ReviewsRotary Tricone Bit

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

162pcs Sanding Drum Kit, Sanding Bands Sleeves for Drum Sander with Drum Mandrels for Rotary Tool

  • ...lish jade and other art materials, or contour irregular shapes into your projects with the ABN 20 Piece Drill Press Sanding Drum Kit.
  • Use these drum sanders for woodworking and metalworking.
  • All pieces are packaged in a plastic blow-molded case for convenient storage, safe travel, and easy organization.
  • PERFECT SIZE ROTARY SANDING DRUMS FOR YOUR NEEDS: This drill press drum sander kit includes 4 reusable barrel sander arbor drum sander bit attachments that can fit your tools.
  • Each sanding bit provides a different diameter to meet your needs: 1/2-inch, 3/4-inch, 1-inch, and 1-1/2 inch (1.27 cm, 1.9 cm, 2.54, and 3.8 cm).
  • FITS YOUR TOOLS: Each drill drum sander attachment bit features a 1-inch (2.54 cm) long steel shank that fits your 1/4-inch (.64 cm) tools.
  • Ideal for use with your rotary tools such as drill presses, spindle sanders, hand drills, or flexible shaft attachments.
  • Easily screw the shank of one of the sanding drill bit attachments into your tool then slip the correct sized sanding band over the mandrel and begin using your tool.
  • REPLACEMENT SANDING SLEEVES: Not only does this drill sander kit include 4 reusable rotary tool sanding drums, but it also includes 4 replacement sandpaper bands for each size mandrel for a total of 16 sanding bands.
Check Stock

2-1/2\ Diamond Dry Core Bit for Brick and Block with SDS Plus Pilot Bit Adapter, 9.5\ Drilling Depth, 5/8\-11 Arbor

  • CORE DRILLING - diamond core bits are designed for soft brick or building block.
  • PILOT BIT ADAPTER - includes SDS Plus pilot bit adapter to fit SDS Plus core drills.
  • USE WET OR DRY - recommended to use with dedicated core drills or core drill rigs.
Check Stock

Chiloskit 10 Pics Diamond Coated 8mm Cylinder Head Mounted Points Grinding Bit Rotary Diamond Burr Set ,3mm 1/8 Shank Suit for Most Rotary Tool Bit Grinder

  • Used for sculpturing, dressing, precision grinding and internal grinding carbide in ceramic, glass, precious stone, alloy and many other abrasive materials..
  • Great for dog nail file grinder bit , crafts, hobbies, home repair tool bit , jewelry tool , lapidary use, modeling, and so much more ..
  • 120 GRIT: #120 Grit Diamond Rotary Grinding set . SMOOTHER EDGES - An essential tool for professional groomers and pet-owners alike to achieve perfectly smooth nails. Small bit is ideal for dogs 30 pounds and under..
  • Highly recommended for carving and polishing stones, metal, jade and ceramic, DIY craft, craft modeling, home repair (wood, some plastic and dogs’ nails) etc..
  • Shank Diameter : 3mm/ 1/8 shank (Compatible with Most Rotary Tool accessories bit )Total Length : 45mm/ 1.8". Material : Metal, Diamond.
  • Package Content : 10 x Diamond Mounted Point.
Check Stock

SPKLINE 5 Pcs SDS-Plus Rotary Hammer Drill Bit Set 3/16',1/4',5/16',3/8',1/2' Diameter,Tungsten Carbide Tip SDS+ Impact Drill Bits for Concrete Brick Block Mortar Stone and Other Masonry

  • Heavy duty rotary hammer drill bit set includes 5 pieces of most popular size drill bits: 3/16″, 1/4″, 5/16″, 3/8″, 1/2″ in diameter, 6″ overall length and 4″ working length of each bit.
  • Strong tungsten carbide centric tip with special design for fast drilling in concrete, mortar, brick, block, stone and other masonry with long life time. It also ensures quick starts and rounder holes.
  • High quality heat forged steel drill bit body with optimized 4-flute design to reduce bit stress when drilling, keep the bit running cooler, and for fast dust removal.
  • Standard SDS-Plus shank is compatible with Bosch, Dewalt, Milwaukee, Hilti, Makita, Hitachi and all other brand SDS-Plus system impact drill and rotary hammers.
  • Drill bits are contained in a transparent plastic storage case for easy access, organizing and portability. These drill bits are widely used in construction industry by professional contractors and home owners with high quality demand.
Check Stock

DrillForce 10pcs 3/16 inch x 6 inch SDS Plus Hammer Drill Bits, Rotary Hammer Drill Bits , Ideal for Drill Holes into Masonry, Concrete, Brick & Cinder Block.

  • Package and Size:10 piece. Diameter Size 3/16 inch, Total Length 6 inch..
  • Heavy Duty: SDS Plus Drill Bit for Rotary Hammers has Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into Masonry, Concrete, Brick & Cinder Block..
  • Easily & Smoothly Drill:3-4X More into Reinforced Concrete, Brick and Masonry by relying on Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched Ease, Long Life & Safe Drilling..
  • Carbide Tipped: Bits are carbide tipped for long life in tough applications. Centric conical tip guides bit through concrete and provides optimal hole geometry. Wear mark alerts user when bit is no longer precise. Longer life in rebar vs. standard bits..
  • IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS-Plus bits for reliable anchoring and sturdy holes. Fit certain Bosch, Hilti, Milwaukee, Makita, Dewalt, and Porter Cable drills and other SDS-Plus Rotary Hammers..
Check Stock

6 Pcs SDS Max Chisel Set Hammer Drill Chisel Set 3/4 inch Masonry Concrete Chisel Drill Bits HOLAN 11-inch Length Rotary Hammer Chisel Bits Including 50mm Wide Chisel 25mm Flat Chisel Point Chisel

  • High Strength Material: Chisel drill bit is made of chromium vanadium steel material, can avoid breakage, and can resist wear, oxidation and corrosion.
  • Slotted Drive System: SDS (or Slotted Drive System) bits for hammer drills/rotary hammers allow the bit to slide in the chuck and enhance the....
  • Sharpened Tops: Specially sharpened top gives continuously effective breaking on various masonry objects, such as brick, concrete, stone, tiles,....
  • Special Face Treatment - The surface of SDS Max drill bit is processed rough, increasing toughness and hardness, and reducing wear to a greater extent.
  • Rotary Hammer Drill Bits: Our SDS Max chisel bit set included 2pcs point chisels, 2pcs 25mm flat chisels, 2pcs 50mm wide chisels.
Check Stock

Pool Fence DIY by Life Saver Self-Closing Gate Kit, Black

  • Easy-to-install, do-it-yourself gate kit for use with the Pool Fence DIY safety system.
  • helps keep kids safe from accidental falls into your pool.
  • 2-foot walk-through opening and recommend height of 4 feet. 4' Tall X 36" Wide.
  • Ultra-reliable magnetic gate latch and self-closing gate hinges. Requires rotary hammer drill with 5/8 x 14-inch masonry bit (minimum.
  • installation requires rotary hammer drill and long shaft masonry bit (not included).
Check Stock

Rotary Hammer Drill Handife 12.5 Amp 1500W Heavy Duty Hammer 1-1/4'' SDS-Plus, 3 Functions 6-Speed Regulation with Vibration Damping Technology, Safety Clutch, Used for Concrete, Metal, and Stone

  • ⚒️【Powful Motor & Adujustable Speed】The heat resistant copper wire motor with 12.5A, 6J impact energy, 4300BPM could provide long working time without burning the machine. 6 adjustable speed (0-900RPM) could meet different work needs, such as concrete, metal, brick, stone and masonry, etc. Handife rotary hammer drill helps you to make an efficient life..
  • ⚒️【Multi-Function & Double Switch Design】Handife rotary hammer drill for concrete has 3 different functions: drilling(suitable for wood, steel , etc.), chiseling(suitable for concrete, marble or brick) , rotary hammer drilling(suitable for heavy duty work). It is easy to switch different function by two different switches, which could extend service life than single switch..
  • ⚒️【Safe and Ergonomic Design】Safety clutch protection designed could provide security if bit jams or high torque force. The integrated anti-vibration system and PU soft grip could decrease the vibration and fatigue. Anti-dust bottom structure and heat dissipation design could extend the rotary hammer’s use life..
  • ⚒️【360° Rotating Handle & SDS-Plus Chuck】Handife hammer drill has a 360° detachable rotating handle for convenient operation.The SDS-Plus chuck can easily and safely replace the drill bit....
Check Stock

Tungsten Carbide Burr Set 1/8 3 mm Shank Die Grinder Bits 20 PC Cutting Burr Bits for Dremel Double Cut Rotary Burr Set for Metall Carving Engraving Drilling Polishing

  • Tungsten carbide - hardness, high strength, and durability. The service life is 8 times longer than that of HSS tool. Pilim double cut carbide rotary burr set can be used on all types of metals, including stainless steel and hardened steel, as well as wood, jade, marble, and bone..
  • Whether you are a master or a beginner, the Pilim rotary files are an indispensable tool for you. Milling out, leveling, deburring, cutting out holes, surface work, door lock installation - Pilim rotary tool bits show good stock removal rate through optimum matching of tungsten carbide, geometry, cut, and available coating..
  • No matter what you do - jewelry making or welding, sculpting or tool making, engineering or high precision metalwork. Maybe you enjoy various DIY arts and crafts. Pilim carbide burr set contains everything you need for this..
  • Pilim carbide bit have shank 1/8" (3 mm) - compatible with Dremel, DeWalt, APEXFORGE, Bosch, Ingersoll-Rand, Makita, Milwaukee, Beyond and other rotary tools with 1/8" collet. This die grinder bit set is easy to grasp and use, safe and reliable..
  • Use of Pilim cutting burrs - makes grinding or carving job easy. Shorten working time, improve the working environment and complete the project faster. Enjoy your creation!.
Check Stock

Bosch RH745 1-3/4-Inch SDS-Max Rotary Hammer

  • SDS-max bit system provides tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate.
  • Combination dual mode selector 2 modes of operation: rotary hammer and hammer only mode.
  • Variable speed dial provides accurate bit starting and controlled chipping applications.
  • Turbo Power feature delivers 10% more power in hammer only mode.
  • Service Minder light indicates when preventative maintenance is required.
Check Stock