ReviewsRotary Tool Tungsten Carbide Cutter Bit

DrillForce 10pcs 3/16 inch x 6 inch SDS Plus Hammer Drill Bits, Rotary Hammer Drill Bits , Ideal for Drill Holes into Masonry, Concrete, Brick & Cinder Block.

Package and Size:10 piece. Diameter Size 3/16 inch, Total Length 6 inch..
Heavy Duty: SDS Plus Drill Bit for Rotary Hammers has Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into Masonry, Concrete, Brick & Cinder Block..
Easily & Smoothly Drill:3-4X More into Reinforced Concrete, Brick and Masonry by relying on Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched Ease, Long Life & Safe Drilling..
Carbide Tipped: Bits are carbide tipped for long life in tough applications. Centric conical tip guides bit through concrete and provides optimal hole geometry. Wear mark alerts user when bit is no longer precise. Longer life in rebar vs. standard bits..
IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS-Plus bits for reliable anchoring and sturdy holes. Fit certain Bosch, Hilti, Milwaukee, Makita, Dewalt, and Porter Cable drills and other SDS-Plus Rotary Hammers..

Check Stock

Sabre Tools 1/2 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (1/2\ x 16\ x 18\)

✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills.
✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/an....

Check Stock

WHISTECK Carbide Burr Set 8Pcs Double Cut Tungsten Carbide Rotary Burr set 1/4 inch Shank Die Grinder Bits Carbide Rotary File for Metal Wood Carving Engraving Polishing,Drilling

【PREMIUM MATERIAL】: 8pcs carbide rotary burr set, made of heat-treated tungsten carbide steel, good toughness and resistance, sharp and sturdy. Unique tooth angle prevents chipping for the longest lasting design possible.
【DOUBLE-CUT DESIGN】: Double cut die grinder bits for fast material removal and smooth finish. Various shapes and sizes cutting burrs with end cut for interior contour work and face milling. 6mm (about 1/4 inch) shank carbide bit set fits most pneumatic tools and rotary die grinders.
【VERSATILE FEATURE】: High accuracy and high efficiency of our rotary file save your time and meet your different needs. Suitable for metalwork, tool making,wood carving, cutting, welding, chamferring, deburring, casting and sculpting. Easy to grasp and use, safe and reliable.
【WIDELY APPLICATION】: Most popular for body shops, fabrication shops,brake shops, industrial shops, die manufacturers, home repairs ect. Processing good on iron, cast steel, carbon steel, stainless steel, alloy steel, copper, marble, bone, wood and other non-metal..
【EXQUISITE PACKAGE】: Our tungsten carbide burrs are packed in a nice portable case, always keep neat and convenient. High texture box for shipping and protection, an essential kit for friends and relative....

Check Stock

Dremel 9903 Tungsten Carbide Cutter

The product is Tungsten Carbide Cutter, 1 by8" Diameter With 1 by8" Shank.
Rotary tool accessory for shaping, smoothing and material removal.
For use on both hardened steel and stainless steel.
For use on cast iron, nonferrous metals and fired ceramics.
May also be used on plastics, hardwoods and other hard materials.

Check Stock

HIDOTOL Carbide Burr Set 1/4 Shank 10PC Tungsten Double Cut Carbide Rotary Burr Set for Metal and Wood Carving Grinding Polishing Engraving Drilling in Sturdy Round Case.

High Quality Material - HIDOTOL carbide burr set are made of premium heat-treated tungsten carbide material with high strength, hardness and durability, which is guaranteed to withstand the test of time..
Characteristics - 1/4" Shank fit for most rotary tools and grinders. This die grinder bit set is easy to grasp and use, safe and reliable.
double cut tooth angle which prevents chipping.It can be used on all types of metals, including stainless steel and hardened steel, as well as wood, jade and marble..
Specifications - 10pcs tungsten carbide burr set includes SA, SC, SD, SF, SL, SE and SH type burrs, different shapes can meet your need..
Widely Used - Precision metal work, engineering, sculpting, tool making, deburring, jewelry making or welding, or you enjoy various DIY arts and crafts. HIDOTOL carbide bur set are exactly what you need for premium results with rotary burrs..
100% Satisfaction Guarantee - If you are not fully satisfied with our product for any reason, please feel free to contact us, we will try our best to serve you..

Check Stock

1/4 Inch Shank Pattern Flush Trim Router Bit Set, Shank Carbide Pattern Router Bits Set, Template Straight Top Bearing Router Bits with 2 Regular Blades, Prevent Tear-Out, Suitable for Light Work

Carbide Blade Length: 1/4 inch router bits tool shank flush trimming milling cutter bit set, blade diameter 1/2 inch. Blade length 11.9mm, 20mm, 25mm, 38mm..
High Quality: C3 microcrystalline tungsten carbide blade, high-quality alloy steel body. Heat-resistant PTFE coating..
Various Uses: for trimming, slotting, etc. Such as DIY projects, lettering, and other template work suitable for solid wood, particleboard, MDF, plywood, etc. Router bits create a very smooth cut..
Cutting Smoother: 1/4 shank pattern milling cutter bit has 2 cemented carbide blades, high-quality tungsten steel alloy, and high-tech special grinding technology. The Router bits blade has good strength and high hardness, so the template can run on the bearing. This allows you to cut pellets smoothly and prevent tearing..
Perfect After-Sales Service: We will provide you with perfect after-sales service. After you purchase the goods, if you encounter any problems, please contact us in time..

Check Stock

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....

Check Stock

Carbide Tipped Wood Turning Tools Set Latest Lathe Rougher Finisher Swan Neck Hollowing Tools and Interchangeable Aluminum Alloy Grip Handle with Diamond Round Square Carbide Inserts

OUR TURNING SYSTEM INCLUDES - (1) 11'' Tool Handle, (1) 9.8'' Handle Extension, (3) Carbide Cutter Tool Shafts (Circle, Square, Diamond), (1) Swan neck Carbide Cutter Hollowing Tool, (1) T15 Wrench, (1) Allen Wrench, (1) Aluminum Protective Case With Foam Insert..
MATERIAL - Tools are made with tungsten carbide tips for extended cutter life, stainless steel arbor for strength and durability, and aluminum oxide alloy handles for grip, comfort, and durability..
INDEXABLE CUTTER DESIGN – Indexable carbide cutter inserts can be rotated or replaced to provide a fresh cutting edge whenever needed, ( Click the "Aogbra Store" to order replace carbide cutter inserts when you need ).
EASY TO USE – The variable length shaft design and carbide cutters are valuable to all skill levels of woodworkers. Carbide cutters allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools..
TOOL DETAILS – Tool shafts are CNC machined from square high carbon steel, making them strong and solid in the hand. The square shaft profile helps keep the tool flat on the tool rest and level with the floor, making them less likely than round shaft tools to roll and shift while on the tool rest..

Check Stock

5Pcs Premium Tungsten Steel Carbide Rotary Burr Set 1/4inch Shank Double Cut Carbide Burr Set 8MM Head Die Grinder Bits for Die Grinder Drill DIY Wood-Working Carving Metal Polishing Engraving

【5Pcs Solid Carbide Burr Bits】The grinder drill set is made of tungsten carbide, high sharpness and good toughness, machining hardness up to HRC70, great for carving, polishing, drilling.
【Metal Die Grinder Drill Bit】The rotary file is widely used for processing metal(include hardened steel) and non-metal( like wood, bone and marble), perfectly fits for die grinder and drill.
【1/4” Shank Rotary Burr】Size: Shank-1/4inch(6mm), Tip Head-5/16inch(8mm), Total Length 58-65mm, Cutting Burr Shape: Ball, Round Nose, Pointed Tree, Cylinder with End Cut and Cylinder with Round Head.
【Double Cut Head Design】The double burr can cut cleanly and quickly through hardened steel, with smoother surface and no dust pollution compared with grinding wheels or steel cutter.
【Wide Applications】The tungsten grinding bits are widely used in woodworking carving, mold processing, burr cleaning and impeller polishing.
Plus package comes with plastic case for safety storage and protection.

Check Stock

15 Pieces Wood Carving and Engraving Drill Bit Double Cut Carbide Rotary Burr Woodworking Drill Bits Set for DIY Woodworking Drilling Engraving Polishing Supplies

You will receive: the package contains 5 pieces wood carving and engraving drill bits and 10 pieces double cut carbide rotary burr, 15 pieces in....
Size details: wood carving tools have 5 sizes carving, 3 x 3 mm, 3 x 4 mm, 3 x 5 mm, 3 x 6 mm, 3 x 7 mm, 3 x 8 mm in shank and bit diameter.
Durable to use: the wood carving and engraving drill bits are made of high-speed steel, and the double cut carbide rotary burrs are made of tungsten....
Easy to use: the 1/8 inch handle fits most rotating tools, just install it like any other typical drill bit easily, will be your ideal choice for DIY....
Functional tools: our practical tool accessories provide you delicate fine processing, widely applied in metal, woodworking, model engineering,....

Check Stock

HILTEX 10108 Tungsten Carbide Router Bit Set, Woodworking Tools and Accessories, 1/4-Inch Shank, 24-Piece Set, Red, Blue

WOOD ROUTER BITS: The HILTEX Tungsten Carbide Router Bit Set is the perfect addition to your woodworking tools and equipment. Each router bit in this 24-piece set is built with a tungsten material that performs clean cuts on your wood projects..
TUNGSTEN BIT SET: Every router bit is tipped with machined YG8 tungsten carbide blades that can trim, edge, and cut into all types of wood. Each bit in this compact bit set is heat-resistant to help prevent damage to your wood creations..
EASY COMPATIBILITY: Each bit features a universal 1/4-inch shank to allow it to work with any router tool. Select bits also have ball-bearing rollers for better alignment and smoother routing..
VERSATILE & POWERFUL: You can use each compact router bit for wood and carpentry applications like edging, trimming, veining, and grooving. Each piece is made of hardened, solid alloy steel and has a powder-coated finish for maximum durability..
WHAT'S INCLUDED: This set includes 24 tungsten carbide bits and a storage box. The storage box features labeled slots for each bit for easy identification and for storage and transportation from job to job.Please note that packaging may vary between two styles..

Check Stock