ReviewsRolled thread U bolt

Awclub Fully Threaded Rod, M8-1.25 Thread Pitch, 80mm Length 304 Stainless Steel Thread Bar Studs Rods, Right-Hand Threads 10pcs

Material: Made of high quality 304 stainless steel, excellent corrosion resistance and rust resistance.
All thread: Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
Applications: Perfect for anchor bolts, clamps, hangers and U-bolts and many more projects where a metal rod with continuous threading or no head or fashioned tip is required..
What you get - 10Pcs x Stainless Steel Threaded Rod. If you have any question about this product, please feel free to contact us !.

Check Stock

M8-1.25 x 200mm/7.87\ Stainless Steel Fully Threaded Rod Right Hand Threads with Hex Nut Silver Tone (2 Set)

Materia: Stainless Steel, provides great corrosion resistance and antirust ability for a long service life..
Package Contents: 2 x Fully Threaded Rod with Hex Nut.
Applications : Perfect for anchor bolts, clamps, hangers and U-bolts and many more projects where a metal rod with continuous threading or no head or fashioned tip is required..

Check Stock

Leaf Spring Axle Extended U-Bolts (Square Bend) Compatible with Ford 1999-2004 F250 F350 Super Duty Excursion 4WD 4x4-12 inch Length - 3.15 inch Width - F-250 F-350 - Black

...h and width needed, as well as the bend shape..
[SPECIFICATIONS] Includes (4) Square Bend U-Bolts, (8) Nuts, (8) Washers. All parts are Hardware Grade 10.9. Ubolt Length: 12 inches. Ubolt Inside Width: 3.15 inches..
[PRODUCT BENEFITS] For use with 1 to 3 inch lift blocks / plates. These extended U Bolts ensure proper thread engagement when securing your lift pack and leaf springs to your vehicle. Designed to be solid so that it does not bend or warp under stress, and as long as they are properly installed should last the lifetime of your vehicle..
[MATERIAL & MANUFACTURING] The U-Bolts are made from Heat Treated Carbon Steel for optimal durability and fitment. All parts (including the Nuts and Washers) are hardware grade 10.9. Zinc plating / coating prevents surface corrosion and rust..
[INSTALLATION] These square ubolts do not come with instructions but is completely bolt-on. Please consult a professional if you need support. Should take 1-2 hours to install. Make sure nuts are tightened evenly (refer to diagram for sequence) and that they are torqued to correct manufacturer specifications. The use of loctite is recommended to protect the threads from rust / corrosion and prevent loosening from vibrations..

Check Stock

JEGS Round Axle U-Bolt Kit | Grade 5 | 3 Inch Inside Width x 6.75 Inch Inside Height | 3 Inch Thread Length | Includes (4) 1/2-20 Round U-Bolts, 8 Nuts, And 8 Washers

REPLACE DAMAGED, OLD, OR MISSING U-BOLTS with this kit.
GRADE 5 STEEL for strength and long life.
DIMENSIONS: 3“ inside width x 6.75“ inside height, 3” thread length.
INCLUDES four 1/2-20 threaded round u-bolts, 8 nuts, and 8 washers.
OTHER SIZES AVAILABLE to fit your application needs.

Check Stock

(4) Stainless Steel Square U-Bolt 1/2\ D x 3 1/16\ W x 4 5/16\ L Boat Trailer Ubolts with Washers and Nuts,Replacement Parts and Accessories for Automobiles Trailer, Ski Boat, or Sailboat Trailer

U-bolt Size: 1/2" D x 3-1/16" W x 4-5/16 L, thread length: 2-1/2" inches, suitable for 3" x 3" square beams and shafts, (order Please check the measurement size carefully before).
Tips: It is recommended to use lubricant during installation to prevent wear. Use a hand wrench or socket ratchet when installing the nut. Do not use a high-speed power tool or impact tool to tighten the nut..
304 stainless steel material: U-bolts are made of 304 stainless steel, strong and durable, each bolt can withstand 100LBS.
You can get: (4) U-bolts, (8) heavy hex stainless steel nylon lock nuts, (8) flat washers, (8) lock washers. These are only half the price of the hardware store, with these you can spend less time repairing and more time boating.
100 After-sales service: Our U-bolts provide a one-year warranty service. If you have any questions, please feel free to send us an email via Amazon. We will solve it for you within 24 hours. Do not worry..

Check Stock

Wheel Accessories Parts Set of 20 Chrome 12x1.25 Lug Bolt Kit Cone Seat Acorn 17mm Hex 28mm Shank Length M12x1.25 Thread Cone Lug Bolts for Aftermarket Wheels 20 Chrome 12 1.25

Set of 20 Lug Bolts 28mm Long 12x1.25 thread conical seat with 17mm Hex.
Lug Bolts can be commonly Compatible with applications of many European cars where the vehicles have been designed to use Lug Bolts instead of more commonly used Studs and Lug Nuts..
Chrome plated lug bolts have a long lasting, high luster finish. Every lug bolt is double nickel plated to surpass 48 hour salt spray testing..
Our lug bolts are forged, not cut from bar stock. Forging allows for better mechanical properties and consistent quality. Our threads are rolled (forged) onto the bolt, not cut like most of our competitors..
Our Lug Bolts are made of Carbon Steel and Heat Treated to 10.9 grade. Carbon Steel is an alloy known for its very good form-ability, comparatively high strength, and a very good surface finish.

Check Stock

Awclub 2pcs M6 x 250mm Fully Threaded Rod, 304 Stainless Steel Long Threaded Screw,Right Hand Threads for Anchor Bolts,Clamps,Hangers and U-Bolts

MATERIAL: Made of high quality 304 stainless steel, excellent corrosion resistance and rust resistance.
ALL THREAD: Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
APPLICATIONS : Perfect for anchor bolts, clamps, hangers and U-bolts and many more projects where a metal rod with continuous threading or no head or fashioned tip is required..
WHAT YOU GET - 2 Pcs x Stainless Steel Threaded Rod. If you have any question about this product, please feel free to contact us !.

Check Stock

Awclub 2pcs M4 x 250mm Fully Threaded Rod 304 Stainless Steel Long Threaded Screw,Right Hand Threads for Anchor Bolts,Clamps,Hangers and U-Bolts

MATERIAL: Made of high quality 304 stainless steel, excellent corrosion resistance and rust resistance.
ALL THREAD: Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
APPLICATIONS : Perfect for anchor bolts, clamps, hangers and U-bolts and many more projects where a metal rod with continuous threading or no head or fashioned tip is required..
WHAT YOU GET - 2 Pcs x Stainless Steel Threaded Rod. If you have any question about this product, please feel free to contact us !.

Check Stock

CEE 10Pack M8 x 250mm Fully Threaded Rod Stud 304 Stainless Steel 5/16\ x 10\ Long Threaded Screw, Right Hand Threads, M8-1.25 Thread Pitch

Material: 304 stainless steel, provides great corrosion resistance and antirust ability for a long service life..
Package including 10 pcs Threaded Rod, can be drilled, cut, heated and shaped..
Used for assembly fastening, screw into threaded nuts or tapped holes..
Applications : Anchor bolts, clamps, hangers and U-bolts and many more projects.

Check Stock

Wheel Accessories Parts Set of 20 Chrome 14x1.5 Socket Tuner Lug Bolts Cone Seat Acorn 8 Point Tuner 24mm Shank Length Small Diameter Wheel Lug Bolts with Dual Hex Key 20 Chrome M14x1.5

Set of 20 Lug Bolts, 24mm Long 14x1.5 thread conical seat with 8 Point Socket.
Lug Bolts can be commonly Compatible with applications of many European cars where the vehicles have been designed to use Lug Bolts instead of more commonly used Studs and Lug Nuts..
Chrome plated lug bolts have a long lasting, high luster finish. Every lug bolt is double nickel plated to surpass 48 hour salt spray testing..
Our lug bolts are forged, not cut from bar stock. Forging allows for better mechanical properties and consistent quality. Our threads are rolled (forged) onto the bolt, not cut like most of our competitors..
Our Lug Bolts are made of Carbon Steel and Heat Treated to 10.9 grade. Carbon Steel is an alloy known for its very good form-ability, comparatively high strength, and a very good surface finish.

Check Stock

Masmoc 10Pack M8 x 80mm Fully Threaded Rod Stud 304 Stainless Steel Threaded Screw Right Hand Threads M8-1.25 Thread Pitch with 20PCS Hex Nuts and 20pcs Washers

Package :M8 x 80mm right hand full threaded rod 10PCS, M8 hex nuts 20PCS, M8 washer 20PCS..
Thread rod Dia.: M8, Thread Pitch: 1.25mm,total length: 80mm made of 304 stainless steel, provides great corrosion resistance and anti-rust ability for long service life, thread direction: right-hand thread..
These threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
These threaded studs can be drilled, cut, heated and shaped and widely applied in many occasions: anchor bolts, clamps, hangers and U-bolts and many more projects..

Check Stock