ReviewsRound Cap Nuts

RIGID HITCH INCORPORATED Pair of 4-Bolt on 4 Inch Hub Assembly (AKSQ-200044) Includes (2) Square Shaft 1 Inch Straight Spindles & Bearings

Round R30484X 84 Spindle & 5-5" Bolt Circle Trailer Hub.
5 studs 5" Bolt circle using L68149 inner and L44649 outer bearing hub.
Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs.

Check Stock

Zinc Plated Crib Screws and Bolts 105 pcs, Hex Drive Socket Cap Furniture Barrel Screws Bolt Nuts

Zinc Plated Metal finish with round head screws for a wide range of uses. The barrel bolts are trusted in joining Wood, Boards, Kitchen Worktops, Cabinets, Cupboards and a variety of other DIY projects..
Effective and highly recommended. Homvale furniture screws and bolts set are perfect much to give capable purpose. Can be used in aerospace and ready-to-assemble furniture applications..
Made of high-quality material and solid hardware. Firm, sturdy, and rust-free. Can be used even in wet areas. A good match between socket cap screws with barrel nuts to make strong joints for your furniture.
Package Assortment: M6 x 65mm (10 pcs) / M6 x 75mm (10 pcs) / M6 x 35mm (10 pcs) / M6 x 45mm (10 pcs) / M6 x 55mm (10 pcs) / M6 Barrel Nuts (55 pcs). This set is organized by size in a transparent storage case for quick access and protection..
GUARANTEED ENVIRONMENT-FRIENDLY not only it is made from high-quality elements, this kit also promotes environmental protection and is definitely toxic and poison-free..

Check Stock

ECUDIS 4 Cross-Shaped Universal Light Fixture Crossbar Lighting Crossbar with Screws and Nuts

4" Off Swiv Offset light crossbar, 3 13/16" in length with screws and nuts..
Use to mount lighting fixtures to wall or ceiling, match black and silver lamp..
Easy to install the crossbar on the electric box, please follow your local electrical codes and regulations..
Adjustable hardware iron light hardware tools for lighting fixture installation, you can use it for fixtures or canopies to electrical junction boxes.
Package includes: 1 x crossbar, 2 x 1.5" screws, 2 x 1" long screws, and 2 x black acorn cap nuts, 2 x silver acorn cap nuts..

Check Stock

RIGID HITCH INCORPORATED Pair of 4-Bolt On 4 Inch Hub Assembly (AKSQ-220044) Includes (2) Square Shaft 1-1/16 Inch Straight Spindles & Bearings

Round R50642X 42 Spindle & 8-6.5" Bolt Circle Trailer Hub..
8 studs 6.5" Bolt circle using 25580 inner and 14125A outer bearing hub..
Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts..
42 Spindle, Spindle width =2 1/4" Spindle length=6" Overall length =11 1/16" Capacity (pair) 5,000 lbs..

Check Stock

MAKEOMG Folding Adjustable Position Assist Chair Portable Couples Mount Stool Elastic Furniture for Bedroom Bathroom Bear Weight up to 300 pounds

MONEY SAVER - Table Leg Hardware Replacement Kit For Furniture Wood Feets Is Big Money Saver As It Comes With All The Things You Need To Replacement Legs For Couch Or Your Furniture Leg M8 Screw And Cap, 4 Felt Pads, 4 Metal Pads(T Nuts Bracket Plate), 2 Drills Bits(12mm, 3mm).
HARDWARE FOR FURNITURE REPLACEMENT LEGS - This Furniture Leg Mounting Kit Can Attach Legs To Any Sofas, Couches, Seats, Dresser Or Ottomans. The Leg Mounting Kit Comes With Right 2 Size Drill Bits To Replace Your Furniture Legs Easily and Quickly..
2 DRILLS BITS - Furniture Feet Set Comes With 2 Drills Bits (12mm, 3mm) Which Saves Time And Money And Makes Replacement Furniture Legs Easy And Fast. 12mm Drill Helps You To Make Exact Hole For Wood Legs And 3mm Is Perfect For Screws..
ALL ON ONE KIT - 2 Drills Bits (12mm, 3mm), T Nuts Round (Metal Pads) M8 Screw, 3M Felt Pads Makes It Perfect All In One Table Leg Mounting Hardware Kit..

Check Stock

TEKTON 3/4 Inch Drive Deep 6-Point Impact Socket Set, 7-Piece (13/16-1-1/2 in.) | 4890

Includes 6-pc. 3/4 in. drive deep 6-pt. impact sockets: 15/16, 1, 1-1/16, 1-1/8, 1-1/4, 1-1/2 in..
1-pc. 3/4 in. drive deep square impact socket (for inner cap nuts): 13/16 in..
High-torque, 6-point sockets grip flat sides of fasteners, not corners, preventing round-off.
High-contrast permanent laser etched size markings are easy to read, even in low light.
Premium chrome vanadium steel construction with corrosion-resistant black phosphate finish.

Check Stock

Canomo 4 Universal Light Fixture Crossbar 360 Rotation Cross-Shaped Lighting Crossbar with Screws and Nuts 1 Pack

Package includes: 1 x crossbar, two pieces of 1.5" long screws, two pieces of 1" long screws, and two black acorn cap nuts, two silver acorn cap nuts.
Easy to use: install and use this product following your local electrical codes and regulations.
These combo swivel crossbars measure 3 13/16" in length come with scews and nuts.
Crossbars are designed to attach fixtures or canopies to electrical....
Unique advantages: it can rotate 360 degrees in two directions, which is very convenient to use.
Use to mount lighting fixtures to wall or ceiling, match black and silver lamp.

Check Stock

The ROP Shop Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

Replacement Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
Includes - (1) Idler Hub with Lug Nuts, (1) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (2) Inner/Outer Bearings, (1) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (1) 2" Grease/Dust Cap.
Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".

Check Stock

Canomo 4 Light Fixture Mounting Bracket Lighting Crossbar with Screws and Nuts 180 Rotation and Angle Fixed 2 Packs

These combo swivel crossbars measure 3 13/16" in length come with scews and nuts.
Easy to use: light fixture parts are simple to use, only a household Phillips screwdriver and a flat-blade screwdriver are needed..
The ceiling fan mounting bracket are designed to connect the lamp and canopy to the electrical junction boxes, meet your various needs..
Use to mount lighting fixtures to wall or ceiling, match black and silver lamp.
Package includes: 2 x crossbar, 8 pieces of 1.5" long screws, and 4 black acorn cap nuts, 4 silver acorn cap nuts, 3 x wire connectors, 4x flat....

Check Stock

The ROP Shop Pack of 4 Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle

Replacement (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
Includes - (4) Idler Hub with Lug Nuts, (4) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (8) Inner/Outer Bearings, (4) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (4) 2" Grease/Dust Cap.
Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".

Check Stock

The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".

Check Stock