ReviewsRtd Sensor

ThermoProbe Model TL-3W, 0.01 Res, 8 in Stem, Supplied with NIST traceable, ISO/IEC 17025 Accredited Report of Calibration at 0, 50, 100, 150°C

Includes temperature alarm and Water Tight PT-100 RTD Sensor with 1/2" MPT Threads - includes 1/2" FPT SS lock nut and silicone washers All Metal (aluminum) housing.
Includes 12' 10 Gauge SJOOW Power Cord, 4 prong dryer plug and 3 Prong twist-lock outlet.
Dryer plug can be converted to 3 prong, conversion instructions included.
Controls up to a 5500 Watt element and Compatible with GFCI breakers.
240 VAC Mash Tun or RIMS (Recirculation Infusion Mash System) Tube Controller.

Automated RTD and Thermocouple Calibrator. Comes with rubber boot, hands free carrying case, test leads and NIST cert..
Easy to use With the PIE 525B you can check and calibrate all your thermocouple and RTD instruments and measure temperature sensors..
Take it into the shop, plant or field Carry it without worry - it comes protected with a rubber boot and rugged, low profile switches. Easy to operate even in the dark areas of the plant with the backlit display..
Calibrate thermocouple instruments to 0.1 & 0.01 degrees-F & degrees-C The PIE 525B works with the thermocouples you use including types J, K, T, E, R, S, B, N, G, C, D, L (J-DIN), U (T-DIN) and P (Platinel II). Or calibrate from -13.0000 to +80.0000 mV..
Calibrate RTD instruments to 0.1 & 0.01 degrees-F & degrees-C Stop carrying around a decade box and RTD resistance tables. The 525B works with the RTDs you use including Platinum 10, 50, 100, 200, 500 & 1000 Ohm (alpha = 3850), Platinum 100 Ohm (alpha = 3902, 3916, 3926), Copper 10 & 50 Ohm, and Nickel 120 Ohm. Or calibrate from 0.000 to 400.000 and 0.00 to 4000.00 Ohms..

Replaces 3 speed smoker control, compatible with All Pit Boss Wood Pellet Grills Only.
Bright LED display, shows exact cooking temperature.
Front Panel Cook Control, Cool Down Cycle, for safe, succulent grilling.
Eight Cook Temperature Settings (200 through 475 degrees), Sixteen Smoke Settings (P0 - P15) for Precise Smoke Control.
7" RTD temperature Sensor is simple to install, maintain temperatures more consistently than a manual temperature gauge.

Includes temperature alarm and Water Tight PT-100 RTD Sensor with 1/2" MPT Threads - includes 1/2" FPT SS lock nut and silicone washers. All Metal (aluminum) housing.
Includes 12' 10 Gauge SJOOW Power Cord, 4 prong dryer plug, 3 Prong twist-lock 240V outlet and 120V Pump Outlet.
Controls up to a 5500 Watt 240V element and Compatible with GFCI breakers.
Intended for a 240V BIAB brewery where one heating elements heats strike water, manages mash temperature and does final boil..
One switch flips between PID controlled mash and full PWM boil control. Water resistant all aluminum housing..

Easy to Use: Replacement for Traeger BAC365, Compatible All Traeger wood pellet grill models (except PTG, PTG+, Tailgater, Junior, Bronson Commercial....
Easy to install: Includes 1 x digital thermostat control board.
2 x Meat Probe Replacement. 1 x RTD temperature Probe sensor , Sensor and Meat Probe....
Accuracy: Eight Cook Temperature Settings 180 to 375 degrees (up to 450). Multiple temperature adjustments. you can choose your favorite cooking mode..
Temperature Control: Special Smoke Mode, Supports Low-temperature Lmoking, Which Allows Users to Control The Speed of Feeding, Equipped with Safety....
Easy to Read: It's easy to display accurate temperature and also you can read in direct sunlight through our digital pro controller..

120 VAC Mash Tun or RIMS (Recirculation Infusion Mash System) Tube Controller with pump control. All Metal (aluminum) housing.
Supports a 1500 to 2250 Watt Heating Element and anything in between. Please verify the outlet you will plug into will also support the wattage you intend to use..
Includes temperature alarm and Water Tight PT-100 RTD Sensor with 1/2" MPT Threads - includes 1/2" FPT SS lock nut and silicone washers.
8' Power Cord with 3 prong plug and All aluminum housing for safety.
120VAC pump outlet controlled by the master mushroom switch and it's own on/off switch..

INA114 is a low-cost, high-precision instrumentation amplifier that only requires an external resistor to set the gain, and the gain range is 1 to 10000..
the weak signal detection effect is excellent, and can input single-ended signals or differential signals..
Chip features: Offset voltage 50uV, drift 0.25μV/℃, and high common mode suppression, 115dB when G=1000.
Module application: bridge amplifier, thermocouple amplifier, RTD sensor amplifier, medical equipment, data acquisition front end.

Replaces 3 speed smoker control, the temperature control panel is compatible with All Traeger wood pellet grill models (except PTG)..
With bright LED display, the digital thermostat kit shows exact cooking temperature..
Eight Cook Temperature Settings (180 through 375 degrees)..
Front Panel Cook Control, Cool Down Cycle, for safe, succulent grilling..
7" RTD temperature Sensor is simple to install, maintain temperatures more consistently than a manual temperature gauge..

Replacement Traeger BAC365, Compatible most Traeger wood pellet grill models. Tips:We recommend that the length of the ignition rod inserted into the....
Eight cooking settings. 180 to 375 degrees Fahrenheit (up to 450)! Multiple temperature adjustments. You can choose your favorite cooking mode..
Digital Led Temperature Display, clear display at any angle, high-definition.Equipped With Dual Integrated Meat Probes and 7" RTD Temperature Sensor..
Special smoke mode, which allows users to control the speed of feeding, and supports low-temperature smoking..
Equipped with safety device, front panel cook control, cool down cycle, for safe succulent grilling.Please duble check your grill model before you....