ReviewsRouting Spindle

BORA 3.25HP Soft Start Router Motor with Variable Speed PM-6200

  • Complete Control: This powerful soft start 3.25 horsepower motor with easy to adjust variable speed dial ensures you have complete control while working.
  • Powerful performance: Electronic speed control of the motor provides the power to maintain constant speed under load and ensure perfect results when routing all types of wood.
  • Smooth routing: 15 AMP motor offers 10,000 to 22,000 RPM for smooth routing every time.
  • Industrial Grade: Included with the motor are two precision ER20 collets (1/4" and 1/2") for secure, accurate routing. These collets have holding power and rigidity for faster cuts, longer tool life, and better surface finish..
  • A great addition to the workshop: With a 4.2-inch diameter, this motor is easy to use and compatible with most router lifts and tables.
Check Stock

SOUTHWEST WHEEL 2-Pack 2,000 lbs Trailer Axle Spindle with 4-4 Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

SOUTHWEST WHEEL 2-Pack 2,000 lbs Trailer Axle Spindle with 5-4.5 Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

Gregory NANO 18

  • Independent zippered pocket for hydration reservoir with routing to harness, or space for your tablet.
  • Padded airmesh shoulder harnesses with one-handed sternum strap buckle and hydration routing loops.
  • Breathable die-cut backpanel and tuck-away webbing hipbelt.
  • Large, zippered accessed main compartment and dual compression straps with quick release buckles.
Check Stock

Grizzly Industrial G0709-14 x 40 Gunsmithing Gearhead Lathe

  • 2 MT#3 dead centers (1 carbide tipped) 1 MT#3 live center 1 MT#5 - MT#3 sleeve 1/2" drill chuck w/ MT#3 arbor.
  • Dimensions 51-3/4"H, 71-3/4"L, 30"W Approximate shipping weight 1550lbs 11" face plate.
  • Motor 2 HP, 110/220V, single-phase, 20/10 Amps, 60Hz, 1725RPM Number of speeds 8 Range of speeds 70-2000RPM.
  • Spindle bore 1-9/16" Spindle nose taper MT#5 Spindle nose D1-5 Camlock D1-5 spindle nose (6 pin) 1-9/16" spindle bore.
  • Swing over bed 14" Swing over gap 19-3/4" Swing over cross slide 8-3/4".
Check Stock

PORTER-CABLE Router Template Guide, 9-Piece (42000)

  • Offers a number of template guides to support a wide variety of routing applications.
  • Includes guides 42024, 42033, 42036 and 42045 for general routing applications.
  • Guides 42027 and 42057 complement dovetailing applications.
  • 2 Lock Nuts 42237 are included for securing the guides to the router sub-base.
  • All template guides fit standard 1-3/16-inch diameter center hole router sub-bases.
Check Stock

SOUTHWEST WHEEL 5-Hole, 4.5\ Bolt Circle Idler Hub for 2,000 lb. Axles (BT8 Spindle) 1\ Spindle

  • Round R30484X 84 Spindle & 6-5.5" Bolt Circle Trailer Hub..
  • 6 studs 5.5" Bolt circle using L68149 inner and L44649 outer bearing hub..
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts..
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs..
Check Stock

Rigid Hitch Trailer Hub Kit - for 1-3/8\ Inner / 1-1/16\ Outer Tapered Spindle - 5 Bolt on 4-1/2\ Bolt Circle

  • Round R30484X 84 Spindle & 5-4.5" Bolt Circle Trailer Hub.
  • 5 studs 4.5" Bolt circle using L68149 inner and L44649 outer bearing hub.
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs.
Check Stock

Dremel 652 Straight Routing Bit, 3/16-Inch, Gray

  • For routing, inlaying, mortising in woods and other soft materials.
  • For best results insert bit in tool and back out slightly before tightening down to provide plenty of shank for the collect or chuck to hold the bit.
  • Secure objects to a stable surface while working.
  • Routing bit, 3/16-inch straight, high speed steel, great for routing, inlaying and mortising in wood and other soft materials.
Check Stock

RIGID HITCH INCORPORATED Pair of 4-Bolt on 4 Inch Hub Assembly (AKSQ-200044) Includes (2) Square Shaft 1 Inch Straight Spindles & Bearings

  • Round R30484X 84 Spindle & 5-5" Bolt Circle Trailer Hub.
  • 5 studs 5" Bolt circle using L68149 inner and L44649 outer bearing hub.
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs.
Check Stock

RIGID HITCH INCORPORATED Pair of 4-Bolt On 4 Inch Hub Assembly (AKSQ-220044) Includes (2) Square Shaft 1-1/16 Inch Straight Spindles & Bearings

  • Round R50642X 42 Spindle & 8-6.5" Bolt Circle Trailer Hub..
  • 8 studs 6.5" Bolt circle using 25580 inner and 14125A outer bearing hub..
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts..
  • 42 Spindle, Spindle width =2 1/4" Spindle length=6" Overall length =11 1/16" Capacity (pair) 5,000 lbs..
Check Stock