ReviewsRound Die

ChiButtons Kit 44mm (1 3/4

  • Model B400 Button Maker Machine Kit contains all the items you need to make custom buttons. All product measurements are in the Metric System..
  • Acrylic base features a swivel mount which locks the moulds in place, Machine is compact and lightweight for easy storage and transport..
  • Magnetic connectors are compatible with 3 pieces die moulds of these sizes: Round: 25mm (1"), 32mm (1 1/4"), 37mm (1 1/2"), 44mm (1 3/4"), 58mm (2 1/4"), 75mm (3"), 100mm(4). Other shapes moulds: Oval 45x65mm & 65x90mm.
  • Kit includes: Button Maker Machine B400 Model + 44mm round moulds + 200 pin-back button components + adjustable circle cutter, complimentary photo paper..
  • Online instructions for making buttons and die mould installation and online button graphic editor..
Check Stock

GEARWRENCH Angled Tip Pry Bar, 31\ - 82431

  • Product 1: Ratcheting T handles wind Dies with a 5° swing arc and have a reversing lever to eliminate hand over hand turning.
  • Product 1: Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting.
  • Product 1: Die adapters work on round and hex shaped Dies.
  • Product 1: Die adapters work with the 3/8inch Drive pass thru ratchet and socket system as well as socket Accessories.
  • Product 2: Expandable and adjustable to reach areas inaccessible to a fixed head tool for improved access.
  • Product 2: Head rotates 180° through 14 locking positions for unparalleled access and leverage.
  • Product 2: Compact design allows for work in tight spaces.
  • Product 2: Designed for demolition, repositioning equipment, industrial work, aligning steel components, or moving engines.
Check Stock

QWORK NPT Die Set, 6Pcs PVC Thread Maker Tool,Pipe Round Die Set, Pipe Threader Plumbing Tool, Three Maker Size: 1/2

  • Durable: Made of plastic and alloy, sturdy and durable..
  • Thread Mold Size: 1/2 inch, 3/4 inch, 1 inch.
  • Easy to Use: PVC plastic pipe die set, easy to install and use..
  • Package Content: Includes 3 x Thread Mold, 1 x Plastic Pipe Die, and 2 x Round Die..
Check Stock

STOBOK 2pcs Picture Corner Trimmer Punch Corner Rounder Punch Corner Cutter Board Hole Puncher for Handicrafts Black

  • ROUND CORNER PUNCH: This fillet works well and cuts well. The incision is clean and completely rounded..
  • CORNER TRIMMER CUTTER : Easy to Carry: Small size and light weight will not increase your extra space and burden..
  • PHOTO TRIMMING TOOL: The round corner device with the upper die with the lower die cut out of stainless steel, cutting paper will not rough edges..
  • PUNCH CORNER TRIMMER: Humanized Design: Behind the cover, the bottom of the lid can be opened, very convenient to clean wastepaper..
  • HANDICRAFTS TRIMMING TOOL: You can present the paper corner trimming machine to your friends who like DIY making..
Check Stock

Tshya 270Pack 2inch Sanding Discs Pad Variety Kit for Drill Grinder Rotary Tools Die Grinder Accessories with 1/8'&1/4' Shank Backer Plate, Sanding Pads Includes 36-3000 Grit

  • ...ia-Nylon Nonwoven-Strip-Wool die grinder sangding Discs(26Pcs) and Aluminum oxide hook loop discs (240Pcs),sanding with common grits (P36-3000) to meet your various polishing requirements..
  • ✔ TWO TYPES SHANKS - We have found all the connection methods for your project as far as possible. Roll Lock 1/4 inch(6.35mm) Round shank works better with pneumatic tools.
  • 1/4 inch Hex shank more suitable for electric tools..
  • ✔ THREE WAYS CONNECT - The Air-Tool Backer Plate with 1/8"&1/4" Shank can work with any air or electric drill, die grinder, and other rotary tools for the utmost sanding control. You can even put the pad directly on a pneumatic tool without shank..
  • ✔ PERFECT FOR DIE GRINDER - A special soft PU Foam adapter Pad has been developed for this Kit, you can easily install the Hook Loop sandpaper on the Black Disc Pad Holder, so that your can do more with die grinder,Time is Money！.
  • ✔ 270 PACK – 240Pcs 2 inch H&L Sanding Discs (P80/120/180/240/320/400/600/800/1000/1500/2000/3000 each 20Pcs), 15 Pcs Zirconia roll lock discs (P36/60/80 each 5Pcs), 9 Pcs Non-woven discs, 1Pcs Strip disc, 1Pcs Wool disc, 1Pcs Air-Tool Backer Plate with 1/8"&1/4" Shank, 1Pcs Disc Pad with 1/4"Round/Hex Shanks, 1Pcs Soft Foam Layer Buffering Pad, 1Pcs PU Foam adap....
Check Stock

BSP/BSPP British Standard Pipe Tap and Die Set - 18 Piece

  • BSP/BSPP (British Standard Pipe) Tap and Die Set - 18 Piece.
  • 1 taper tap, 1 bottom tap and 1 die in each size below:.
  • Taps are 1/8" - 28, 1/4" - 19, 3/8" -19, 1/2" -14, 5/8" - 14, 3/4" - 14.
  • Dies are 1", 1-1/2" and 2" OD Round Dies..
Check Stock

uxcell 5/8-11 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
Check Stock

uxcell 5/8-24 UNEF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller (....
Check Stock

uxcell 5/8-18 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
Check Stock

uxcell 3/8-16 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
Check Stock

uxcell M6 X 1.0 Metric Round Die, Machine Thread Left Hand Threading Die, Alloy Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
Check Stock