ReviewsRing Joint Gasket Spiral

Towel Ring Brushed Nickel Angle Simple SUS304 Stainless Steel Hand Towel Rack Unique Oval Shaped Towel Holder Modern Bathroom Towel Hanger

  • FUNCTION & AESTHETICS COMBINED: clean modernist style with delicately sleek lines makes an exquisite statement, handy for holding hand towel, face cloth, dish rag, tie, scarf or other daily stuff.
  • ROTATABLE WITH INVISIBLE GASKET: gasket hides inside the joint for smooth and soundless operation, easily swings the ring back and forth when you grab or use towels without wobbling or hitting wall, reduces friction for extra durability.
  • LONG LASTING WORKMANSHIP: high-grade SUS304 stainless steel for reliability and rust resistance, strict polished process to a smooth touch, premium & warm metallic brushed nickel finish maintains its brilliance.
  • A MUST FOR MOST SPACE: distance between the wall and ring is 2-3/16"(55mm) for air drying out damp towel, doesn't extend out too far, it's an utilitarian and modern updated addition for any remodeling project.
  • THOUGHTFUL & PRACTICAL FEATURE: special oval shaped towel ring helps spread towels without completely bunching up compared to the round ring, holds towels in a uncluttered way, no falling off.
Check Stock

Sterling Seal 90008316GR150X6 316L Stainless Steel spiral Wound Gasket with Flexible Graphite Filler, for 8\ Pipe, Pressure Class 150# (QTY: 6) , green Band with Grey Stripes (Pack of 6)

  • SSS style 913, 316L stainless steel spiral wound gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 913 gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

Sterling Seal SSI90002304GR150x12 Spiral Wound Gasket with Flexible Graphite Filler for 2\ Pipe, Pressure Class 150#, 2.75\ ID, 304 SS Windings/Graphite/Carbon Steel Outer Ring (Pack of 12)

  • Sterling Seal & Supply Style 9000 - 304 Stainless Steel Spiral Wound Gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 9000 gaskets supplied by Sterling Seal & Supply are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket Identification Markings Required by ASME B16.20 clearly Etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation Tip: Spiral Wound Gaskets with internal or external guide rings should be fully compressed to the guide ring. This will not damage the gasket or affect the sealing performance.
  • Installation Tip: Check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of bolt lubrication is employed.
Check Stock

Sterling Seal SSI90002304GR600x12 Spiral Wound Gasket with Flexible Graphite Filler for 2\ Pipe, Pressure Class 600#, 2.75\ ID, 304 SS Windings/Graphite/Carbon Steel Outer Ring (Pack of 12)

  • Sterling Seal & Supply Style 9000 - 304 Stainless Steel Spiral Wound Gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 9000 gaskets supplied by Sterling Seal & Supply are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket Identification Markings Required by ASME B16.20 clearly Etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation Tip: Spiral Wound Gaskets with internal or external guide rings should be fully compressed to the guide ring. This will not damage the gasket or affect the sealing performance.
  • Installation Tip: Check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of bolt lubrication is employed.
Check Stock

Sterling Seal SSI90001500304GR1500x24 Spiral Wound Gasket with Flexible Filler for 1-1/2\ Pipe, Pressure Class 1500#, 1.875\ ID, 304 SS Windings/Graphite/Carbon Steel Outer Ring (Pack of 24)

  • Sterling Seal & Supply Style 9000 - 304 Stainless Steel Spiral Wound Gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 9000 gaskets supplied by Sterling Seal & Supply are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket Identification Markings Required by ASME B16.20 clearly Etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation Tip: Spiral Wound Gaskets with internal or external guide rings should be fully compressed to the guide ring. This will not damage the gasket or affect the sealing performance.
  • Installation Tip: Check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of bolt lubrication is employed.
Check Stock

Sterling Seal SSI90004304GR150x12 Spiral Wound Gasket with Flexible Filler for 4\ Pipe, Pressure Class 150#, 5\ ID, 6.875\ OD, 304 SS Windings/Graphite/Carbon Steel Outer Ring (Pack of 12)

  • Sterling Seal & Supply Style 9000 - 304 Stainless Steel Spiral Wound Gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints..
  • Style 9000 gaskets supplied by Sterling Seal & Supply are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket Identification Markings Required by ASME B16.20 clearly Etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow..
  • Installation Tip: Spiral Wound Gaskets with internal or external guide rings should be fully compressed to the guide ring. This will not damage the gasket or affect the sealing performance..
  • Installation Tip: Check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of bolt lubrication is employed..
Check Stock

Sterling Seal SSI90003304GR150x12 Spiral Wound Gasket with Flexible Filler for 3\ Pipe, Pressure Class 150#, 4\ ID, 5.375\ OD, 304 SS Windings/Graphite/Carbon Steel Outer Ring (Pack of 12)

  • Sterling Seal & Supply Style 9000 - 304 Stainless Steel Spiral Wound Gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints..
  • Style 9000 gaskets supplied by Sterling Seal & Supply are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket Identification Markings Required by ASME B16.20 clearly Etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow..
  • Installation Tip: Spiral Wound Gaskets with internal or external guide rings should be fully compressed to the guide ring. This will not damage the gasket or affect the sealing performance..
  • Installation Tip: Check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of bolt lubrication is employed..
Check Stock

Sterling Seal 90002500316GR150X6 316L Stainless Steel spiral Wound Gasket with Flexible Graphite Filler, for 2-1/2\ Pipe, Pressure Class 150# (QTY: 6) , 2.5 , green Band with Grey Stripes (Pack of 6)

  • SSS style 913, 316L stainless steel spiral wound gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 913 gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

Sterling Seal SSI9000.500304GR300x12 Spiral Wound Gasket with Flexible Filler for 1/2\ Pipe, Pressure Class 300#, 0.75\ ID, 304 Stainless Steel Windings/Graphite/Carbon Steel Outer Ring (Pack of 12)

  • Sterling Seal & Supply Style 9000 - 304 Stainless Steel Spiral Wound Gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 9000 gaskets supplied by Sterling Seal & Supply are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket Identification Markings Required by ASME B16.20 clearly Etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation Tip: Spiral Wound Gaskets with internal or external guide rings should be fully compressed to the guide ring. This will not damage the gasket or affect the sealing performance.
  • Installation Tip: Check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of bolt lubrication is employed.
Check Stock

Sterling Seal SSI90006304GR150x12 Spiral Wound Gasket with Flexible Filler for 6\ Pipe, Pressure Class 150#, 7.187\ ID, 8.75\ OD, 304 SS Windings/Graphite/Carbon Steel Outer Ring (Pack of 12)

  • Sterling Seal & Supply Style 9000 - 304 Stainless Steel Spiral Wound Gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints..
  • Style 9000 gaskets supplied by Sterling Seal & Supply are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket Identification Markings Required by ASME B16.20 clearly Etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow..
  • Installation Tip: Spiral Wound Gaskets with internal or external guide rings should be fully compressed to the guide ring. This will not damage the gasket or affect the sealing performance..
  • Installation Tip: Check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of bolt lubrication is employed..
Check Stock

Bitray SA8T/K Rod End Bearing 8mm Inside Dia Male Thread Right Hand Self Lubricating Bearing - 4PCS

  • ◎【MATERIAL】 The rod end body is carbon steel, the galvanized environmentally friendly white zinc gasket material is copper inner ring (copper ball) material is bearing steel, quenched, the spherical surface is hard chrome plated, and there are left and right thread..
  • ◎【DIMENSION】Outside Diameter: 24mm.
  • ◎【PACKAGE INCLUDEDS】4 pcs x Rod End Bearing.
  • ◎【WIDELY APPLICATION】Widely used in machinery, power tools,automation equipment, CNC equipment, and so on..
  • ◎【CAUTION WHEN USING】 Where the press is missing or unavailable, the end sleeve joint bearing can be installed with an assembly sleeve and a hammer. The hammering force should be evenly transmitted to the entire circumference of the end surface of the end rod joint bearing ring, so the hammered end surface of the assembly sleeve should be made spherical..
Check Stock