ReviewsRound Shank Tools

Drill America 2\ NPT High Speed Steel 7 Flute Pipe Tap, T/A Series

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.
Check Stock

Bridge (Construction) Reamer 1-3/16\ Extra Long Magnetic

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Combination black and gold finish, for improved lubricity, corrosion resistance, and to reduce chipping or flaking.
  • These round shank tools have flats ground onto three sides to reduce slippage of the bit when used in drill chucks.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Construction reamer is especially adapted for heavy duty reaming as encountered in the fabrication of structural steel assemblies.
Check Stock

Drill America 1/8'-27 NPT Pipe Tap, Carbon Steel, DWTPT Series

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.
Check Stock

Drill America - DWT64012 1-1/2\-11-1/2\ NPT High Speed Steel 7 Flute Pipe Tap, DWT Series

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.
Check Stock

Drill America - T/A57129 1/4\-20 High Speed Steel 2 Flute Spiral Point Tap, T/A Series

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
Check Stock

Freeman FR.131-3B 21 Degree .131 x 3 Plastic Collated Brite Finish Smooth Shank Full Round Head Framing Nails 2000 count

  • Nailed It: These .131" plastic collated smooth shank framing nails are 3" long and designed for use in the 21 degree full round head framing nailer models PFR2190 and SFR2190. Each box includes 2000 nails to ensure you have plenty of fasteners on hand..
  • Pro Design: These 3" framing nails are plastic collated for smooth driving from a pneumatic nailer and they feature a smooth shank, suitable for many framing and general construction applications. They offer appropriate holding power for most everyday uses..
  • The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between..
  • Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA..
  • Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode....
Check Stock

Drill America - DWRRTPS6 #6 High Speed Steel Spiral Flute Taper Pin Reamer, DWR Series

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Available in round shank with square end.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • 0.2773-inches short end and 0.354-inches large end.
Check Stock

35 Pack 1/4 Abrasive Flap Wheel Sander Set WENORA 80 Grit Aluminum Oxide Flap Wheels Cylindrical Shape Sanding Wheel 7 Sizes

  • 【PREMIUM MATERIAL】 High quality aluminum oxide coated abrasive cloth provides a solid and durable grinding power combined with high efficiency and long life to give you that premium performance that you need and expect from your tools..
  • 【SHANK DESIGN UPGRADE 】 we upgraded the ordinary round shank to 1/4-Inch hex shank to improve the firmness at high speeds. Even in large-area heavy-duty machining, there will be no loosening or slipping..
  • 【METALWORKING APPLICATIONS】 The mounted flap sanding wheels are commonly used in metalworking as a grinding or deburring wheel to clean up welds and cuts in iron, stainless steel and metal alloys. Also used for removing layers of rust and paint on flat metal surfaces.
  • 【WOODWORKING APPLICATIONS】These abrasive wheels suitable to be used as sanding wheels for electric drills, cordless drills, die grinders and.for the stripping of old layers of paint when during resurfacing projects or sanding and finishing contoured wood surfaces..
  • 【VARIETY OF WHEEL SIZES】Our 35 piece set includes (5) 1” thick sanding wheels with 1/4” hex shank in each of the 7 different sizes.
  • 0.78", 1", 1.2", 1.58", 2", 2.36" and 3.14" widths.
Check Stock

The Lathe Of Heaven

  • The VINWOX Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The VINWOX Carbide Lathe Tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head. Start your easy wood turning on your Wood Lathe with VINWOX Carbide Turning tools now.
  • Including One set Replaceable Carbide Tip Insert installed on chisel. Rougher: 11.1x11.1x1.75mm 4 sided Square Shape Carbide Tip. Finisher: 12mm Diameter Round Shape Carbide Tip. Detailer: 28x10mm Diamond shape Carbide Tip. Peach Square Radius: 11.3x11.3x1.75mm with 4 sided 2" Arc Square Radius Carbide Tip. Blade images on product picture are only for Clear Vision..
  • 1/2/3/4 Indexed Carbide tip design always offer sharpest edge for turning and maximum cutting life.
  • Top quality and Long cutting life Guaranteed.
Check Stock

Drill America - POUCSNPT5 5 Piece NPT Pipe Tap Set (1/8\

  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.
Check Stock

Drill America DWTPT1-1/2 1-1/2\-11-1/2 NPT Pipe Tap, Carbon Steel, DWTPT Series

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.
Check Stock