ReviewsRiver Stone Sink Basins

Signature Hardware 926817-36 Tegan 36 70/30 Offset Double Basin Copper Farmhouse Sink with Small Bowl Right

  • Farmhouse installation - sink will require special cabinets with an exposed front.
  • Sink features dual basins with a 70/30 basin split.
  • Overall Dimensions: 36" length x 21.875" width x 9.25" height.
  • QUALITY GUARANTEE: Our products are built to last. We proudly stand behind this product with a lifetime warranty and expert customer support..
Check Stock

Signature Hardware 948483 Sitka 33\ Drop In or Undermount 60/40 Double Basin Stainless Steel Single Hole Kitchen Sink

  • Offering a pair of offset basins, the 33" Sitka double-bowl sink brings separation to your kitchen's workspace. Great for a high-traffic kitchen, this product is made of durable, 304-grade stainless steel. On the bowl's underside, sound absorption pads dampen noise made by running water and maneuvering dishes, while the undercoating prevent condensation buildup in the cabinet below. A pre-drilled mounting hole on the back rim accepts your choice of single-hole faucet..
  • Covered under Signature Hardware's limited lifetime.
  • Dual installation – sink can be installed under the counter top or be dropped into a cutout in the countertop.
  • It is recommended to have the sink at the job site before cutting cabinet or counter top.
  • Sound absorption pads on the underside of sink.
  • Has an undercoating to prevent condensation buildup.
  • Basin Dimensions (Left): 17-1/2" L x 16-5/8" W x 10" D.
  • Basin Dimensions (Right): 11-3/4" L x 16-5/8" W x 10" D.
Check Stock

Concession Sinks - Standard Size Electric 3 Compartment with Hot Water for Food Vending Trailer, Hand Wash

  • Overall dimensions 28 ½ ”W x 17”D x 36”H. Cart made of cleanable PVC material (solid plastic) with aluminum legs..
  • 4 NSF approved 22 gauge 18/8 stainless steel sink basins measuring 12 ¾" (front to back) x 6" (wide) x 6" (deep). Total weight is approx. 75 pounds without water..
  • Has 2 Faucets with SPLASH GUARD between hand wash sink and the 3 compartment sinks. Each sink is individually trapped and has recessed drains and strainers..
  • GFCI plug. NSF approved backflow protected commercial pump 115 volt 1.5 gpm. A 2.5 gallon water heater with adjustable temperature range 50F to 140F..
Check Stock

Rev-A-Shelf 19 in Stainless Steel Tip-Out Tray Silver

  • Included: (1) Stainless Steel tray, (1) pair of hinges and mounting hardware - Perfect for otherwise wasted space in your kitchen or bathroom cabinet - Depending on certain sink basins, space could be limited - Requires at least 2-1/4" of clearance between backside of door to front of sink - Stainless Steel trays will not crack, bend, warp o leak - Designed for a cabinet opening width of 20-1/2" or larger - Construction: Heavy Duty stainless steel construction.
Check Stock

Rev-A-Shelf 16 in Stainless Steel Tip-Out Tray Silver

  • Included: (1) Stainless Steel tray, (1) pair of hinges and mounting hardware - Perfect for otherwise wasted space in your kitchen or bathroom cabinet - Depending on certain sink basins, space could be limited - Requires at least 2-1/4" of clearance between backside of door to front of sink - Stainless Steel trays will not crack, bend, warp o leak - Designed for a cabinet opening width of 17-1/2" or larger - Construction: Heavy Duty stainless steel construction.
Check Stock

mDesign Adjustable Kitchen Sink Dish Drying Mat/Grid - Soft Plastic Sink Protector, Cushions Sinks, Dishes - Quick Draining Pebble Design - Includes 1 Saddle, 2 Large Mats - Set of 3 - Red

  • SOFT PROTECTION: Sink saddle and sink mats keep kitchen sinks clean and scratch free.
  • Made of heavy, flexible plastic, the mats stay in place at the bottom of the sink to protect sink surfaces from scratches.
  • The sink saddle is also made of flexible heavy and durable plastic to keep it secure on the sink divider.
  • CUSTOMIZED FIT: The plastic mat grips the sink and stays in place, no more sliding and slipping.
  • The sink grid keeps dishes lifted off of sink surfaces so scratches and marring are a thing of the past.
  • Cut out sections of the design for the sink drain or perfectly fit your sink size.
  • Use in homes, apartments, condos, dorms, RVs, campers and cabins.
  • IMPROVED DRAINAGE: The decorative organic design allows water to flow through so sinks don't become waterlogged or backed up.
  • Water drains quickly and easily for faster air drying.
  • QUALITY CONSTRUCTION: Made of pliable water-safe PVC plastic.
  • Easy Care - clean with mild soap and water.
  • THOUGHTFULLY SIZED: Each Sink Mat Measures: 15.75" x 12".
  • Sink Saddle Measures: 10" x 2" x 5"" high.
  • Saddle fits over sink dividers up to 1.8" / 4.5cm thick.
Check Stock

mDesign Adjustable Kitchen Sink Dish Drying Mat/Grid - Soft Plastic Sink Protector, Cushions Sinks, Dishes - Quick Draining Circle Design - Includes 1 Saddle, 2 Large Mats - Set of 3 - Light Gray

  • SOFT PROTECTION: Sink saddle and sink mats keep kitchen sinks clean and scratch free.
  • Made of heavy, flexible plastic, the mats stay in place at the bottom of the sink to protect sink surfaces from scratches.
  • The sink saddle is also made of flexible heavy and durable plastic to keep it secure on the sink divider.
  • CUSTOMIZED FIT: The plastic mat grips the sink and stays in place, no more sliding and slipping.
  • The sink grid keeps dishes lifted off of sink surfaces so scratches and marring are a thing of the past.
  • Cut out sections of the design for the sink drain or perfectly fit your sink size.
  • Use in homes, apartments, condos, dorms, RVs, campers and cabins.
  • IMPROVED DRAINAGE: The decorative organic design allows water to flow through so sinks don't become waterlogged or backed up.
  • Water drains quickly and easily for faster air drying.
  • QUALITY CONSTRUCTION: Made of pliable water-safe PVC plastic.
  • Easy Care - clean with mild soap and water.
  • THOUGHTFULLY SIZED: Each Sink Mat Measures: 15.6" x 12.5".
  • Sink Saddle Measures: 10" x 2" x 5" high.
  • Saddle fits over sink dividers up to 1.8" / 4.5cm thick.
Check Stock

Signature Hardware 948481 Sitka 33\ Drop In or Undermount 60/40 Double Basin Stainless Steel 4-Hole Kitchen Sink

  • The 33" Sitka double-bowl sink has offset basins that provide separate working spaces. Great for a high-traffic kitchen, this product is made of durable, 304-grade stainless steel. On the bowl's underside, sound absorption pads dampen noise made by running water and maneuvering dishes, while the undercoating prevent condensation buildup in the cabinet below. Four pre-drilled mounting holes on the back rim accepts your choice of widespread faucet with a side spray..
  • Covered under Signature Hardware's limited lifetime.
  • Dual installation – sink can be installed under the counter top or be dropped into a cutout in the countertop.
  • It is recommended to have the sink at the job site before cutting cabinet or counter top.
  • Sound absorption pads on the underside of sink.
  • Has an undercoating to prevent condensation buildup.
  • Basin Dimensions (Left): 17-1/2" L x 16-5/8" W x 10" D.
  • Basin Dimensions (Right): 11-3/4" L x 16-5/8" W x 10" D.
  • Faucet Centers: 8" (distance between the installation holes for the faucet handles).
Check Stock

Rev-A-Shelf Polymer Slim Tip Out Tray for Sink Base Cabinets, Standard, White

  • Included: (2) White trays, (2) pair of hinges and mounting hardware - Perfect for otherwise wasted space in your kitchen or bathroom cabinet - Depending on certain sink basins, space could be limited - Requires at least 1-3/4" of clearance between backside of door to front of sink - Designed for a cabinet opening width of 15-1/2" or larger - Construction: Injection molded polymer plastic designed for durability.
Check Stock

Signature Hardware 948486 Ortega 33\ Drop In or Undermount 50/50 Double Basin Stainless Steel 4-Hole Kitchen Sink

  • Designed for a busy kitchen, the 33" Ortega double-bowl sink has evenly split basins that provide separate working spaces. This product is made of durable, 304-grade stainless steel. On the bowl's underside, sound absorption pads dampen noise made by running water and maneuvering dishes, while the undercoating prevent condensation buildup in the cabinet below. Four pre-drilled mounting holes on the back rim accepts your choice of widespread faucet with a side spray..
  • Covered under Signature Hardware's limited lifetime.
  • Dual installation – sink can be installed under the counter top or be dropped into a cutout in the countertop.
  • It is recommended to have the sink at the job site before cutting cabinet or counter top.
  • Sound absorption pads on the underside of sink.
  • Has an undercoating to prevent condensation buildup.
  • Basin Dimensions (Left): 14-5/8" L x 16-5/8" W x 9" D.
  • Basin Dimensions (Right): 14-5/8" L x 16-5/8" W x 9" D.
  • Faucet Centers: 8" (distance between the installation holes for the faucet handles).
Check Stock

Rev-A-Shelf 14-1/4 in Stainless Steel Tip-Out Tray, Silver

  • Included: (1) Stainless Steel tray, (1) pair of hinges and mounting hardware - Perfect for otherwise wasted space in your kitchen or bathroom cabinet - Depending on certain sink basins, space could be limited - Requires at least 2-1/4" of clearance between backside of door to front of sink - Stainless Steel trays will not crack, bend, warp o leak - Designed for a cabinet opening width of 15-1/2" or larger - Construction: Heavy Duty stainless steel construction.
Check Stock