ReviewsRobot Arm Controller

KST DS215MG Micro Digital Servo

  • 100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • It is tiny and lightweight with high output power..
  • Compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control..
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats..
Check Stock

KEYESTUDIO Robot Arm Starter Kit for Arduino Coding Robotics Kit for Adults Teens 15+ Electronic Programming Project STEM Education

  • This is a robot arm kit suitable for electronic programming enthusiasts over 12 years old. If users have the theoretical basis of electronic programming, they can quickly master it. If you are interested in the working principle of the robot arm, this kit is a very good choice..
  • There are 3 controlling methods as follows: 1) Controlling through Wired JoyStick (included in the kit).
  • 3) Wireless PS2 JoyStick Control (Not Includes PS2 JoyStick module,but provides with the code).
  • We are responsible for product quality, and we are responsible for the quality of all electronic components in the kit. If you encounter any problems during use, please feel free to contact me. We provide timely technical support response services..
  • The robot arm kit contains a HC-06 Bluetooth module, which can control the robot arm through the mobile phone Bluetooth APP. (Only supports Android phones). Please NOTE : the battery is not included in the kit, please prepare it yourself..
Check Stock

California JOS10 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm,Hand,Walking Helicopter Airplane Car Boat Control, Micro Servos Arduino Project (with 20CM Dupont M-F Cable)

  • ✅SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on Arduino ,Raspberry Pi.
  • ✅Stall Torque (4.8V): 17.5oz /in (1kg/cm) Dead band width: 7usec.
  • ✅Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 ± 0.01 sec/60°(4.8V ) 0.08 ± 0.01 sec/60°(6V). Maximum angle: 120°.
  • ✅Amplifier type:Analog controller Operating voltage: 4.8V~6.0V.
Check Stock

GILOBABY Remote Control Robot 2.4GHz RC Robot Toy for Kids with Shine Eyes Dance Moves Toy for Kids Boys Girls 5-8 Yellow

  • 【6 wheels under the feet】Equipped with 3 wheel per foot, total 6 wheels, Smooth walking..
  • 【2.4g Remote Controller】Rc robot toys with 2.4g remote controller can go forward/back,turn left/right, funny robot for kid to play..
  • 【Dancing & Shine Eyes】Rc robot toys with shine eyes, can dance, will provide hours of fun to kids..
  • 【Flexible head & hands】Rc robot toys with Flexible head& hand, can make different postures. Rc robot required 3*AA battery (NOT INCLUDED),....
  • 【Safe Material & Funny Gifts】Made of high-quality and non-toxic and environmental plastic material, Safe and durable.
Check Stock

AMERICAN NEEDLE New Raglin Rainier Beer Baseball Dad Buckle Strap Hat (PBC-1911C-CHRO)

  • Playset featuring Superman and his robot Exoskeleton Suit, plus Brainiac figure with a secret trick – a Kryptonite rock.
  • Kids can place Superman figure in the robot suit to head into battle.
  • Close the cockpit door or roll the robot along the activate cool lights and sounds.
  • Slide the lever to work the robot's claw arm or use the buttons on the other arm to aim and launch projectiles (Includes 1 projectile).
Check Stock

Batman Vs. Superman Rock 'Em Sock 'Em Robots 2-Player Kids Game, Fighting Robots Action Game [Amazon Exclusive]

  • Playset featuring Superman and his robot Exoskeleton Suit, plus Brainiac figure with a secret trick – a Kryptonite rock.
  • Kids can place Superman figure in the robot suit to head into battle.
  • Close the cockpit door or roll the robot along the activate cool lights and sounds.
  • Slide the lever to work the robot's claw arm or use the buttons on the other arm to aim and launch projectiles (Includes 1 projectile).
Check Stock

Yahboom Jetson TX2 NX Development Kit,N-VIDIA TX2 Xavier NX Core Board Module, 2.5 Times The Performance of Jetson Nano

  • 【Cost-effective motherboard solution】The NVI-DIA Jetson TX2-NX delivers up to 2.5 times the performance of the Jetson NANO in the same form factor and pin compatibility. It is a rare and cost-effective development board solution..
  • 【Applications】TX2-NX development kit provides developers, engineers, and students with an affordable new option with greatly improved performance.Is the first choice for developing ROS educational robot, AI Computational Neural Network-SDK, AI edge computing Kit, vision robotic arm, ROS bionic robot.
  • 【Packing list】 The kit includes the installed jetson tx2-nx development board, power adapter, 2.4G/5G blue-tooth and wifi dual-band wireless network card, 128G solid state drive and corresponding cooling package.
  • TX2-NX consists of N-VIDIA's official core module and Yahboom carrier board. It combines the advantages of the Jetson Xavier NX developer kit and the Nvidia Jetson TX2 developer board kit to provide a cost-effective and powerful main controller for electronic enthusiasts, makers, and robot players. The size is only 100 mm x 80 mm x 29 mm, does not support TF card, comes with 16G eMMC. We provide 128GB SSD solid state drive for free, so that users have enough space for development and usage..
Check Stock

Premium 4wd Smart Robot Car Chassis Platform Kit for Arduino/Raspberry Pie/MicroBit DC Electric Motor with Plastic TT Motor Tire Wheel 3-6V Dual Shaft Gear Motor TT Magnetic Gearbox Engine Black

  • 【Improve the Hands Ability】: This 4wd robot car chassis is a good helper for DIY makers. The car chassis is NOT assembled, but it is not difficult....
  • 【Robot Controller Leaning】: Controller is the core of the robot car. After get this chassis and install it, you can know the the robot controllers....
  • 【AI Robot】: AI is now the most hot topics. So, based on this basic robot platform, you also can know the AI knowledge. For example, voice control....
  • 【Metal Frame】: This car frame kit is equipped with metal frame, which is not easy broken similar to the acrylic plate. And the car panel is....
  • 1pcs * metal platform, 4* wheels, 4* TT motors with encoder and 1set * screw kit, please check the "shipping....
Check Stock

Makeblock Robotic Arm Add-on Pack for Starter Robot Kit-Blue

  • Expanded upon Makeblock Starter Robot Kit to build a Robotic Arm Tank or Robotic Arm Car.
  • All parts of the robotic arm are included.
  • Largest open size of robot gripper is 76mm.
  • Motor for the gripper will stop when it is fully opened and closed.
Check Stock

Miuzei 10 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm/Hand/Walking Helicopter Car Boat Control with Cable, Mini Small Servos for Arduino Project

  • Application Fields: Miuzei SG90 9G Servo Motor Compatible with Remote Control Helicopters, Micro Robot, Robot Arm and Boats. Support All Kind of R/C Toys and Arduino Experiments.
  • Interface Type: This SG90 Servo Compatible With JR & Futaba Interface. Miuzei Micro Servo 9g no Load Running Speed: 0.09±0.01 sec/60° at 4.8V.
  • Miuzei Micro Servo Motor Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • NOTE: The Starting Current of The Analog Servo Motor Should Be Over 1A and Miuzei Servo SG90 are Analog Servos Need to Continuously Provide a PMW Signal, Then it Will Be Work Normally.
  • How to Reach 180 degree -- Miuzei SG90 9g Servo Motor Need to Meet 4.8V Power Supply Voltage and 2500usec Pulse Signal, the Angle of Rotation.
Check Stock

Aluminum Box, Printed Circuit Board Instrument Aluminum Cooling Box DIY Electronic Project Shell

  • This is a economical, powerful, easy-to-use mechanical arm learning kit for Arduino..
  • Ideal robot arm DIY assembly kit for college students, middle school students, DIY enthusiasts, etc..
  • 4 degrees of freedom robot arm with more untrammeled and flexible experience..
  • The control board adopts for UNO R3 original edition, and there are numerous learning materials in the network..
  • After connecting the computer with USB cable, you can send commands through the serial port to control the movement of the arm..
Check Stock