ReviewsRound Exhaust Tips

AUTOSAVER88 1.5-2.5 Inch Exhaust Tip, 1.5"-2.5" Inlet 4" Outlet 9" Long Blue Burnt Stainless Exhaust Tip with Clamps and Adapters Fit for 1.5"/1.75"/2.0"/2.25"/2.5" Outer Diameter Tailpipe, Bolt-On

  • Dimension: Standard 1.5"-2.5" x 4" x 9" (inlet, outlet, and overall length).
  • Fits for cars with 1.5"/1.75"/2.0"/2.25"/2.5" outside diameter exhaust pipes, no matter what its model is (Please make sure the outside diameter of your car tailpipe is between 1.5-inch and 2.5-inch before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel with blue burnt finished, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • Stylish & pleasant-sounding: sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M10 Wrench, no drilling or welding needed.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of ....
Check Stock

SPEEDWOW 2.5 Inch 2 1/2 Butt Joint Exhaust Clamp Band Coupler Sleeve Stainless Steel 2 PCS

  • Exhaust clamp is used for 2.5 Inch OD to 2.5"OD exhaust pipe/muffler/catalytic converters connection,ect. Joint your exhaust tubing together quickly....
  • No welding design makes exhaust clamp fast, easy and accurate installation. Arc curved face,capability prevent exhaust gas and noise leaks. Exhaust....
  • The reaction block provides a full 360 °equal distribution of stretching forces, prohipiting pipe distortion while complesing a seal round the joined....
  • Application:Butt joint Exhaust Clamp suitable for exhaust system, muffler, stainless steel material, not easy to rust, corrosion resistance..
  • WARRANTY - SPEEDWOW provide 2 1/2 inch Exhaust Band Clamp with 5-month warranty.Any product problem, please feel free to contact us..
Check Stock

IFOKA Exhaust Tip 2.5 Inch Inlet 2.5 Inlet 2.5 Outlet 9 Long Black Exhaust Tips Turn Down Diesel Stainless Steel Powder Coated Finish Tailpipe Extension Bolt On Design Pipe Down

  • Dimension: Black exhaust tips 2.5" inlet, 2.5 inches outlet, 9 inches overall length. Universally compatible with vehicles which have exhaust pipes....
  • Material: Stainless steel with black powder-coated surface treatment, prevent corrosion, high-temperature resistance, and not easy to scratch & fall....
  • Easy to install: Before the installation, cleaning the tailpipe and exhaust tips are necessary. The bolt on design make it easy to install, and not....
  • Unique Driving Experience: Angle cut and turn down design, more thicker inner waller design makes the vehicle sounds rumble and crackle, give you the....
  • Rustproof Design: Angle cut on the bottom of the exhaust tip, not easy to accumulate water and avoid rust effectively. In order to prolong the service....
Check Stock

Exhaust Tip 3 inch Inlet, MONOKING 3 inch Exhaust Tip Stainless Steel Black Tailpipe for Truck Cars 3' Inlet 4' Outlet 12' Long Bolt On

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • BOLT ON INSTALL – Holds up long time! Direct Bolt-on, it takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and tighten screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and arrive within 2-3 days.
Check Stock

2 Pcs Stainless Polished Muffler Exhaust Tip Finisher Compatible with 2016-2020 Honda Civic

  • Fits 2012-2020 Honda Civic With OEM Exhaust System (Will Not Fit Hatchback Sport or Si or Type-R).
  • Package includes: 2 x Exhaust Pipe Tip Finishers as Shown (Quantity 1 means 2 Exhaust Tips).
  • Made Of Stainless Steel Material in Nice Polished Chrome Finish.
  • Easy Installation- Direct Bolt-On To OEM Exhaust With Adjustable Screws.
  • Dramatically Enhance The Rear Appearance of your Car. Gives it a Sport Tone Right Away..
Check Stock

3 inch Exhaust Tip, MONOKING Black Exhaust Tip 3 inch Inlet Stainless Steel Clamp On Tailpipes for Truck Car 3″ Inlet 4″ Outlet 12″ Long

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • CLAMP ON INSTALL – Holds up long time! Well thought out clamping mounting. It takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and clamps down tightly by tightening screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and....
Check Stock

Stainless Steel Round Exhaust Tip Universal Adjustable Removable Exhaust Muffler Tip Sound Silencer [4 Inch]

  • Material: The round exhaust tip is made of high grade stainless steel, high temperature and rust resistant, durable in use..
  • Excellent Quality: Crafted by professional manufacturer, strict factory QC test, trustworthy quality guarantee..
  • Function: Has ability for sound level adjustment from opening or closing the silencer.Effectively reduces DB sound levels from louder aftermarket exhaust systems..
  • Attractive Appearance: Bright as a mirror,makes the exhaust tip looks shiny,highlighting the noble quality,an add-on decoration to makes your car to be eye-catching..
  • Size: 3.5in / 4in / 4.5in (optional),please measure the tail pipe diameter on your car before ordering..
Check Stock

Caltric Exhaust Pipe Gasket Compatible With Suzuki Dr-Z400 Dr-Z400E Dr-Z400S Dr-Z400Sm 2000-2017

  • This angle is not always present on the competitions exhaust tips as it is more time consuming to manufacture..
  • This Billet exhaust tip fits on the end of your OEM Yamaha exhaust system increasing your rides overall performance and sound..
  • This angled outlet directs the exhaust fumes down and away from fenders and tailgates..
  • This power tip can be used either with or without the stock exhaust screen..
Check Stock

Remflex 2004 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, ('55 - '00), Round Port, Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1426.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Check Stock

2 Pieces Titanium Black Chrome Muffler Exhaust Tip Finisher Compatible with 2016-2021 Honda Civic

  • Fits 2012-2020 Honda Civic With OEM Exhaust System. Will Not Fit Hatchback Sport or Si Model. Exhaust May Need to be Adjusted For Installation..
  • Package Includes 2 x Exhaust Pipe Tip Cover as Shown. Quantity 1 Means 1 Pair of Tips.
  • Made Of Stainless Steel Material In Titanium Gunmetal Finish.
  • Easy Installation- Direct Bolt-On To OEM Exhaust With Adjustable Screws. Simply Slide in and Tighten up the Screw..
  • Dramatically Enhance The Rear Appearance of your Car. Gives it a Sport Tone Right Away..
Check Stock

3 Inch 2 x Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Universal butt joint band 3.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes..
  • Universal butt joint exhaust clamp fit for 3.0" OD pipe to 3.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Stainless steel clamp with great performance in anti-corrosion Stainless steel clamp with great performance in anti-corrosion.
Check Stock