ReviewsRobotic Kits With Raspberry Pi

LoveRPi Power-Over-Ethernet (PoE) HAT Kit for Raspberry Pi 3 Model B+ with Black Case

  • ULTIMATE POWER OVER ETHERNET HAT FOR RASPBERRY PI 3 B+: Deliver clean and reliable power to the latest Pi 3 Model B+ by removing the problematic MicroUSB plug altogether! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters..
  • BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 3 Model B+ boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market..
  • POWER OVER ETHERNET SWITCH REQUIRED: Network switch must be compliant with IEEE 802.3af PoE standard. PoE power output must be within the budget of the switch when powering multiple boards. PoE switch and Raspberry Pi 3 Model B+ sold separately..
  • ANODIZED HEATSINK AND VENTILATED CASE WITH COOLING FAN INCLUDED: Raspberry Pi 3 Model B+ gets very hot and active cooling is the only way to prevent temperatures from exceeding 150°F! This kit includes everything you need to keep your PoE powered board operating at maximum performance. Raspberry Pi 3 Model B+ sold separately!.
  • NOT COMPATIBLE WITH RASPBERRY PI 4 OR RASPBERRY PI 3 MODEL B AND OLDER MODE....
Check Stock

SmartiPi Touch Pro - Case for The Official Raspberry Pi 7 Touchscreen Display - with Cooling Fan

  • Works with the Official 7" Raspberry Pi display and Raspberry Pi B+,2B,3B,3A+,3B+, and 4.
  • Includes a cooling fan with rubber vibration mounts.
  • Works with Raspberry Pi HAT boards and has secondary mounting points for your own development board.
  • Raspberry Pi, Raspberry Pi camera, and Raspberry Pi display not included.
  • Port blocking part to cover the Raspberry Pi ports included.
Check Stock

kuman RPi GPIO Breakout Expansion Board + Ribbon Cable + Assembled T Type GPIO Adapter 20cm FC40 40pin Flat Ribbon Cable for Raspberry Pi 3 2 Model B & B+ SC05

  • Assembled RPI GPIO with 8" 40 pin ribbon cable for Raspberry Pi 3B, Raspberry Pi 2 model B, Raspberry Pi 1B+, Raspberry Pi 1a+, Raspberry Pi zero w, Raspberry Pi zero.
  • 40 pins are labeled for easy prototyping.
  • Gpio adapter plus for Raspberry Pi B+, Raspberry Pi 2, Raspberry Pi is not included.
Check Stock

GeeekPi Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano (8-Layers)

  • Wide Application --- The new 8-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
  • Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
  • This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
  • With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
  • Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberry Pi 3B+/3B/2B/B+..
Check Stock

Raspberry Pi Kit, Raspberry Pi 4 Laptop, CrowPi2 Programming Laptop - Advanced Kit

  • This is the Crowpi2 advanced kit, it contains Raspberry Pi 4B 4GB. Power bank not included..
  • Raspberry Pi Kit --- CrowPi2 is a great kit for learning Raspberry Pi 4B. It can be used as a small personal computer to learn or advance one's programming skills with the lessons included and programming games..
  • CrowPi2: Raspberry Pi 3, Raspberry Pi 3b or Raspberry Pi 3 b+ can be applied, but it may be a bit stuck, so we still recommend you to use Raspberry Pi 4B. (Advanced Kit included Raspberry Pi 4B 4GB).
  • Programming Kit --- 76 lessons and 20 creative projects are teach you how to start coding. Face recognition and speech recognition lessons will teach you how to build AI projects. Minecraft lessons and 18 small games for you to explore..
  • All-in-one Board Kit --- Raspberry Pi learning kit with 22 kinds of sensors and modules are all under one kit. Great for computer labs and classes that want to control a clean environment..
  • Excellent Build Quality --- Raspberry Pi Laptop is exceptionally well planned, designed and manufactured. It’s compact enough to put into a laptop bag and take anywhere that you want to go..
  • 【Comprehensive After-sales Service】If you have any technical questions or product suggestions, please contact us, we will solve all problems....
Check Stock

GeeekPi Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano

  • Wide Application --- The new 4-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
  • Simple Installation --- The long fixing screws are designed with flat head screws, smooth and easy to install. The fool-proof design of the positioning holes can prevent you from having trouble during installation. A variety of screws with different specifications can meet your various product fixing needs. For example, Raspberry Pi, 2.5-inch hard drive, 3.5-inch hard drive, Jetson Nano and so on..
  • Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
  • This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
  • With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
  • Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberry....
Check Stock

GeeekPi New Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano (12-Layers)

  • Wide Application --- The new 12-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
  • Simple Installation --- The long fixing screws are designed with flat head screws, smooth and easy to install. The fool-proof design of the positioning holes can prevent you from having trouble during installation. A variety of screws with different specifications can meet your various product fixing needs. For example, Raspberry Pi, 2.5-inch hard drive, 3.5-inch hard drive, Jetson Nano and so on..
  • Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
  • This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
  • With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
  • Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberr....
Check Stock

sb components Raspberry Pi Pico Board with Raspberry Pi Pico GPIO Expansion Board, Multi-Purpose Raspberry Pi Pico Kit

  • Raspberry Pi Pico is Raspberry Pi's first microcontroller board, designed especially for physical computing.
  • It can be easily reprogrammed over USB from a Raspberry Pi or other computer using the C/C++ SDK or the official MicroPython port.
  • Raspberry Pi Pico GPIO Expansion Board is used to break outall the pins and power of the Raspberry Pi Pico development board via male or female headers.
  • Raspberry Pi Pico GPIO Expansion Board allows the user to connect it to other components with the help of a jumper wire.
  • Raspberry Pi GPIO Expansion Board is specially made to work with the Raspberry Pi Pico Board.
Check Stock

System/370 Job Control Language

  • ... a standard USB port, if your program or application accepts USB controller input, it can be used natively without drivers or patches, JUST PLUG AND PLAY! Cord is approx. 5.9 ft. Long. Super sensitive buttons for precision control. Third party controller, not original 64 controller. But it works phenomenal with the Raspberry Pi game emulation and so on..
  • Supported Operating system: Windows 98, ME, Vista, 2000, 2003, XP, 7, 8, 8.1, 10.
  • Linux UBUNTU, Linux Mint, Android Linux (via an USB OTG cable).
  • Retrogaming operating systems: RetroPie, Recalbox, Happi Game Center, Lakka, ChameleonPi, Piplay.
  • Supported Device (With USB storage device): PC, Notebook Computer, Laptop Computer.
  • Android Smartphone: connect via an USB OTG cable.
  • Raspberry Pi (RPI, Raspberry pie): Raspberry Pi 1 Model B, Model A, Raspberry Pi 1 Model B+, Raspberry Pi Zero, Raspberry Pi 2, Raspberry Pi 3 Model B, Raspberry Pi 3, Retro Pie. — Note: NOT SUPPORT Android TV BOX..
  • Supported Game Emulators: Current: Project64, 1964, MAME (MESS), Mupen64Plus, Sixtyforce, CEN64.
  • Historical: Project Unreality, Corn, UltraHLE, Nemu64.
  • Reliable Warranty: 100% Money Back Guarantee.
  • hassle free 6-month replacement warranty with friendly and professional customer service. If you have ....
Check Stock

Vilros Raspberry Pi 4 Compatible Use and Store Accessory Set (Black)

  • INCLUDES: Use and Store Case (Black)--Vilros Raspberry Pi 4 Compatible Power Supply--Vilros 1.8M HDMI-MIcro HDMI Cable--Vilros Heatsink for Pi 4 (Set of 4)--Vilros Raspberry Pi 4 Quick Start Ebook Download Code--Screwdriver and Screws--DOES NOT INCLUDE A RASPBERRY PI MOTHERBOARD.
  • USE AND STORE: Designed for the Raspberry Pi 4 the Use and store case makes it easy to use your pi as well as store all your accessories when not in use--the case also features a preinstalled fan that is easily connected to the Pi.
  • POWER SUPPLY :The Vilros USB-C 5.1V 3A Power Supply was Designed for the Raspberry Pi 4 and Features a 5FT cable with an Inline ON/OFF Switch to make it easy to turn the Pi on and off.
  • HDMI-MICRO HDMI CABLE: The Vilros 1.8M HDMI/Micro HDMI Cable will connect your Raspberry Pi 4 Board to any HDMI monitor.
  • EASY TO SET UP: Includes a EBOOK download code for the Vilros Raspberry Pi Quickstart Guide 2nd Edition (Updated for Pi 4) --also includes a screwdriver, screws and clear instructions for assembly..
Check Stock

kuman 3.5 Inch Touch Screen with Protective Case 320x480 Resolution TFT LCD Display for Raspberry Pi 3B+ 2B B+

  • The 3.5 in touch screen can support two screens simultaneous display(the Raspberry Pi can be connected to this screen and another HDMI screen at the....
  • This 3.5 inch resistive touch screen can be directly inserted into the Raspberry Pi B+, 2B, 3B, 3B+. Raspberry Pi is not included. It also can work....
  • The Raspberry Pi screen can work with fbcp software driver, you can adjust the resolution by the software (The RPI screen original resolution is....
  • The Raspberry Pi Display support 125MHz SPI signal input, It can display stable without Flicker. When it work with Raspberry Pi, the refresh rate is....
  • This LCD display comes with the PC protective case, which protect your raspberry Pi from Raspberry Pi from shocks, scratches and dust..
Check Stock