ReviewsRotary Table For Milling Machines

NiTi Reamer (Size 45-80# Length 25mm) 6 pieces

  • Material: Made of high-speed steel, with high hardness, sturdiness and durability, compact structure, and prolonged service life..
  • Good cutting ability: It has a sharp tip, strong cutting ability, high precision and long service life..
  • Excellent performance: The milling cutter has a sharp cutting edge, good cutting ability, and high precision, making the work easy and flexible..
  • Applicable to: It is widely applicable to steel, plastic, wood, copper, aluminum and other metal materials..
  • Wide range of uses: Milling reamers are widely used for boring processing, installed in drilling machines and milling machines, and suitable for reaming mold processing and manual processing..
Check Stock

HHIP 3900-2112 58 Piece Clamping Kit (7/16 Inch T-Slot) Stud Size 3/8-16

  • Made of powered casting steel for stronger strength.
Check Stock

SDTC Tech 3.94 Inch Three-Spoke Round Hand Wheel Detachable Hand Crank Revolving Handwheel with Handle for Woodworking, Printing, Machinery etc.

  • The hole size of the round hand wheel conforms to the standard shaft diameter, and it can be disassembled by tapping..
  • Handwheel Total Diameter: 100 mm / 3.94 inch, Center Bore Diameter (approx.): 12 mm / 0.47 inch, Keyslot Width: 4 mm, Handle Height: 50 mm / 1.97 inch..
  • The hand crank wheel is made of high quality phenolic resin and metal material, with strong insulation and durability..
  • Design with rotary handle, handwheel with threaded hole for easy to assemble handle..
  • Widely used in industrial machine tools, such as milling machines, lathes, grinders, etc..
Check Stock

HHIP 3900-1005 5-Piece R8 End Mill Holder Set, 3/16-3/4'

  • 5 PC SET 3/16, 3/8, 1/2, 5/8, 3/4" DRAWBAR END THREAD: 7/16" -20.
  • Hardened and ground For Bridgeport type milling machines.
  • Hardened and ground. For double and single end mills (single end mils only for sizes over 5/8").
  • 5 PC SET For Bridgeport type milling machines. DRAWBAR END THREAD: 7/16" -20.
  • For double and single end mills (single end mils only for sizes over 5/8").
Check Stock

CNC Spoilboard Surfacing Router Bits, SIMILKY 1/2 inch Shank 2 inch Cutting Diameter, Slab Flattening Router Bit Planing Bit Wood Milling Cutter Planer Woodworking Tool

  • ...Avoid cutting black metal and non-wood materials such as steel, iron and sand)..
  • [APPLICABLE EQUIPMENT] Plus a turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Suitable for CNC and other automatic routers as well as hand-held and table-mounted portable routers. wood engraving machines, trimming machines, etc..
  • [APPLICABLE EQUIPMENT] Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machines, trimming machines, etc..
Check Stock

3 Inches 75 mm Rotary Table + 70 mm 4 jaws Independent chuck+ Back Plate Precision Engineering Rotary Table Milling Vice Vise Machine Tools

  • BRAND NEW QUALITY MINI LOW PROFILE 3” INCHES / 80 MM ROTARY TABLE DIAMETER.
  • SUPPLIED WITH A QUALITY 70 MM INDEPENDENT CHUCK , BACK PLATE & T NUTS.
  • PERFECT FOR SMALL LIGHT DUTY MILLING JOBS WHEN YOU HAVE TO CUT THROUGH THE VERTICAL AXIS ON REGULAR INTERVALS.
  • WORM: GEAR RATIO IS 36: 1, WHICH MEANS THAT 1 HANDLE ROTATION SHALL TURN THE HANDLE BY 10 DEGREES. TABLE CALIBRATED 360 DEGREES..
  • CAN BE MOUNTED HORIZONTALLY AND VERTICALLY BOTH. FAST SHIPPING THROUGH TRACKABLE AWB NO. TO USA & WORLDWIDE..
Check Stock

wolfcraft 6901000 1 Parallel milling Guide, Multicolored

  • Parallel milling stop Suitable for items up to 40 mm thick for end mills up to 27 mm wide. For use solely with Master Cut 2000 and Master Cut 1500 items. Wolfcraft stop with precision adjustment..
  • For perfect results, it is possible to adapt to the size of the end mill using an adjustable stop. The parallel milling stop can be mounted safely without any tools using controls. Clever connection for suction of dust. Large items should be supported by a roller stand (e.g. ref. 6102300, weight 2.8 kg, 10-year *).
  • Rotary knobs and adjustable stop for quick, tool-free fastening to the tabletop.
  • Adjustable stop for adapting to milling cutters up to a diameter of 27 mm ..
  • Connection for commercially available vacuum cleaner for dust-free working.
Check Stock

75x25x36 AP30 Stainless Steel Angle Gauge Precision Micro Block Milling Adjustable Angle V Block Milling

  • 【PREMIUM STAINLESS STEEL】Our angle v block milling is made of high-quality stainless steel. This angle gauge has the advantages of surface hardening and durability.
  • 【NICKEL PLATED WORKING FACE】We carry out nickel plating treatment on the working surface of each degree angle plate angle, and the parallelism and perpendicularity of the rust removal of this adjustable angle v block are finely ground to 0.01mm.
  • 【FIXED ANGLE PROCESSING】This precision gauge can use the cursor to indicate the stepless tilt adjustment angle, and then fix it with screws to make various fixed angle processing and inspection workpieces.
  • 【ANGLE V BLOCK】The corner V-shaped block has the characteristics of high precision and easy operation. This micro v block milling can meet your various work needs.
  • 【WIDELY USED】This high precision angle gauge uses adjustable angle grinders and adjustable blades on milling machines, planers, and drilling machines. After the workpiece is processed, this stainless steel block milling crosses or clamps the workpiece with other fixtures, such as processing inclined planes, inclined hole drilling, etc.
Check Stock

Dental Creations Zir-Perfect High Translucent Zirconia Disc - 98mm X 14mm - Offered in 9 Shades (B1)

  • USAGE: Zir-Perfect Zirconia Discs are used to fabricate dental crowns, bridges, inlays and veneers with your CAD / CAM milling machine. Each Zirconia Blank is isostatically pressed for consistent results every time..
  • SPECIFICATIONS: Diameter: 98mm x 14mm Thickness: 10mm Colors: A1, A2, A3, B1, B2, C1, C2, D2, White.
  • COMPATIBILITY: You have many options when it comes to machine compatibility of our Zir-Perfect and milling machines. Our Zir-Perfect Zirconia discs are compatible with Weiland, VHF, Sirona Inlab, Roland and most open CAD / CAM Milling Machines..
  • ADVANTAGES: With a 3 point flexural strength of 1200 Mpa and 43% natural translucency, you won't have to worry about your restoration breaking. Each disc allows for up to 16 units. In the green state, Zir-Perfect disk is softer than the generic zirconia.
  • because of this, your spindle and other tools life span is much longer..
Check Stock

Numerical Control System, CNC Lathe Controller, Low Noise Program Reading for Program Editing(Dual axis)

  • The 6 in 1 set can be composed of 6 different types of machine tools.
  • Machines that can only assemble 1 of the 6 functions at a time.
  • It is a good tool for family and school children to make aeromodels and other woodworking models..
  • Great processing and high quality, easy to assembly and convenient to operate..
  • Except for milling machines (children must use the milling machine under the instruction of parents or teachers), other machine tools have a safe setting that does not hurt their hands.
Check Stock

D26 Milling Machine Ball Handle Three Ball Handles Three Ball Rocking Handle Three Pills Handle Ball Crank 16mm Inner Hole Diameter

  • The milling machine's three-ball crank is made of high-hardness material and is durable enough for most milling machines and work benches..
  • The surface of the three-ball crank of the milling machine has been carefully polished, with high gloss and beautiful appearance, eliminating burrs and safe use..
  • The olive-shaped hand-held part of the three-ball crank of the milling machine is ergonomically designed for comfortable grip and reduced work load..
  • The inner diameter of the three-ball crank of the milling machine is about 16mm in diameter, which is closely connected with other parts of the milling machine and is easy to operate..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
Check Stock