ReviewsRoughing End Mills

JAINGU 1pc T Slot Milling Cutter 4-12mm Shank 4 Flute Carbide End Mills for Metalworking T Slot Keyseat Router Bits CNC Milling Cutter-1pc 6x2x3x9.5x50

Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
Used for slotting and peripheral milling.

2 Flute design makes these ideal for plunge cutting when chip removal is not a problem.
General purpose end mill for working on all types of materials.
Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
Uncoated end mills feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling, pocket and slotting.

DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..

Shank Diameter: 5/8''. Overall Length: 8''. Min. Bore: 0.866''..
Boring from light roughing to finishing in small bores. Insert CCMT 32.51 Included & Key Included.
Accepts Inserts CCMT 32.51 and CCMT 32.52. Profiling bar for semi-finishing and finishing operations.
Bar hardness approximately 45HRC. Extreme gloss finish.
Negative 5 degree end & side cutting angle. Positive 80 degree diamond CCMT inserts.

Shank Diameter: 1". Overall Length: 12". Using 80 degree carbide CCMT inserts negative 5 degree end and side cutting angle.
Boring from light roughing to finishing in small bores. Insert CCMT 32.51 or CCMT32.52 Included & Key Included..
Accepts Inserts CCMT 32.51 or CCMT32.52. S16T-SCLCR4. Profiling bar for semi-finishing and finishing operations.
Bar hardness approximately 45HRC. Extreme fine gloss finish.
Negative 5 degree end & side cutting angle. Positive 80 degree diamond CCMT inserts.

Note: stop throwing away the used APKT16504 carbide inserts, uses the two unused corners of the APKT inserts to extends the tools life of the already used APKT 1604 carbide inserts.
Suitable for generic face milling. Surface milling for medium roughing. Recommend for CNC and traditional milling machines..
Uses the two unused comers of APKT 1604 carbide inserts..
Cutter Diameter: 3 inch. Bore Diameter: 1 inch. Number of Inserts: 5. Arbor Hole C: 1".
Extends the life of already used APKT insert by using the two unused edge of the insert which typically used in a 90-degree end mill cutter..

Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

The Carving bits kits of Tapered Ball Nose, Spiral, Cone End Mill Cutter.
For CNC,Engraving machine.Carving Wood, plywood, MDF, plastics, acrylic, stainless steel, titanium alloy etc.
Long service life, Decreasing the times of changing cutters,Saving production time.
Include 3*carbide end mills ( 2 pc v-groove end mill, 1pcs tapered end mill ), 4*Spiral End Mill (3 pc up cut, 1 pc down cut), 1*ball end mill.
The Carbide End Mill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.