ReviewsRow Socket

Aexit 14pcs Solder IC Sockets & Plugs Type 28-PIN DIP Integrated Circuit IC DIP Sockets Sockets Adaptor

  • Each Size(Approx) : 37 x 10 x 8mm / 1.46" x 0.4" x 0.31"(L*W*H).
Check Stock

ZYAMY 10pcs 2.54mm 40Pin Round Female Socket Pin Header Strip 1x40P Single Row Straight Female/Male Socket/Pin Header Strip Connector Black

  • Type: 2.54mm 40 Pins Single Row Straight Round Female Socket Pin Header Strip.
  • Use: Be widely used in Arduino Electronic DIY, such as: electronic circuit, electrical appliances, instrumentation ,PCB circuit board etc. electronic project..
  • Package: 10pcs 40 Pin Black Round Female Socket Pin Header.
Check Stock

Aexit 10pcs 2.54mm IC Sockets & Plugs Pitch Dual Row 8P DIP IC Sockets Adaptors for IC Plugs PCB Board

  • Each Size(Approx) : 10 x 10 x 8.5mm / 0.4" x 0.4" x 0.33"(L*W*H).
Check Stock

uxcell 30 Pcs 16 Pin 2.54mm DIP IC Socket Solder Type Adaptors

  • Row to Row Distance(Approx): 7.5mm / 0.295".
  • Each Size(Approx): 20.3 x 10 x 8mm / 0.80" x 0.39" x 0.31" (L*W*H).
  • Package Content: 30 Pcs of DIP IC Sockets.
Check Stock

ARCELI Prototype Screw/Terminal Block Shield Board Kit for Arduino MEGA 2560 R3 DIY Soldered

  • PCB: FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm. Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm..
  • Terminal Block: Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs ). Wire range 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass..
  • Female Header Socket: Pitch 0.1"/2.54mm, pin length 15mm / 0.59" Single row 10pin x1pcs, singal row 8pin x 5pcs, dual row 18pin x1pcs..
  • Note: This is not original Arduino product.it only a substitute accessories from ARCELI.
Check Stock

E-Simpo 10pcs 2.54mm (0.1") Hole Round Female Header Socket Gold Single Row Arduino PCB Female IC Crystal Socke High Quality (1x40P Hole Female Header)

  • 10pcs Single Row 40 Pin 0.1"(2.54mm) Header Socket Connector.
  • Single Row 40Pin Round Female Pin Header.
  • High Quality, Gold-Plated Contact,better electrical conductivity and low contact resistance. Generally used in circuit boards and other low-voltage circuits..
Check Stock

GeeekPi Raspberry Pi 4B Case, Raspberry Pi Armor Case,Raspberry Pi Aluminum case with Passive Cooling/Shell Heat Dissipation Heatsink Thermal Tape for Raspberry Pi 4B/3B+/3B

  • It has passive heat dissipation due to without fan..
  • With 3pcs little thermal tape for better heat dissipation of Raspberry Pi Board.
  • Female socket, double row, straight pin, 2x20 pins, Through Hole mounting.Pitch: 2.54mm/0.1".
  • Package Includes: 1 x Armor Case,3 x Thermal tape,1 x Allen wrench,4 x M2.5 Hexagon socket head screws,2x20Pin Female Header(Note:Raspberry Pi and Fan Not Included).
Check Stock

USB Female Type-B Port 4-Pin Right Angle PCB DIP Jack Socket-White 10 Pack by MUZHI

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

uxcell 17pcs DIP IC Chip Socket Adaptor Round 28 Pin 2.54mm Pitch Dual Row 15.24mm Row Pitch

  • Row to Row Distance(Approx):15.24mm/ 0.6".
  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

uxcell 20pcs DIP IC Chip Socket Adaptor Solder Type 2.54mm Pitch Dual Row 8 Flat Pin 7.6mm Row Pitch

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

XIYUESHAN Mouse Button Board Panel Gaming Mouse Upper Motherboard for Logitech G700/G700S Mice Replacement Parts

  • Original disassembly, tested before shipment.
  • The reverse side of the button board is installed with a row socket and changed to a plug-in style, and it can be connected with the bottom board..
Check Stock