ReviewsRound Shank Taps

MaxTool 5/8-11 Spiral Flute Taps HSS M2 Thread Taps 11 TPI FULLY GROUND RIGHT HAND; SFF02W02R40

  • The premium high speed steel M2 material provides long tool life.
  • Suit for threading blind holes in steel and Non-Ferrous material.
  • The round shank with square driver makes the taps suitable for hand or power-driven applications.
  • The uncoated surface finish can be used on a broad range of materials.
Check Stock

MaxTool 1/2-13 Spiral Flute Taps HSS M2 Thread Taps 13 TPI FULLY GROUND RIGHT HAND; SFF02W02R32

  • The premium high speed steel M2 material provides long tool life.
  • Suit for threading blind holes in steel and Non-Ferrous material.
  • The round shank with square driver makes the taps suitable for hand or power-driven applications.
  • The uncoated surface finish can be used on a broad range of materials.
Check Stock

ATOPLEE 1pc Metric HSS 6542 Left Hand Thread Tap (M16x2.0)

  • {High Quality Material} The tap is made of HSS6542 material, which is stronger and more durable than ordinary taps..
  • {Size}Total Length:101mm,Shank Diameter:12mm,Pitch:2mm..
  • {Note}This is a small straight groove tap, which can be used for tapping of round through holes or shallow blind holes. Pay special attention to not being used for blind hole tapping..
  • {Widely Usage}Tapping can be done on stainless steel, iron, aluminum, copper, general steel and other materials. It can be used with manual equipment or special processing consoles, such as tapping machine, driller's integrated bench drill, CNC numerical control lathe, machining center, etc..
  • {Package Included} 1x Left hand Thread Tap.
Check Stock

Walton 10063 #6, 3 Flute Tap Extractor With Square Shank

  • For removing Machine Screws and Broken Hand Taps.
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
  • Threads per inch need not be specified as Tap Extractors will fit both NC and NF taps.
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • When fingers become bent or broken or are too short for further use, replacement fingers are available.
Check Stock

Walton 10124 #12, 4 Flute Tap Extractor With Square Shank

  • For helical coil wire screw thread insert taps.
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
  • Threads per inch need not be specified as Tap Extractors will fit both NC and NF taps.
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • When fingers become bent or broken or are too short for further use, replacement fingers are available.
Check Stock

Piutouyar M3-M12 Adjustable Tap Wrench Handle 1/16'-1/2' Tap Handle Reamer Wrench Profesional Tapping Wrench Tool

  • Adjustable tap wrench holds shank sizes 1/4" - 1".
  • For use with 1/4"-1-1/8" hand taps (1/4" - 1" shanks).
  • For use with 1/8"-3/4" pipe taps (1/4" - 1" shanks).
  • 9/32"-29/32" hand reamers (1/4" - 1" shanks).
Check Stock

Driak 6pcs HSS Screw Countersink Drilling Bits M3-M10 Combination 1/4\ Hex Twist Tap Drill Dit Set

  • 6PCS Hex Shank High Speed Steel Spiral Screw Thread Taps Drill Bits Set.
  • Suitable for soft tapping metal, aluminum, iron.
  • Complete hole drilling, tapping, deburring and countersinking in one operation with power.
  • Made from hardened high-speed steel vs carbon steel for longer life.
Check Stock

QISF Adjustable Silver T-Handle Ratchet Tap Holder Wrench with 5pcs M3-M8 3mm-8mm Machine Screw Thread Metric Plug T-shaped Tap

  • Chromium-plated finish for the highest durability.
  • Size of screw thread taps : M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25.
  • Easily switched from left to right handed operation, or locked for non-ratcheting use.
  • T-Handle Ratcheting Tap Wrenches Three position gear box for quick, efficient ratcheting action Designed for use with taps and can also use on the left hand tap , reamers, screw extractors and other tools with a square shank.
  • Package included: 1-Piece Adjustable T-Handle Ratchet Tap Holder Wrench + 5Pcs Taps(1Pcs M3.
Check Stock

Kaufhof ATW-0053 Adjustable T-Handle Tap Wrench Set – 3 Piece M1-M4 / M4-M8 / M6-M12

  • Adjustable tap wrench holds shank sizes 1/4" - 1".
  • For use with 1/4"-1-1/8" hand taps (1/4" - 1" shanks).
  • For use with 1/8"-3/4" pipe taps (1/4" - 1" shanks).
  • 9/32"-29/32" hand reamers (1/4" - 1" shanks).
Check Stock

Walton 18013 13 Piece Multi Flute Tap Extractor Set With Square Shank

  • For removing Machine Screws and Broken Hand Taps.
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
  • Threads per inch need not be specified as Tap Extractors will fit both NC and NF taps.
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • When fingers become bent or broken or are too short for further use, replacement fingers are available.
Check Stock

OBPSFY 5PCS BSP Pipe Tap Set,Bearing Steel Threading Taps Tool for clean/re-thread damaged/Jam Pipe threads（1/8\

  • * Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.5 Different Sizes ，great for tapping various threads, meet your different needs..
  • * BSP Pipe taps are used to cut new threads or repair damaged threads / jam pipe threads and have excellent results,it is the best choice for your toolbox..
  • * In accordance with National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8.
Check Stock