high quality gold finish for easy soldering,and all holes are through-plated for mounting strength.
✅5pcs 2.05"x3.5" PCB Solder-able Breadboard + 2pcs 2.0"x1.5" mini PCB Solder-able Breadboard for prototyping and transferring,Black.
✅Lead-free and RoHS compliant for longer shelf life.

Check Stock

MA Ford 302MD #89 Solid Carbide Circuit Board Drill

?【Quality Material】The PCB Drill Bits are made of high quality tungsten carbide , highly wear resistance, high hardness, bending strength, anti-impairment, highly working efficiency..
?【10 Pieces PCB Drill Bits Set】Cutting edge diameter: 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm..
?【High Precision】With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left..
?【Package Include】Package with high quality plastic box, easy carry and better protection keeps the blade tip goods in the delivery from being damaged..
?【Wide Application】Great for 3D Printer Nozzle Cleaning, Amber beeswax, circuit boards, bakelite, CNC engraving plexiglass, jewelery, metal plastic and other precision drilling..

Check Stock

Purse Organzier Bag Organizer with Metal Zipper Large Beige

★32 pieces double sided PCB prototype boards well packed in a plastic tray which is very easy to store and take out.
★5 different size boards to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects.
★4 mounting holes at the corners of the board are very convenient for installing them together..
★Pre-tinned plated holes on the board make it very handy to solder components and sensors for your projects.
★High quality of durable glass fiber –FR4 material with 1.6mm thickness makes a very solid and sturdy prototype circuit board.

Check Stock

60 Pieces Pin Vises Hand Drill Bits Micro Mini Twist Drill Bits Set with Precision Hand Pin Vise Rotary Tools for Wood,Jewelry, Plastic etc

【Package Contant】1 piece pin vise hand drill, 48 pieces of micro twist drill bits (0.5-3.0mm), 10 pieces of PCB mini drill bits (0.3-1.2mm), and 1 piece bench vise..
【Pin Vise】Made of quality aluminum alloy, durable and firm, adopt 3 claws chuck and 0.3 - 3.4 mm range of adjustable clamp which is sturdy and convenient for you to operate, its tail can be rotated, easy for you to use.
【48 Pieces Twist Drill Bits 】Include 3 Pieces of 0.5，0.6，0.7，0.8，0.9，1.0mm size, total 18 piece.
2 pieces of 1.1，1.2，1.3，1.4，1.5，1.6，1.7，1.8，1.9，2.0mm size, a total of 20 pieces.
1 piece of 2.1，2.2，2.3，2.4，2.5，2.6，2.7，2.8，2.9，3.0mm size, a total of 10 pieces.
【10 Pieces PCB Drill Bit】PCB mini drills are made of tungsten carbide, the shank diameter is approx. 3.175 mm, overall length is approx. 38 mm, which fit for processing PCB, normal FR-4, CEM-3 boards, SMT, CNC, molds, plastic, circuit board, carbon fiber, composite board and so on.
【Fit dimension】 the pin vise is approx. 3.54 x 0.6 inches/ 9 x 1.4 cm, bench vise is approx. 4.3 x 2.4 x 1.4 inches/ 11 x 6.1 x 3.5 cm, can be appropriate for you to put in your bag or pocket.

Check Stock