ReviewsRod Clamp

Drum Set Clamp, Iron Connecting Clamp Holder Bracket Rod Percussion Drum Set for Cowbell Accessory Silver cowbell holder garabltar rack

Clamp can be used for connecting cowbells, except for connecting drum set as clamp holder..
Fine workmanship and shining design, made of iron and looks beautiful in silver..
With a connecting rod of 12cm, practical and easy to use and to operate..
If you are a drum set enthusiast, don't miss this great accessory!.
Professional drum set accessory, you will find its benefits in many ways..

Check Stock

Cowbell Mounting Clamp with L rod for Drum Set - ROSS Percussion

5/8" to 1 1/4" multi clamp with adjustable L rod. Adjust length 5.75 to 7.25 inches from the centre of the multi clamp and adjust angle up to 180 degrees..
Great for mounting a cowbell, tambourine, jam block or other percussion accessory.
Mount to cymbal stands or other suitable drum hardware to customize your set up.
Add any percussion accessory that can fit the 3/8" L rod.
Durable and build to last. ** Cowbell NOT included **.

Check Stock

NICEYRIG Rosette Leather Handles with 15mm Rod Clamp Connector for 15mm DSLR Camera Shoulder Rig Support System

The camera handle kit with rosette is compatible with 15mm shoulder pad rig rod support system. More stable for 15mm shoulder rig system..
The rosette (M6 Thread Diameter 31.8mm) on the handle is replacement for ARRI rosette. The length of the handle is 145mm (5.7inch )..
The spacing of the dual 15mm rod clamp between the 15mm holes is 60mm fitting standard equipment..
The wingnut on the handle and 15mm rod clamp loads spring. You could pull it outside if you don't have a space to rotate..
Made of anodized aluminum alloy and cow leather, durable, soft, comfortable and lightweight..

Check Stock

Chemistry Laboratory Stand Set, with Support Stand (21x14cm), 2 Retort Rings (Dia. 5cm/7.3cm), Rod (Length 40cm) and Flask Clamp

Convenience - Comes with 1 round-jaw burette clamp and 2 retort rings (Dia. 6cm and 8cm) for your better convenient work. This chemistry stand with clamp eliminating the need to piece together a system for your classroom or lab. Everything is in one box..
With stainless steel corrosion resistant rod (Length 40cm) the rod diameter is 1 cm and solid black coated support stand base (21cmx14cm), this lab metalware set provides a stable and safe support to your lab work..
High Quality - Made of high quality anti-corrosion & rust-proof stainless steel, this retort stand with clamp is built to last. Padded base prevents scratches on the surface and maintains a much required grip during experiments..
The rod of this Ring Stand comes with a loose & small grip lever to properly screw it in the base.Padded base prevents scratches on the surface and maintains a much required grip during experiments.
Mainly Used For Physics & Chemistry Experiments, Like: Filtration, Heating, Titration. Portable To Carry, Suitable For Research Or Teaching Tasks.

Check Stock

NICEYRIG 15mm Rail Riser Rig System Quick Release Base Kit with QR Plate 15mm Rod Riser Clamp Short Rods Applicable DSLR Camera

... There is off-rail prevention on the quick release base, preventing QR plate from removal accidental. The wingnut with the ability to change the position of the knob to tighten or unscrew to make the QR plate quick release..
The 15mm rod riser clamp (with 15mm rods in vertical and horizontal) is adjustable quickly in height or both front and back. The wingnut of 15mm rod clamp allows the adjustment of the rods easily..
Two short rods (2.5inch length) with 15mm riser rod clamp are attached on this easy cheese plate to used for DSLR camera baseplate lifting system. The Easy plate is equipped with various threaded holes(1/4" 3/8" screw threaded) in 9mm spacing..
Made of aluminum alloy, lightweight and durable. Package Includes: 1x 15mm rail riser kit, 1x hex spanner, 1x 1/4 tripod screw, 1x 3/8 tripod screw.

Check Stock

2PCS Bench Dog Clamps for Woodworking Strong Carpentry Desktop Clamp Adjustable desk clamp Fit 19mm Dog Hole Edge Clamps also Suitable for Metal Processing Black

Powerful: The work bench clamp can provide strong pressure by pressing the wrench to ensure that the fixed material will not shake until the end of the work..
Easy to Use: Fix the wood clamps and baffle in place, just press the wrench. Choosing a closer dog hole can make the grip more stable..
19mm Dog Hole: The clamp fits the 19mm dog hole, and the length of the screw rod is 50mm, which is suitable for desktops with a thickness of 15-35mm. If the thickness exceeds 35mm, an additional screw rod is required..
Scope of Use: The dog hole clamp is suitable for woodworking and can be used for heterogeneous materials. Also suitable for clamping in metal grinding..
Features: The clamping surface of the dog hole clamp is made of special rubber, which will neither damage the material nor be too soft..

Check Stock

Marinebaby 5 Rod Holders Angle Adjustable Rod Holders Fishing Console Boat T Top Rod Holder Rocket Launcher Adjustable Fishing Rod Holder for Rails 1' to 1-1/4'

The clamp size is 2 inch, we supply 2 rubber inserts for 1" to 1-1/4" inch size tubing..
Adjustable Fishing Rod Holder for Rails 1" to 1-1/4".
The 5 rod holders will clamp to your T-Top, hardtop, tower, radar arch, rail or any structure made from 2 inch tube pipe (without insert), 1.5inch-1.75inch pipe (with insert)..
ou will have a place for you fishing rods in a safe place off your floor.

Check Stock

ALZO Smoothy Zoom Focus Assist - works like follow focus - adapts to many different camera lens

...can realize the easily switch of focal length between 360° unlimited zoom and A/B focal length..
【MODULAR DESIGN】SmallRig Follow Focus 3010 adopts modular design that allows for assembling and disassembling on the left and upper sides of the camera rapidly and easily. Besides, the included 15mm Rod 1050 and Rod Clamp (with NATO rail) 3011 allows for attaching other SmallRig accessories to improve the compactness of your equipment..
【MODULAR DESIGN】SmallRig Follow Focus 3010 adopts modular design that allows for assembling and disassembling on the left and upper sides of the camera rapidly and easily. Besides, the included 15mm Rod 1050 and Rod Clamp (with NATO rail) 3011 allows for attaching other SmallRig accessories such as NATO Side Handle 2187, Super Clamp Mount 1124 to improve the compactness of your equipment..
【MULTIPLE SHOOTING SCENES】The installation angle of this follow focus can be adjusted, supports handheld, tripod mounted and other shooting scenarios. Furthermore, using the included snap-on gear ring belt and interchangeable M0.8 gears (standard M0.8-43T gear, optional model: M0.8-65T gear 3200, M0.8-38T gear 3285) enables well compatible with different diameters of lenses and achieves diversified shooting..

Check Stock

ddrum Red Shot Tom/Snare Drum Trigger

Bundle includes: Alesis 10” Command Mesh Head Pad, Clamp, L-Rod and Silverline Audio 10ft Trigger Cable.
Dual-zone Mesh head duplicates feel of acoustic drum.
Velocity-sensitive for superior dynamics.
Compatible with: Surge Mesh Kit, Command Mesh Kit, Forge Kit, Strike Kit(s), Crimson Kit(s) and Roland/Yamaha/Simmons racks that have 1 1/2 inch tubes.
*Please note – This bundle is sold as parts, ie- the manufacturer ships it out in clear plastic only, no commercial packaging..
*Not compatible with Alesis Nitro Kit (Nitro Kit uses unusual rack clamps).

Check Stock

Oumefar Welding Electrode Clamp, 400 Amp Twist Type Holder Welding Electrode Rod Holder Welding Electrode Twist Type Full Copper (Black)

...nd quality assurance, compact design, small size, and the handle conforms to ergonomic design, and the work experience is more labor-saving..
FAST AND CONVENIENT ---- Type Holder Welding Tool has excellent workmanship and practicality, 400~500A universal, welding electrode clamp is more convenient to choose welding rod, which will help you to weld materials quickly and conveniently..
USED FOR ---- The welding Twist Type Full Copper holder adopts advanced technology and exquisite craftsmanship, and welding electrode clamp is not hot for long-term welding. Welding electrode clamp is used as a welding electrode holder for various rod electrodes..
WELDING ELECTRODE CLAMP ---- Type Holder Welding Tool have 1 x electrode holder, 1 x hex wrench, 1 x spacer and 1 x spacer post in the package. You can choose from black and yellow to meet your needs..
SERVICE ---- We launch products that meet your needs, and you will get our 100% problem-free guarantee. Customer's smile is our first goal,if you have any question,please feel free to contact us and we offer 24 hours friendly customer serv....

Check Stock

ALZO Horizontal Camera Mount with Rotating Smartphone Mount and Bluetooth Wireless Shutter Release

Solid 33 inches long, 5/8 inch diameter aluminum bar with tripod clamp and rotating smartphone mount for changing camera angles without having to move....
Includes rotating Smart Phone Mount and Wireless Bluetooth Shutter Release.
works with iPhones, Android, Galaxy, LG and many more.
Tripod Clamp attaches to any tripod with 1/4 x 20 camera screw and allows for adjusting rod extension length.
Accommodates smartphones up to 3 inches wide.
Smartphone and tripod are not included in this kit.

Check Stock