ReviewsRing joint Gasket

E-15 V.3 D2 - Sundown Audio 15 500W RMS Dual 2-Ohm EV.3 Series Subwoofer

  • RE (ohms): 7.75 | FS (Hz): 36.95 | Vas (L): 52.35 | Qes: 0.85 | Qms: 6.63 | Qts: 0.75 | Le (mH): 4.98 | BL (NA): 25.87 | Mms (Grams): 315.
  • Cms (uM/N): 58.8 | Sens (1w/1m): 86.68 | Cutout Diameter: 14 1/8" | Mounting Depth: 7 1/2" | Overall Diameter w/ Gasket: 15 5/8" | Displacement:....
  • Recommended Box Specs (Sealed): 2.5ft^3 (Yields F3 of 41Hz) | Recommended Box Specs (Ported): 3.5ft^3 (Tune to 35Hz, Yields F3 of 28Hz) | 19.0mm....
  • Thick black anodized aluminum voice coil formers for maximum strength and heat dissipation | 4‐layer copper high temperature voice coil windings....
  • Custom tooled triple joint support ring | Custom tooled frame spacer / ventilation ring | High efficiency air‐flow management integrated into the....
Check Stock

Pair Sundown Audio SA-15 Classic D4 15 1500 Watts Dual 4-Ohm SA Series Subwoofers Pair

  • RE (ohms): 7.75 | FS (Hz): 36.95 | Vas (L): 52.35 | Qes: 0.85 | Qms: 6.63 | Qts: 0.75 | Le (mH): 4.98 | BL (NA): 25.87 | Mms (Grams): 315.
  • Cms (uM/N): 58.8 | Sens (1w/1m): 86.68 | Cutout Diameter: 14 1/8" | Mounting Depth: 7 1/2" | Overall Diameter w/ Gasket: 15 5/8" | Displacement:....
  • Recommended Box Specs (Sealed): 2.5ft^3 (Yields F3 of 41Hz) | Recommended Box Specs (Ported): 3.5ft^3 (Tune to 35Hz, Yields F3 of 28Hz) | 19.0mm....
  • Thick black anodized aluminum voice coil formers for maximum strength and heat dissipation | 4‐layer copper high temperature voice coil windings....
  • Custom tooled triple joint support ring | Custom tooled frame spacer / ventilation ring | High efficiency air‐flow management integrated into the....
Check Stock

Towel Ring Brushed Gold Angle Simple SUS 304 Stainless Steel Modern Towel Holder Bathroom Hand Towel Rack Wall Mounted

  • ADD LUXURY TO HOME DECOR: feature simple and flowing curves with fashion deep gold tone, avant-garde without looking too cheesy, demonstrate elegance and romance of modern life.
  • STRONG & DURABLE MATERIAL: use high quality SUS 304 stainless steel construction with brushed gold finish to improve rustproof and tarnish resistance, durable enough for daily use.
  • UTILITY YET LOW-PROFILE O-RING: gasket is hidden in the joint to enhance the aesthetics, reduce abrasion between metals, quietly and smoothly swing back and forth.
  • COMPACT SIZE FOR FLEXIBLE PLACEMENT: 2-3/16"(55mm) between the wall and ring, not stick out too far, leave enough room for air to circulate and dry the towel, work for most spaces.
  • CLEAN UP MESSY SINK AREA: boast a handy towel ring, display towel in a clean and tidy way without occupying countertop, no need to look for towel with wet hands and drip water all over the floor.
Check Stock

MOFANS 2XJ-11311-02-00 66mm Bore Cylinder Top End Kit Piston Gasket Assembly Kit Fit For Compatible With Yamaha Blaster 200 YFS 200 1988-2006

  • ▶ Fitment: Fit For Compatible With Yamaha Blaster 200 YFS 200 1988 89 90 91 92 93 94 95 96 97 98 99 2000 01 02 03 04 05 2006..
  • ▶ Replace Part Number: 2XJ-11311-02-00.
  • ▶ Features: Cylinder Piston Ring Gasket kit with precise density to provide a reliable seal with minimal tightening. Cylinder Piston Ring Gasket kit....
  • ▶ Perfect Replacement: Replacement cylinder piston ring gasket kit sets engineered from premium materials to provide exceptional service life and....
  • ▶ Package Includes: Cylinder + Piston + Wrist Pin +Circlips + Rings + Head Gasket + Base Gasket (as pictures shows)..
Check Stock

Nimiah New Spider Gasket & Cover O-Ring Kit Replacement Hayward Vari-Flo SPX0714CA SP0714T

  • This is the gasket on the SPX0714CA Key Seal and One aftermarket cover o-ring Replacement For SPX0714L.
  • New Southeastern O-ring Gasket Repair Rebuild Kit Replacement For Hayward Vari-flo Valve.
  • Includes Spider gasket (Old Gasket has to be removed and this new one glued in).
  • Includes Cover O-ring Aftermarket Replacement For SPX0714L.
  • A brand-new, unused, unopened, undamaged item in its original packaging..
Check Stock

koodee 3 Pack Replacement Silicone Sealing Rings Gaskets for 17 oz Vacuum Insulated Water Bottle BPA-Free

  • Perfect Replacement: The silicone gasket is fit for 17 oz stainless steel water bottle lids, and the O-ring gasket is made of food-grade silicone, BPA....
  • Tightness: With this O-ring, there is no need to worry about lid leakage. The soft white rubber tightly fixes the lid on the lid for perfect leakproof....
  • Replace the Missing Gasket: Maybe your sealing ring is often loose or lost, then you need such replacement parts very much. No need to replace the lid....
  • Easy to Install and Clean: The replaceable silicone gasket can be easily installed without any tools, just roll down the old gasket and pull on the....
  • Set: The set includes 3 silicone sealing gaskets, which can be replaced at will! We provide you with 12 hours of customer service, if you have any....
Check Stock

DCT Wood Glue Applicator Glue Syringe with Glue Tips – 20 mL Syringe Glue Applicator Wood Glue Syringe for Woodworking

  • For veneering, lutherie, craft and hobby gluing, furniture joints, wicker chairs, wooden screen doors, laminates, cabinetry, stair rails and banisters, floor squeaks, or even jewelry making and cake decorating.
  • Additionally use for mechanical work to place fine beads of silicone gasket material.
  • EASY TO LOAD: Includes an easy fill-port design that allows you to load glue into the chamber two different ways.
  • Method 1 – Unscrew top where handle is, pull out plunger, pour in glue, screw top back on, flip syringe with tip upwards, remove air, screw on your desired tip, and apply.
  • Method 2 – Remove brass tip, submerge this end in a glue container, pull plunger back until full, reinstall brass tip, and apply.
  • EASY TO DISPENSE: Dispensing syringe allows you to apply glue under pressure.
  • If you do not enough space to get glue into a joint on your project, instead of disassembly your project, you can drill a small hole and inject glue through the hole into the joint using this wood glue injector.
  • MAINTENANCE: Moisten O-ring before inserting plunger and screwing brass tip into barrel.
  • Do not allow glue to dry in the injector (injector may be immersed in water to prevent glue from hardening).
Check Stock

Sterling Seal 90003304GR600x24 304 Stainless Steel spiral Wound Gasket with Flexible Graphite Filler, for 3\ Pipe, Pressure Class 600#, Yellow With Grey Stripe (Pack of 24)

  • Sterling Seal Style 9000 stainless steel spiral wound gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Sterling Seal Style 9000 gaskets are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets Excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

Gasket Replacement Rubber Ring Seal Rings Gaskets Part for Nutribullet Replacement Parts Accessories Blender 900 Series 600W and 900W

  • 【Package Include】: Blender Replacement Parts and Accessories - Seal Ring Gasket Replacement with Lip - 3 Pcs. High quality silicone, BPA Free.
  • 【Compatibility】: Seal Ring Gaskets Replacement - Blender Replacement Parts Series 600 / 900 - Compatible with NutriBullet Personal Blender 600 Watt and Compatible with NutriBullet Pro Personal Blender 900 Watt.
  • 【Warning】: Before replacing the gasket, make sure you get out the worn gasket from the blade! This is the most common misunderstanding. Please watch the installation video.
  • 【Pay Attention】: Please check that your seal ring gasket Has the Lip (on Both Sides). Check the dimensions of your blade to be sure. Compatible blade has Outside Diameter - 4.05 inch and Height - 1.57 inch. Dimensions of a gasket installed into a blade: Outside Diameter - 3.9 inch, Inner Diameter - 3.43 inch, Width - 0.235 inch.
  • 【100% Consumer Satisfaction】: For any reason you're not completely satisfied, please do not hesitate to contact us for a replacement or full refund.
Check Stock

Gamma Seal Lids - 12 pk.(Pack of 2)

  • ring snaps to standard 5 gallon (and 3.5 - 7.0 gallon) buckets.. Converts to spin-on, spin-off lid!.
  • Please reference Product Description below.
Check Stock

Sterling Seal 90005304GR150X6 304 Stainless Steel Spiral Wound Gasket with Flexible Graphite Filler for 5\ Pipe, Pressure Class 150#, Yellow with Grey Stripe (Pack of 6)

  • Sterling Seal Style 9000 stainless steel spiral wound gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Sterling Seal Style 9000 gaskets are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets Excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock