ReviewsRobot Breakout Board

AITRIP 12PCS TCA9548A I2C IIC Multiplexer Breakout Board Module 8 Channel Expansion Development Board for Arduino

  • The TCA9548A adapter is connected to an I2C device with multiple identical addresses on the same I2C port on the main control board for normal communication and use.There are 8 I2C interfaces on one expander, and there are eight bidirectional transfer switches that can be controlled by I2C bus. This means that after 1 expander is transferred, 8 identical addresses can be connected to the same I2C port..
  • Expansion board TCA9548A compatible with IIC bus and system management bus (SMBus), active low reset input, support for hot insertion, low standby current, no glitch during power-up, support for voltages between 1.8V, 2.5V, 3.3V and 5V buses Level shifting, TCA9548A I2C IIC multiplexer breakout board depending on the contents of the programmable control registers, any single SCn/SDn channel or combination of channels can be selected..
  • 12pcs TCA9548A I2C IIC Multiplexer Breakout Board 8 Channel Expansion Board for Arduino.
Check Stock

Treedix USB to TTL Converter CH340 Module 3.3V/5.5v Serial Converter Development Tool with Micro USB Adapter for Arduino

  • Serial Basic Breakout Board CH340G serial signal serial ic breakout development board usb micro b connector save space diy electronics projects micro b cable jumper wires.
  • Base on USB converter IC CH340G, there is a wide range of operating systems . You may need to install drivers the first time you connect the chip to your computer's USB port or when there are operating system updates..
  • The output voltage is 3.3v by default, there is a 3.3v signal, it can also be changed to 5V, changing to 5V will cause the board to output 5V and 5V signals on the VCC pin(3 .3v to 5V by a short circuit selection).
  • There are two LEDs on the board connected to TX (green) and RX (yellow) for faster viewing of serial traffic.
  • Suitable for: Arduino Pro Mini, our GPS module, cellular module and many other devices that use serial communication.
Check Stock

3 Axis Stepper Motor CNC Router Kit Nema23 425oz-in 112mm Dual Shaft+CW5045 Driver 4.5A 256 microstep+400W 36V Power Supply CNC Controller Kit for Engraving Lathe Plasma Milling Drilling Machine

  • ♞【Product】3 Axis nema23 stepper motor driver controller kit.
  • ♞【Application】This cnc kit are widely used in engraving machine, printer,....
  • ♞【Stepper Motor】23HS2430B Nema23 57 stepper motor.
  • ♞【Driver】CW5045 driver Voltage: DC 24-50V.
  • Current: rated maximum output reaches: ±4.5A.
  • ♞【5 Axis Breakout Board】5 Axis breakout boad with cables,this breakout board needs to be connected to the parallel port and USB port of the....
  • ♞【Power supply】400W,36V/9.7A switching power supply.
Check Stock

C25S - Smooth Stepper Terminal Board

  • Full access to all the pins of the Smooth Stepper Board. Connects directly to the Smooth Stepper (from Warp9). The board is provided with sockets that allow the Smooth Stepper Board to be plugged directly into this board. No ribbon cables required. When using the Smooth Stepper board there is no need to use an additional power supply to power the board. It will draw power from the Smooth Stepper board. Built-in Passive Low Pass Filters for the all inputs..
  • C25 Smooth Stepper Breakout Board with push lock terminals.
Check Stock

Treedix RPi GPIO Terminal Block Breakout Board Module Expansion Board Compatible with Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W

  • Easy to operate: Use this module to easily extend the Raspberry pi Zero project to the Internet of Things or industrial control applications.
  • There is a mark on the breakout board that can clearly identify the pin position, Breakout board is of excellent quality and adopts double-sided gold forming process.
  • The module is small in size and does not occupy other space. It is very convenient when making DIY circuits, and the wires can be easily inserted into the terminals.
  • Compatible with Raspberry Pi: This GPIO terminal block is compatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, Pi Zero-W.
  • Note: This project needs to be welded and assembled by yourself.
Check Stock

MUKIKIM TracerBot Set (2 Robot Set) – Mini Inductive Robot That Follows The Black Line You Draw. Fun, Educational, and Interactive STEM Toy! Includes Trail Map, Dry Erase Board, and Playbook

  • HIGH TECHNOLOGY IN THIS TINY ROBOT: Light sensors help TracerBot detect and follow the marker trail automatically. Its micro computer tells it what to do without losing track and will follow the line back to the start! Your robot knows where to go!.
  • STEAM EDUCATION SET FOR YOUR KID: TracerBot’s interactive play helps develop logical/critical thinking and problem solving skills! Play with 2 robots (Red and Green) at once to make the tasks more challanging and fun! Design the pathways so the robot can correctly follow the lines with specific orders, loops or patterns, and complete the task! Challenge yourself… and your robots!.
  • MAKE YOUR IMAGINATION COME TRUE: Help the mini robot create a city! Show your creative idea to scheme the map, design the layout and draw routes on the included Dry Erase Board (Reusable), and let the robot roam in your imaginary world!.
  • SCIENCE IS EASY&FUN: This science toy set comes with 2 Robots (Red and Green.
  • 4 button batteries installed in each), 2 Dry Erase Pens, Trail Map and Dry Erase Board, and a Playbook. TracerBot is durable, small, light and easy to carry. Follow the instructions of the included Playbook to accomplish different exercises (coding activities, pattern designs, etc...). Simply draw a course on the....
Check Stock

Indominus Rex Breakout - Jurassic Song

  • Hours of creative role-play fun awaits children with this Dr. Wu´s Lab: Baby Dinosaurs Breakout (75939) toy playset, featuring a detailed,....
  • Kids can dream up exciting Jurassic World stories of scientific breakthroughs and dinosaur escapes with 2 minifigures – Owen Grady and Dr. Henry Wu....
  • Features a knock-down ‘glass' wall function, brick-built dinosaur egg incubator, microscope and adjustable robot arm, laptop element, pop-up panel....
  • There are so many ways to play with this 164-piece building kit, making it a brilliant birthday present or holiday gift for creative boys and girls....
  • The lab measures over 3” (10cm) high, 8” (22cm) wide and 3” (8cm) deep – a compact size to pack in a bag for play on the go – and combines....
Check Stock

Atomic Pi Developers Kit

  • Powerful Atom quad-core processor with 2Gb ram and 16GB Flash on board.
  • Developer kit includes large breakout board and AI camera module.
  • Gigabit Ethernet, AC WiFi, Bluetooth, Hi Performance Audio, USB-2, USB-3, SD, GPIO.
  • Peripherals include 9-axis sensor, bluetooth and XMOS audio power-amp.
  • Boots Linux right out of the box. What will you make with it?.
Check Stock

Stanky Legg Remix - Instrumental feat Big Tease

  • Hours of creative role-play fun awaits children with this Dr. Wu´s Lab: Baby Dinosaurs Breakout (75939) toy playset, featuring a detailed,....
  • Kids can dream up exciting Jurassic World stories of scientific breakthroughs and dinosaur escapes with 2 minifigures – Owen Grady and Dr. Henry Wu....
  • Features a knock-down ‘glass' wall function, brick-built dinosaur egg incubator, microscope and adjustable robot arm, laptop element, pop-up panel....
  • There are so many ways to play with this 164-piece building kit, making it a brilliant birthday present or holiday gift for creative boys and girls....
  • The lab measures over 3” (10cm) high, 8” (22cm) wide and 3” (8cm) deep – a compact size to pack in a bag for play on the go – and combines....
Check Stock

Yahboon Ackerman Steering Structure Smart Robot with Jetson Nano ROS Professionally Programmable Car Kit Rosmaster R2

  • Competition-level Ackerman steering structure: Rosmaster R2 robot car uses the steering method of modern cars and adopts aluminum alloy Ackerman chassis structure. When the robot car turns, the angles of the inner and outer wheels are different, and the turning radius of the inner tire is less than The turning radius of the outer tires can maximize the performance of the robot car..
  • Rosmaster R2 has 3 versions (Standard, Superior, Ultimate), which can be used with 4 development boards (Raspberry Pi 4B, Jetson Nano 4GB, Jetson TX2-NX, Jetson Xavier NX), please pay attention to whether the version you choose includes development board. If you need to reduce the hardware in the kit (eg: depth camera, radar, etc.), contact Yahboom first for assistance..
  • ROSMASTER R2 based on robot operating system. It is equipped with high-performance hardware configuration such as lidar, depth camera, and voice interaction module. It can realize applications such as robot motion control, remote control communication, mapping and navigation, following obstacle avoidance, Autopilot, human body feature action recognition, and voice interactive control. Yahboom will provide tutorials, source code and professional technical support ..
  • Multi-platform linkage: rosmaster X3 suppor....
Check Stock

4 Axis Stepper Motor Nema 23 Dual Shaft 425oz-in 112mm+CW5045 Driver 4.5A 256 Microstep+5 Axis Breakut Board+400W 36V Power Supply CNC Controller Kit for CNC Router Engraver Milling Machine

  • ♞【Stepper Motor】4pcs 23HS2430B nema23 stepper motor.
  • ♞【Stepper Motor Driver】4pcs CW5045 driver, current: 1.3A-4.5A.
  • Driver microstep: 1 (1.8°), 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256, 1/5,....
  • ♞【Control Board】1pcs 5 Axis breakout boad with cables,this breakout board needs to be connected to the parallel port and USB port of the....
  • ♞【Power supply】1pcs 400W,36V/9.7A switching power supply.
  • ♞【Application】This cnc kit are widely used in engraving machine, printer, medical equipment, embroidery machine, stage lighting, textile....
Check Stock