ReviewsRound Duct Machine

Duct Outlet 16\ x 12\ Duct Reducer, Single Wall Galvanized Metal Fitting HVAC

  • 16" x 12" Duct Reducer, Single Wall Galvanized Metal Fitting HVAC.
  • Crimped on small end to fit inside next ducting section.
Check Stock

Duct Outlet 12\ x 8\ Duct Reducer, Single Wall Galvanized Metal Fitting HVAC

  • 12" x 8" Duct Reducer, Single Wall Galvanized Metal Fitting HVAC.
  • Crimped on small end to fit inside next ducting section.
Check Stock

GrowBright 6-Inch CleanFlow HEPA Filter

  • High-efficiency particulate arrestance (HEPA) filter for 6" round duct/flange air intakes.
  • Blocks 99.97% of particles at .3 micrometers while providing excellent airflow.
  • Features easy-install rubberized collar with steel clamp for a proper seal.
  • Recommended for use with high-velocity inline fans / blowers - may create too much restriction for small duct fan types.
  • Measures (max): 9.25" long x 8.125" diameter, 6" female flange.
Check Stock

Broan PM390 Power Pack Range Hood Insert, Silver

  • 6-Inch round duct connector/back draft damper. Designed to fit flush with the bottom of a cabinet or custom hood installation. Also designed to be used with Broan’s “Box” or “T” design custom liners..
  • Max Sones/100 CFM 1.5. Rated Voltage : 120 V.
  • HVI rated 500 CFM, operates at 9.0 sones.
  • Improves ventilation and lighting over your stove.
  • 390 CFM and 6 sones. The choice of 6 inch round duct (includes damper and adapter) or non-ducted discharge allow you to make the right installation decision for your home.
  • HeatSentry automatically turns blower to high speed when excess cooking heat is detected.
  • Recommended for use with LB30, LB36, LT30, and LT36 liners (purchase separately).
  • Depth 11-1/4″, Height 9-5/8″ and Width 20-1/2″ (inches).
Check Stock

Powerful Industrial Exhaust and Ventilation Fan (14 Inch)

  • HIGH-CAPACITY FAN: Ventilation fan operates on a single, impact-resistant centrifugal blower wheel with 109 CFM, 0.9 Sones, and 120V for a powerful and effective performance.
  • HEAVY-DUTY: Housing is constructed of 20-gauge galvanized steel and features a 6" round metal duct connector to provide long-lasting use.
  • CUSTOMIZATION: Fan ducts horizontally, vertically, or in-line with a separate adapter for your convenience.
  • EFFECTIVE: Motors are permanently lubricated to provide continuous and quiet operation.
  • VERSATILE: Install fan in ceiling or wall -wherever it's needed most!.
  • 109 CFM 0.9 Sones (AMCA), 120V, 1.1 amps.
  • White Polymer Grille with 6-Inch round duct connector.
  • Low profile, white polymer or painted white enamel steel grille.
  • Single, impact-resistant centrifugal blower wheel.
  • 20 gauge galvanized steel housing and can be ducted horizontally or vertically - in-line ducting available with separate adapter.
Check Stock

Broan PM250 Power Module Range Hood, Silver

  • Durable, powder coated silver finish and a fully enclosed bottom ensure this hood is easy to clean and will not discolor.
  • Two-speed motor with rocker controls provides 250 CFM of exhaust at 8.0 Sones.
  • The enclosed lighting area is home to dual incandescent 40-watt candelabra bulbs (purchased separately).
  • One-piece, washable aluminum mesh filter means you can maintain optimum grease capture and keep the kitchen fresh.
  • The choice of 7″ round duct or non-ducted discharge allow you to make the right installation decision for your home.
  • Recommended for use with Models LB30, LB36, LT30 and LT36 Liners.
  • Two-speed motor, 6-5/8-Inch Fan, 250 CFM, 8.0 Sones, 7-Inch round duct or non-ducted discharge, Enclosed light.
  • Accepts two incandescent maximum 40-watt candelabra bulbs-Bulbs not included.
  • One-piece, washable aluminum mesh filter-optional, disposable charcoal filter kit- #B08999040.
  • Durable, powder coated silver finish, Fully enclosed bottom.
Check Stock

Malco FDC2 4-3/8 in. Cut Capacity 12 in. Flex Duct Shear with Built-in Wire Cutter

  • Also cuts the duct liner's wire rib coil.
Check Stock

Speedi-Products FDSC-08 8-Inch Diameter Flex and Sheet Metal Duct Splice Connector Collar

  • For splicing two lengths of flexible or sheet metal round ducts together.
  • Seal joints with approved duct mastic sealants.
  • Insulate Ductwork for improved energy efficiency and comfort.
  • Consult your local building codes for approved installation practices.
Check Stock

Kitchen Ventilation Low

  • DURBALE EXTERNAL BLOWER: External in-line blower for Broan range hoods provides high ventilation and durable construction to meet the needs of your....
  • STRONG OPERATION: Performs at 600 CFM and has a 120 voltage rating for an effective production.
  • EASY INSTALLATION: Unit installs remotely in the interior of the home and can use 8-position mounting brackets or be suspended with special suspension....
  • HIGH QUALITY: Specially designed resilient motor mounts and housing isolation mounts prevent vibration noise to ensure quiet operation.
  • CUSTOMIZABLE DUCT: Flexible duct design allows straight-through or right-angle connections with built-in damper and includes 10" round ductwork....
Check Stock

Mobile Home Parts 1 New Vent Fan Grille Cover for V2262-50

  • Product 1: HIGH-QUALITY HOOD INSERT: Hood insert improves ventilation and lighting over your stove with 4 different ways: ducted vertically or horizontally 3.25" x 10" (operating at 160 CFM and 6.5 Sones), a vertical 7" round duct (operating at 190 CFM), or non-ducted (filter sold separately) for your convenience.
  • Product 1: EFFECTIVE LIGHTING: A protective lamp lens distributes light evenly over the cook-top and accepts up to 75W bulb (bulb not included).
  • Product 1: EASY CARE: One-piece, dishwasher safe aluminum mesh filter means you can maintain optimum grease capture and keep the kitchen fresh.
  • Product 1: VERSATILE: Separate rocker switches control the light and the 2-speed fan for easy use.
  • Product 2: Powered ceiling or bath fan, very efficient for smaller areas.Compatible Ducting Accessories - P7.19 Series Hard Duct or VC0292 Flex Duct.
  • Product 2: 8 inch Diameter rough-in opening required.
  • Product 2: Dynamically balanced polypropylene blade will not bend out of shape.
Check Stock

MARS HYDRO 6 Inch 350CFM Inline Fan with Temperature and Humidity Controller, Carbon Filter, and 33 Feet of Ducting Combo, Ventilation System for Grow Tent, Hydroponics

  • CARBON FILTER FAN COMBO - 6-inch inline duct fan with digital controller, 6-inch carbon filter, 33ft length flex ducting, 3 duct clamps. MARS HYDRO's complete ventilation system provides adequate ventilation and prevents odors in your tent or grow room..
  • TEMPERATURE AND HUMIDITY CONTROL- The digital controller with Intelligent temperature humidity controller programming, fan speed control, timer, and alarm functions. Monitor temperature and humidity in real-time, ensuring optimal growing conditions..
  • POWERFUL INLINE FAN: MARS HYDRO inline duct fan housing is made of durable plastic, and the fan blades have a mixed flow design to provide active air to your growing space, the fan runs at 2800 RPM and provides 350CFM of airflow..
  • FLEX DUCTING AND CLAMPS - Flexible ducting made of high-quality double-layer Aluminum film, prevent the duct from tearing, and prolong the service life. 360-degree arbitrary bending, smooth exhaust, easy to install. Includes 3 duct clamps..
  • SUPERIOR ACTIVATED CARBON - Made of imported 1050+ Virgin Australian activated charcoal, delivering 100% filtered airflow, which provides better absorption and removes odor efficiently. Includes a machine washable pre-filter cloth to prevent carbon residue..
Check Stock