ReviewsRound Die Stock

uxcell Tap and Die and Drill Bit Set M14 x 2 Left Hand Thread Milling Tap and Round Die 12mm Cobalt High Speed Steel Twist Drill Bit

Compatibility: M14 x 2 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
12mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
Tips: Recommended feed rate: general steel: 6-15m/min.
cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..

Check Stock

Blacksmith Forging Tools Knife Making Tongs Set Fire Tongs Anvil Blacksmithing Tongs Forge Tools Includes V-Bit Bolt Tongs, Wolf Jaw Tongs, Flat Tongs, Blade Tongs (Pack of 4)

Bolt Tongs: Designed with deep V Groves in the jaws to ensure your flat stock stays deadlocked while providing heavy hammer blows. Extremely versatile and effective in respect to holding 5/8'' square and round stock..
Blade Tongs: This allows you to clamp the knife in various positions when drawing out the blade. Sturdy, durable, and versatile these tongs will handle a variety of stock sizes from 1/8'' to 3/8 '' thick and up to 1 3/4'' wide..
Flat Tongs: For 1/4 inches Flat Stock. It's superior to pliers or vise grips for holding hot metal (forgings) since Flat tongs have large flat smooth jaw surfaces that do not scratch the workpieces..
Wolf Jaw tongs: Designed for holding a variety of stock sizes including Flat, Square, and Round stock. Perfect for the needs in the shop, at home, or in the field and essential in many situations. One of the tongs commonly used by blacksmiths..
Heavy Type Steel Construction: Sturdy and durable steel craft, finished with non-slip wax to protect from rust and corrosion for long-lasting reliability. Round stock providing the user with a comfortable grip. All tongs measure approximately 15.16 to 16.26 inches making them easy to operate in addition to keeping your hands a safe distance from the forge when removing steel. Spe....

Check Stock

Knife Making Tongs Set Bladesmith Blacksmith Knife Tong Anvil Vise Forge (4 Tongs)

【Professional-Grade Steel Jaws】These tongs are forged with heavy-duty steel and finished with linseed oil to protect from rust and corrosion. They can fully articulate and supply exceptional vise gripping strength on the work-piece during heavy hammer bufftes..
【Flat Tongs】Flat Tongs For 1/4 inch flat stock. The jaws of the pliers have a smooth surface that will not scratch the workpiece..
【V Bit Tongs】Designed to hold 5/8'' square and round stock. Designed with a deep V Grove to ensure that your buttstock remains deadlocked while being able to withstand heavy hammering. Extremely versatile tongs..
【Blade Tongs】For flat stock sizes from 1/8'' to 3/8 '' thick and up to 1 3/4'' wide. Designed to hold the majority of stock sizes according to knife making..
【Wolf Jaw tongs】Designed for holding a variety of stock sizes including Flat, Square and Round stock. Offering a superior grip. It is very suitable for reaching inconvenient areas and is essential in many cases..

Check Stock

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
Tips: Recommended feed rate: general steel: 6-15m/min.
cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..

Check Stock

Bead Roller Round-Over Dies Commplete Set Cr12

1.Material:Cr12, Rockwell Hardness = 40 HRC.
2.Radius Dies Includes 4 piece set: 5/16 inch radius die set 1/2 inch radius die set 1 inch radius die set 1-1/2 inch radius die set.
3.Round-Over Dies can produce smooth, even, large-radius edges in steel and aluminum.
4.The Bead Roller Dies Fits for Most Bead Rollers With 22mm Shafts.
5.For Radius Edges of Sheet Metal,Bead Roller Sheet Metal.

Check Stock

SWAG Off Road Tubing Roller Dies Compatible With Harbor Freight Tube Roller 2.00 Square Dies

We currently have 67 different Die Sets in stock.
Each die set is 100% CNC machined out of 1018 steel for a precise fit.
Due to many operator controlled variables there is no warranty on our dies.
PLEASE SEE RECOMENDED UPGRADES IN THE DESCRIPTION BELOW.

Check Stock

DLOECBT 7inch Round Led Headlight Compatible with Jeep Wrangler JK TJ LJ CJ ,High/Low Beam Amber Turn Signal lights,Halo Ring Angle Eyes ,Pack of 2

【Extremely Bright & DOT E9 MARK】7inch headlights are made with original import LED Chips, 100% brighter than original halogen and HID.The cut off....
【Four Lighting Modes】5500LM @ high beam,[email protected] low beam, Halo White daytime running light (DRL) and Halo amber turn signal light..
【High Quality & Heat Dissipation】 Solid Die-Casting Aluminum Base Housing & clear Lens, maximum protection for headlight from minor abrasions.....
【Easy Installation】It is Plug and Play for most modes with 7” round stock headlights,Coming with H4 to H13 adapter. Making installation is quick....
【Application】Compatible with Jeep Wrangler TJ 2 Door 1997~2006: For Jeep Wrangler LJ unlimited (4 Door) 2004~2006: For Jeep Wrangler JK 2 Door 2....

Check Stock

Drillco 2000R Series 63 Piece High-Speed Steel Tap and Carbon Steel Round Adjustable Die Set, Uncoated (Bright) Finish, UNC and UNF Thread

Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Set includes : 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4″-20, 1/4″-28, 5/16″-18, 5/16″-24, 3/8″-16, 3/8″-24, 7/16″-14, 7/16″-20, 1/2″-13, 1/2″-20, 9/16″-12, 9/16″-18, 5/8″-11, 5/8″-18, 3/4″-10, 3/4″-16, 7/8″-9, 7/8″-14, 1″-8, 1″-12, and 1/8″-27, 1/4″-18.
Comes with 1-inches & 2-inches round die stock, #7 to 1/2-inches & 1/4-inches to 1-inches adjustable tap wrench, #0 to 3/8-inches t-handle tap wrench and 2 screwdrivers.
Comes in an attractive, hand made, wooden case.
High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

Check Stock

SWAG Off Road Tubing Roller Dies Compatible With Harbor Freight Tube Roller 1.50 Square Tube Dies

We currently have 67 different Die Sets in stock.
Each die set is 100% CNC machined out of 1018 steel for a precise fit.
Due to many operator controlled variables there is no warranty on our dies.
PLEASE SEE RECOMENDED UPGRADES IN THE DESCRIPTION BELOW.

Check Stock

TEMO SF-5L6 NF Aluminum Cut Carbide Rotary Burr File 1/2 Inch Head Round Tree 1/4 Inch Diameter 6 Inch Long Shank

These carbide burrs are designed to grind and shape aluminum and other non-ferrous metals. They are used in electric, pneumatic, and hydraulic die grinder. These burrs are essentially electric files which can grind in tight spaces with precision focus. Used by mechanics, machinists, tradesman, and hobbyists..
Aluminum cut burrs are for use on non-ferrous and non-metallic materials. It is designed for rapid stock removal with minimum chip loading..
Made with tungsten carbide and suitable for deburring and polishing..
Extra long 6" shank. Aluminum cut head and meet US standard with 1/4" (6.35mm) shank,1/2" (12.7mm) head diameter, 1" (25.4mm) cut length, and 7" total length. | SF-5L6 Round Nose Tree Head Shape.
Individually packaged with a protective plastic tube..
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..

Check Stock

ele ELEOPTION Electric Cutter for 3.5"x2" Card, Automatic Business Card Cutter Binding Machine-110V

The desktop CR80 all metal manual PVC card die cutter, cutting size is 2-1/8"x3-3/8" (86×54mm) Standard CR80 (ID-1) with rounded corners. Cutter life-span is more than 100,000 times and cutting thickness is less than 0.03inch(0.8mm). It is a great tool for both professional and occasional users..
Long arm handle allow powerful cutting with ease. All heavy-duty metal base, steel blade with excellent edge, long arm of force power-saving Handle..
Blade gap is 0.0003-0.0006inch (0.008-0.015mm), round four corners of the card at one time. Easy and accurate positioning and cut neatly..
The business card cutter is designed with hardened steel cutting die, die-cast steel base and long arm of force power-saving design handle, which can help you cut out more easily than other die cutters..
With this all metal Card Round Corner machine, you can cut the business cards, credit cards, membership cards, driver's license cards, PVC ID cards and wallet size photos..

Check Stock