ReviewsRip Saws

CMT 251.045.12 ITK General Purpose Saw Blade, 12-Inch x 45 Teeth 1FTG+2ATB Grind with 1-Inch Bore

  • For fast crosscuts on wood and plywood. Good rip cut on wood..
  • To be used on radial arm saws, miter saws, table saws for cutting soft/hard wood and plywood..
  • 0.110 kerf thickness, 0.087 plate thickness, 15° Hook Angle, 1 Flat + 2/15° alternate teeth Grind..
  • Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
  • Laser-cut plate features expansion slots to reduce noise and anti-vibration design..
Check Stock

Thin Rip Jig Table Saw Jig for Making Repetitive Narrow Strip Cuts on Table Saws with 3/4\ x 3/8\ Miter Slots • Also Works with Many Router Tables and Band Saws

  • ...ed workshop use. The jig fits directly into most any standard 3/8” x 3/4” miter slot. The body is made from a solid piece of aluminum and is adjustable inward and outward from your fence depending on the width of your stock..
  • The jig can be used on other workshop machinery like router tables with fences and band saws for re-saw applications. In certain cases, when working with larger or longer stock on table saws or router tables, we recommend using two thin rip jigs behind the blade or cutter for extra stability when feeding your stock through..
Check Stock

JET 725005 Proshop II Fence Assembly

  • COMPATIBILITY: Fits all JET ProShop, ProShop II, and JTAS-10 Table Saws.
  • USE WITH RAIL SETS (SOLD SEPARATELY): 30″ rip (708483) or 52″ rip (708484).
Check Stock

CMT 252.072.12 ITK XTreme Industrial Fine Cut-Off Saw Blade, 12-Inch x 80 Teeth ATB Grind with 1-Inch Bore

  • For fast extra-clean crosscuts and occasional rip as well on wood and plywood..
  • To be used on radial arm saws, miter saws, table saws for cutting soft/hard wood and plywood..
  • 0.110 kerf thickness, 0.087 plate thickness, 15° Hook Angle, 1 Flat + 2/20° alternate teeth Grind..
  • Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
  • Laser-cut plate features expansion slots to reduce noise and anti-vibration design..
Check Stock

6201 - Key Blades and Fixings 10\ x 5/8\ Arbor 40T Saw Blade Table saw Drop saw Blade Teflon Coated Professional Quality saw Blade Best for Quality and Price Saw Stop Compatible

  • For fast rip and crosscuts. Excellent cut on plywood, soft and hardwood..
  • To be used on radial arm saws, miter saws, table saws..
  • 0.102 kerf thickness, 0.071 plate thickness, 18° cutting angle, 10° ATB+Shear grind..
  • Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed..
  • Special Carbide prevents from material failure, Non-Stick Orange Shield protects against corrosion..
Check Stock

Ryoba 9-1/2inch Double Edge Razor Saw for Hardwoods from Japan Woodworker 1.7mm Teeth Pitch

  • Made in Japan with durable long lasting Japanese steel. The blade is impulse hardened for extreme sharpness and long life, then coated for corrosion....
  • Japanese style pull saws are easier to use, and cut very straight and precise lines as compared to push saws.
  • Adjustable pivot point. There is a joint located in between the blade and blade’s tang that permits the blade and handle to be angled to facilitate....
  • The traditional rattan wrapped handle is very functional and has timeless styling.
Check Stock

CMT 256.050.10 ITK XTreme Industrial Combination Saw Blade, 10-Inch x 50 Teeth 4 ATB + 1 FLAT Grind with 5/8-Inch Bore

  • For rip and crosscuts. The large gullets allow deep cuts and effective chip clearance..
  • Cut solid wood, melamine, laminates, plywood, chipboard. Use on radial arm/miter saws, table saws..
  • 0.098 kerf thickness, 0.071 plate thickness, 15° Hook Angle, 1 Flat + 4/20° alternate teeth Grind..
  • Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
  • Laser-cut plate features expansion slots to reduce noise and anti-vibration design..
Check Stock

Gyokucho Ryoba Double Edge Razor Saw Long 240mm Model 650 Blade with New TPE Grip

  • Rip TPI: 7, uses the same blade as the model 650.
  • Made in Japan with durable long lasting Japanese steel. The blade is impulse hardened for extreme sharpness and long life, then coated for corrosion....
  • Japanese style pull saws are easier to use, and cut very straight and precise lines as compared to push saws.
  • Adjustable pivot point. There is a joint located in between the blade and blade’s tang that permits the blade and handle to be angled to facilitate....
  • Brand new TPE grip provides a solid no slip surface in all conditions.
Check Stock

GRR-RIP BLOCK Smart Hook Pushblock for Router Table, Jointer, and Band Saws

  • Auto-retracting heel technology hooks the tail-end of your board.
  • Proprietary Green GRR-RIP for extreme hold.
  • 90-degree flip guide for vertical footing on band saws and router tables.
  • Ergonomic handle exerts directional pressure against the fence.
  • Optional mounts for Deflector/Connector shield plate for additional protection against chip debris.
  • 90-degree flipguide for vertical footing on bandsaws and router tables.
  • Made in the USA. A true MICROJIG Innovation..
Check Stock

Gyokucho Razorsaw 9-1/2 Double Edge Ryoba for Hardwoods

  • Blade length of 9-1/2˝ and an overall length of 23˝.
  • These Ryoba saws are designed for cutting hard or abrasive woods.
  • Offers an exceedingly smooth, accurate cut.
Check Stock

Kreg Straight Edge Guide-4 Ft

  • Crosscut and rip cut up to 4 feet (122cm) in sheet goods.
  • Aluminum guide rail leads cuts precisely along a straight line.
  • Cutline indicators help position cuts perfectly.
  • Built-in clamping with GripMaxx secures rail to material.
  • Works with left- and right-blade circular saws, as well as some jigsaws and trim routers.
Check Stock