ReviewsRolled Roofing Epdm

Oatey 14057 6.75 in. – 13.5 in. Master x 17 in. Base Roof Flashing, 7\ - 13\ pipe diameter, Black

  • Easily customized to accomodate a broad range of pipe diameters.
  • Non-fading EPDM collar provides maximum resistance to weathering caused by ozone and UV rays.
  • Engineered for profiled roofing systems at any pitch.
  • Use silicone sealant between base and surface, and secure with sheet metal screws.
  • Slides over pipe - for pitch to 45 degrees.
Check Stock

Metal Roofing Screw: (250) 12 x 1-1/2' ZINC Hex ReGrip Sheet Metal Roof Screw. Sharp Point Metal to Wood siding Screws. 9/16' EPDM Washer.

  • 5/16" Hex Head - ~9/16" EPDM washer - .216" Shaft (#12) Width .625" - Length 1-1/2" Under Head.
  • ReGrip Screws designed to replace screws or nails that have failed, loose and cannot be tightened.
  • These screws should be used when replacing smaller nails or screws in roofing or siding projects.
  • Galvanized Screws are Grey in color due to the galvanizing process (no paint).
  • Due to error in Manufacturing Process you may receive these with a 1/4" Head and 5/8" EPDM washer..
Check Stock

RecPro Arctic White RV Fiberglass/Filon Siding 10ft

  • Fiberglass is 102" Wide and gauge: 0.045.
  • Has a protective film that must be removed after installation.
  • PLEASE NOTE** All fiberglass/Filon/flooring/Superflex/EPDM/Roofing cuts are obtained from a master roll. This means the ends will have a rough edge....
Check Stock

#14 Metal Roofing Screws(250) Screws x 2" Ivy/Forest Green Hex Head Sheet Metal Roof Screw. Self Starting/Tapping Metal to Wood Sheet Metal siding Screws -EPDM Washer. for Corrugated Roofing

  • Dimensions: Hex Head 5/16" - Shaft .25" - EPDM Washer ~9/16" - Head Height .2" Length 2-1/64" (UH).
  • Screw head is painted with a two part polyurethane for longer product life (Not Zinc).
  • Polymer coated roof screw head painted to closely match various brands of metal roofing - may vary.
  • #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
Check Stock

FT Synthetics Platinum HT Butyl Self Adhering Underlayment Pallet of 36

  • 100% butyl provides bond to plywood or OSB roof decks.
  • Compatible with low slope roofing materials such as EPDM and TPO.
  • Nail sealable (meets and exceeds ASTM D1970).
  • Coverage Per Roll: 200 square feet (2 squares) Roll Width: 36 in. Roll Length: 67 ft. Roll Weight: 40 lbs. Roll Thickness: 41 mils.
Check Stock

Gardner Flat Roof Coat-N-Seal Liquid Rubber Coating (5 Gallon)

  • Single-coat application, less time and labor.
  • For commercial roof applications on EPDM, TPO, PVC, BUR and roll roofing.
  • Rain-safe in 15 minutes, prevents washed away product.
  • Self-leveling sealant designed to stop and prevent future leaks.
  • Provides a reactive surface to improve buildings energy efficiency.
Check Stock

Stick Fast T1176 - Stabilizing Resin and Catalyst, 1 gallon

  • Fiberglass is 102" Wide and gauge: 0.045.
  • Has a protective film that must be removed after installation.
  • **PLEASE NOTE** All fiberglass/Filon/flooring/Superflex/EPDM/Roofing cuts are obtained from a master roll. This means the ends will have a rough edge and will be longer than the purchased cut length. This is done so the customer may cut the piece to exact specifications. Customer will make final cuts..
Check Stock

Teva Women's Omnium Sandal,Slate,8 M US

  • Nickel/coin pattern adds extra grip and makes it non-skid.
  • Great for RVs, trailers, garages, ramp door applications and even on outdoor steps.
  • **PLEASE NOTE** All fiberglass/Filon/flooring/Superflex/EPDM/Roofing cuts are obtained from a master roll. This means the ends will have a rough edge and will be longer than the purchased cut length. This is done so the customer may cut the piece to exact specifications. Customer will make final cuts..
Check Stock

110V 1600W Professional PVC Roofing Welding Tools Heat Gun Kit Plastic Welder Hot Air Weld Gun with Roofing Seam Rollers Seam Tester Probe Weld Nozzle  (Hot gun)

  • Protection class: II (double insulation).
  • Weight: 1.3 kg with power cord per heat gun.
  • [Application]: Repairing tarpaulins and tents Sealing advertising banners.
  • Welding PVC vinyl decking flooring coverings and linoleum.
  • Welding PVC / TPO / EPDM single ply roofing membranes.
  • [Kit includes]: 1pcs x Hot air welding gun (120V / 1600W) .
  • 1pcs x Replacement Heating elements with mica tube.
  • 1pcs x Seam tester probe, plastic handle.
  • 1pcs x 10" (250mm) Heavy duty roofing scissors.
  • 1pcs x 5mm Round weld nozzle 1pcs x 5mm Round speed weld nozzle.
  • [Warranty]: One year warranty, not include the heat element..
Check Stock

Schluter Ditra Membrane Tile underlayment 10 to 323 sq ft Rolls (20)

  • Nickel/coin pattern adds extra grip and makes it non-skid.
  • Great for RVs, trailers, garages, ramp door applications and even on outdoor steps.
  • **PLEASE NOTE** All fiberglass/Filon/flooring/Superflex/EPDM/Roofing cuts are obtained from a master roll. This means the ends will have a rough edge and will be longer than the purchased cut length. This is done so the customer may cut the piece to exact specifications. Customer will make final cuts..
Check Stock

RecPro RecFlex RV Slide Out Rubber Roof Kit | 4.5' Wide | RV Rubber Roof Kit | RV (Camper) Roof Repair (14ft) | Made in USA

  • Lightweight - Single ply roofing is half the weight of EPDM.
Check Stock