ReviewsRing Terminal Fuse Holder

The Fuse Box

  • ✔️[CONVENIENT INDICATION]When a blown fuse is detected, The related red LED warning light will light up immediately, Remind you to check and replace the blown fuse..
  • ✔️[STRUCTURE]6-way block fuse is applied to ATC/ATO (Middle Size) fuses, Which has positive & negative side, Meaning for every positive terminal screw there's a negative terminal screw ..
  • ✔️[SUPERIOR MATERIAL]Fuse box made of environment friendly PBT material，clear fuse protection cover Insulating cover with black push latch system, easy to open the cover by pressing it. Also this transparent design also helps to add extra protection to your fuse box & fuses,The fuse box holder has LED light indicators and a strong construction.It meets all the standards of an ideal fuse box. It is mechanically strong, insulated, heat resistant and flame resistant.
  • ✔️[CONVENIENT STICKER LABEL]Comes with multifunctional DIY sticker According to the name on the sticker, You can immediately identify which appliance is going wrong, Convenient for examination and repair, Easy to troubleshoot in outdoors and save time.
  • ✔️[WIDE APPLICATION]Widely used in 1 2V/24V car, autos, buses, tankers, ship, marine, truck, vehicle, SUV, yacht, RV, boats etc..
Check Stock

ASI ASIUK5HESILED24 DIN Rail Fuse Disconnect Terminal Block, Screw Clamp, 5 mm x 20 mm, 8 mm Wide, 6.3 Amp, 800V, 26 AWG to 10 AWG (Pack of 50)

  • Compact 5 x 20 mm Fuse holder Terminal Block used in control circuit applications.
  • Low Cost alternative fuse holder terminal block.
  • Includes 24 VDC Blown Fuse LED Indicator.
Check Stock

KICKER 46CXA18001T CXA1800.1 1800 Watt RMS Mono Class D Car Audio Amplifier Bundle with Rockville RWK0CU 0 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC

  • ...pure uninterrupted transfer of power and signal, The solid brass gold plated ANL Fuse Holder offers ideal protection for high powered systems, Strand Count: 4704, BC-5W2 Compliant, , Kit includes:.
  • Kit includes: 17 ft. Frosted Blue 0 gauge power wire W/ seamless crimp ring terminal, 3 ft. Frosted Gray 0 gauge ground wire, 17 ft. Blue 18 gauge remote lead wire, 25 ft. Frosted Clear/Blue 12 gauge flat speaker wire, 17 ft. Triple shielded twisted pair RCA cables, One ANL Fuse Holder W/ 250 amp ANL fuse, One 1/2" black rubber firewall grommet, Two 0 gauge spade terminals, Two black 12 gauge nickel-plated spade lugs, Three blue 12 gauge nickel-plated spade lugs, One black 0 gauge ring terminal.
Check Stock

MTX TNP212D2 12-Inch 400-Watt RMS Dual Loaded 1200-Watt Car Subwoofer Enclosure Audio with Sub Box Mono Block Amplifier and 8 Gauge Amplifier Amp Complete Wiring Installation Kit

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure).
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem.
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
  • Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches.
Check Stock

MTX Magnum MB210SP 10 Inch 400 Watt RMS Dual Car Loaded 200 Watt RMS 800 Watt Max Polymer Coated Cone Subwoofer with Box Enclosure And Wiring Kit

  • SUBWOOFER WITH WIRING KIT: 10" 800 WATT Car Subwoofer Enclosure with Amplifier and Amp Kit.
  • DURABLE ENCLOSURE: Textured Polypropylene Cone.
  • POWERFUL AMP: 250 Watt x 1 Channel @ 4 Ohm.
  • INCLUDES AMP KIT: 20 ft. 8 Gauge Red power cable.
Check Stock

2 Boss CXX10 10-Inch 1600W Car Audio Power Subwoofer Sub and R1100M Monoblock Class A/B Riot Car Audio Amplifier and AKS8 Amplifier Installation Kit

  • SUBWOOFERS: Total Power Output: 800 Watts (1600W per pair).
  • SUBWOOFER SPECIFICATIONS: Free air resonance (fs): 38 Hz.
  • AMPLIFIER: Max Power: 1100 Watt x 1 Channel @ 2 Ohm.
  • AMPLIFER SPECIFICATIONS: Includes bass remote control.
  • Dimensions (L x W x H): 9.125 x 10.4375 x 2.25 inches.
  • WIRING KIT: 20 foot 8 gauge red power cable.
  • 20 foot high performance RCA interconnect.
Check Stock

CT Sounds 1/0 Gauge CCA Complete Amp Wiring Install Kit AMPKIT-0GA-PRO

  • 17ft (5.5 meters) OFC 2-channel dual twisted-pair construction RCA interconnect cable, with black nylon wire loom and satin chrome tips. 17ft (5.5....
  • 3ft (.95 meters) Premium True-spec 0 Gauge OFC black ground wire with seamless ring terminal. 20ft (6.4 meters) OFC 18 Gauge remote turn on lead wire.....
  • One brass ANL/Mini-ANL Fuse-holder with 200A ANL fuse offers ideal protection for high powered systems.
  • 1pc 150A and 1pc 300A ANL fuses are included. One black rubber firewall grommet. Two 8 Gauge nickel plated spade terminals with red/black boots.
  • Four 16 Gauge spade terminals with red/black boots. Four 12 Gauge speaker terminals. Two Red 18 Gauge butt connectors. 10pcs 6” Black zip ties and....
Check Stock

Boss Audio Systems R1100M 1100W Monoblock Class A/B Car High Power Amplifier with Bass Remote Control and AKS8 Amplifier Installation Wiring Kit

  • ...tal harmonic distortion: 0.01 percent.
  • Dimensions (L x W x H): 9.125 x 10.4375 x 2.25 inches.
  • WIRING KIT: 20 foot 8 gauge red power cable.
  • 20 foot high performance RCA interconnect.
Check Stock

NIPPON TUBO8 8 Subwoofer Tube Box w/Charcoal Carpet Covering

  • SUBWOOFER: The subwoofer can fit into any space and features butyl rubber surrond, built in amplifier, vented enclosure design and comes with mounting....
  • SUBWOOFER DESIGN: The Butyl rubber surround increases subwoofer durability. The vented design also increases bass output.
  • SUBWOOFER RECOMENNDATION: 8 gauge power and ground wiring is recommended.
  • AMPLIFIER INSTALLATION KIT: 20 ft. 8 Gauge Red power cable, Competition high quality fuse holder, 1/4" Gold plated ring terminal, 3 ft., 8 Gauge Black....
Check Stock

IN-LINE ANL FUSE HOLDER 4 WAY 1x0GA-4x4GA WITH FUSE DISTRIBUTION BLOCK STEREO/AUDIO/CAR

  • This 100Amp power distribution fuse holder is made out of high quality materials in order to get professional results from your car subwoofer audio system..
  • This fuse block holder designed for high performance car audio systems and other electrical high current applications. The power fuse compartment geared up with a heat-resistant acrylic covers and corrosive resistant materials such as gold-plated finish. The new style engineering design makes your installation safe and stylish..
  • Gold Plating Terminal Fuse Block, 4X100A Fuse Included..
  • Screw terminals hold cables securely in place,Fast and easy installation.
Check Stock

ASI ASIUK5HESI DIN Rail Fuse Disconnect Terminal Block, Screw Clamp, 5 mm x 20 mm, 8 mm Wide, 12 Amp, 600V, 26 AWG to 10 AWG (Pack of 50)

  • Compact 5 x 20 mm Fuse holder Terminal Block used in control circuit applications.
  • Low Cost alternative fuse holder terminal block.
Check Stock