ReviewsRoofing Connector

00 PVC RV Rubber Roof | Camper Rubber Roof | Trailer Roof | Motorhome Roof | Camper Roof | RV (Camper) Roof Repair | Trailer Roof Repair (9.5FT Width, 15FT Length)

  • INDUSTRY STANDARD ROOFING - Considered to be the industry standard material for all RV purposes..
  • 100% MAINTENANCE FREE - Rubber is energy efficient and low maintenance, helping you to drive down the cost of running your RV while out on vacation..
  • WEATHER PROOF - Rubber is a naturally weatherproof material, providing excellent protection against the elements, including rain and wind. In particular, rubber is well-known for being watertight as well as an electrical insulator..
  • HIGHEST TENSILE STRENGTH - PVC rubber roofing is the strongest RV membrane for roofing, with the highest tensile strength and the most resistance to tears and punctures. This means you can avoid the maintenance and avoid fixing it up after every bad storm..
  • ELEMENTAL RESISTANT PROPERTIES - This PVC RV roofing has resistant properties, which means keeping maintenance down to a bare minimum..
Check Stock

Stanley TRA704T 1/4-Inch Heavy Duty Staples, Pack of 1000

  • For heavy duty stapling jobs such as insulation, carpet under laying and roofing felt.
  • Color-coded packaging makes size and product selection a cinch.
  • Sturdy plastic packaging reduces staple breakage.
  • Heavy Duty ¿ Narrow Crown ¿ fits TR100, TR200, TRE500 series, PHT150, PHT250 and Arrow T-50.
Check Stock

BHTOP CN45N Roofing Nail Gun, 15 Degree Roofing Nailer, 3/4-Inch to 1-3/4-Inch Coil Nails, Air Nailer Coil 120-pcs Load Capacity

  • Professional Roofing Nail Gun- Professional grade roofing nail gun designed with moving cylinder engine for low recoil. Compatible with 15 degree wire collated roofing nails from 3/4" to 1-3/4".
  • 120 PCs Big loading capacity- Big loading capacity (120PCS) magazine will fasten a full bundle of shingles without reloading. Nails load from the side fast and easy.
  • Special Improvement-Magnetic nail holder aligns the nails when loading and ensures jam-free firing. Tool-less depth of drive adjustment for precision nailing/flush driving.
  • Widely Used -Ideal for a range of materials and applications which will meet all your different need in nailing. Perfect for applications such as roofing, asphalt and cedar shingles, wall sheathing, wood crate assembly, flooring underlayment, siding installation, and fences..
  • Special Humanized Design-Steel contact safety with dual carbide inserts for less wear. Soft grip for comfort and control. Delivers the power to consistently drive nails in the toughest applications..
Check Stock

KwikSafety (Charlotte, NC) SCORPION KIT | 1D Full Body Safety Harness, 6 ft. Lanyard Attached, 3 ft. Cross Arm Strap Anchor ANSI OSHA PPE Fall Protection Arrest Restraint Construction Roofer Bucket

  • ...Arborist, Window Washer, Gutter Cleaning, Roofing, Search and Rescue..
  • SAFETY HARNESS - The KwikSafety SCORPION Full Body 3D Ring Safety Harness supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, ensure that all pass-through connectors are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area..
  • SAFETY LANYARD - The 6’ internal shock-absorbing lanyard makes the SCORPION a more lightweight fall protection device. A dual-action, double-locking snap hook prevents accidental rollout while remaining easy to latch on to your anchor point. Tensile strength (max load) for the snap hook is rated at 5,000 pounds with a gate strength of 3,600 pounds. Meets American National Standards Institute (ANSI) Z359.12 standards..
  • CROSS ARM STRAP (ANCHOR) - 3 foot long pass thru web anchor | Worker capacity is 310 lbs | Min. breaking strength is 5000 lbs | Anchorage equipment for a single user | The GIBBON GRIP cross arm strap is a premium fall protection tool / anchor strap with a large d ring connector | The perfect high rise guardian watc....
Check Stock

(One Piece ) Cable Staple- Staples Cable 9/16 From Stanley Hand Tools (Part Number CT109T)

  • For heavy duty stapling jobs such as insulation, carpet under laying and roofing felt.
  • Color-coded packaging makes size and product selection a cinch.
  • Sturdy plastic packaging reduces staple breakage.
  • Heavy Duty ¿ Narrow Crown ¿ fits TR100, TR200, TRE500 series, PHT150, PHT250 and Arrow T-50.
Check Stock

Dubbs Hardware - 1.5 Inch Copper Nails Roofing Finish - Solid Pure Copper Slate Spikes Flashing Furniture Boat - Package Includes 10 oz of The Highest Quality Nails

  • PURE COPPER NAILS - Pure copper 1.5 inch roofing nails with a 3/8" head.
  • ROOFING NAILS - Great for roofing, boat building, or any other decorative projects.
  • INSTALLATION - To ensure no bending when hammering in, drill a 3/32" pilot hole for best results.
  • PACKAGE INCLUDES - Approximately 100 nails per 10 ounce pack of premium copper nail.
  • USA MADE - Proudly Made in the United States.
Check Stock

1\ Smooth Shank Solid Copper Roofing Nails 10 Gauge USA Made - Qty 100

  • Copper Roofing Nails are used in various roof installations, notably in slate roofs for their ease of removal if the slate needs to be replaced as well as their corrosion resistance and malleability..
  • They are also used for straps, gutters, and leaders as part of rain gutter systems, fascia installations, furniture restoration, and planked wooden boat construction. While designed for roofing, copper nails have other uses as well such as flashing and decorative finishing applications..
  • Copper roofing nails feature wide, flat heads for an increased bearing surface with diamond points and smooth shanks for ease of penetration. They are made entirely of solid copper and their corrosion resistance and malleability make them a good alternative to galvanized nails..
Check Stock

1\ Smooth Shank Solid Copper Roofing Nails 10 Gauge USA Made - Qty 50

  • Copper Roofing Nails are used in various roof installations, notably in slate roofs for their ease of removal if the slate needs to be replaced as well as their corrosion resistance and malleability..
  • They are also used for straps, gutters, and leaders as part of rain gutter systems, fascia installations, furniture restoration, and planked wooden boat construction. While designed for roofing, copper nails have other uses as well such as flashing and decorative finishing applications..
  • Copper roofing nails feature wide, flat heads for an increased bearing surface with diamond points and smooth shanks for ease of penetration. They are made entirely of solid copper and their corrosion resistance and malleability make them a good alternative to galvanized nails..
Check Stock

KwikSafety (Charlotte, NC) Hurricane KIT | 3D Full Body Back Support Safety Harness 6’ Lanyard 3'’ Anchor ANSI OSHA PPE Fall Protection Arrest Restraint Equipment Universal Construction Roofer Bucket

  • SAFETY HARNESS – The KwikSafety HURRICANE Full Body 3D Ring Safety Harness with back support supports users within the capacity range of 130 to 310 pounds (59 to 140 kg) due to the multiple adjustment points located on the harness. To ensure proper fit, ensure that all pass-through connectors are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area..
  • SAFETY LANYARD & TOOL LANYARD – The PYTHON is 6 ft with expandable webbing and a maximum deployment distance of 48 in. User capacity ranges from 130-310 lbs. Two rebar hooks and a snap hook are included to ensure security around construction site scaffolding, I-beams, and concrete structures. Well sewn stitched and spliced connections ensure that the PYTHON meets ANSI, CSA, and OSHA standards. The tool lanyard attachment has 2:1 Safety Factor and can hold tools up to 20 pounds..
  • CROSS ARM STRAP (ANCHOR) – 3 foot long pass thru web anchor | Worker capacity is 310 lbs | Min. breaking strength is 5000 lbs | Anchorage equipment for a single user | The GIBBON GRIP cross arm strap is a premium fall protection tool / anchor strap with a large d ring connector | The perfect high rise guardian watching your....
Check Stock

Metal Roofing Screws: (250) 10 x 2\  Galvanized Hex Head Sheet Metal Roof Screw. Self Starting Metal to Wood siding Screws. EPDM Washer. No Paint

  • Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 2" Under Head.
  • Metal Screws are painted to closely match many brands of metal roofing though color may vary.
  • Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc.
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • #10 Sheet Metal roofing screws are galvanized for corrosion resistance.
Check Stock

Metal Roofing Screws 250 10 x 1 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint

  • Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 1".
  • Metal Screws are painted to closely match many brands of metal roofing though color may vary.
  • Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc).
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • No Paint/Galvanized Zinc screws go well with many types of gray, galvanized and other colors of roofing sheet metal.
Check Stock