ReviewsRtl Sdr Usb Dongle

YOTENKO SMA Male to UHF Female SO239 RF Coaxial Adapter SO-239 UHF Coax Connector Converter 50 Ohm for SDR UV5R Baofeng UHF/VHF Handy Talkie Radio HT Radio Antenna Pack of 2

➦CONNECTOR - UHF Female (center hole) and SMA Male (center pin) │Impedance: 50 ohm│Temp.range: -65~ +165℃(PE Cable -~ +85 ℃)│Insulation resistance: 5000MΩ..
➦APPLICATION - UHF Female to SMA Female Adapter/Converter. Connect Baofeng Radios to Base Station Antenna. Used widely at UHF,VHF Frequency Connect and Radio Station Antenna Convertion.
➦COMPATIBLE WITH -Connect UHF to SMA type device.Widely used for Baofeng UV5R UHF/VHF handy talkie radio,HT radio,SWR analyzer,SDR,Antennas, Mobile scanner,Broadcast, CB Radios, Wi-Fi, Telecom, Coaxial cable, LMR, Wireless LAN Devices, CCTV, Microwave Applications and Digital Communication System.
➦ADVANTAGE - Solid well made and pure brass Internal pin, gold-plates and nickel-plates shell can ensure a lower VSWR and has good oxidation resistance,low-corrosion. It is tight fit on both ends and works well to adapt from rooftop scanner antenna to RTL-SDR dongle Baofeng radios,etc.
➦PACKING - Pack of 2 Well Constructed SMA Male to UHF Female SO239 Connectors.

Check Stock

NooElec NESDR Smart XTR Bundle - Premium RTL-SDR w/Extended Tuning Range, Aluminum Enclosure, 0.5PPM TCXO, SMA Input

Premium RTL-SDR bundle includes NESDR SMArt XTR in beautiful brushed aluminum enclosure, re-designed antenna base with 2m (6.5') RG-58 feed cable, and 3 antenna masts.
A wide variety of improvements on other designs, including ultra-low phase noise 0.5PPM TCXO, 2 separate RF-suitable voltage regulators, custom heatsink, 2 silicone pads and SMA female connector.
Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt series devices side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi.
SDR frequency capability approximately 65MHz-2300MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon (B009LQT3G6).
Proudly built by Nooelec in the USA and Canada! Full 2-year product warranty.

Check Stock

NESDR SMArTee XTR Bundle - Premium RTL-SDR w/Extended Tuning Range, Aluminum Enclosure, Bias Tee, 0.5PPM TCXO, SMA Input

Premium RTL-SDR bundle includes NESDR SMArTee XTR in beautiful brushed aluminum enclosure, re-designed antenna base with 2m (6.5') RG-58 feed cable, and 3 antenna masts.
A wide variety of improvements on other designs, including integrated 4.5V 250mA bias-tee, ultra-low phase noise 0.5PPM TCXO, 2 RF-suitable voltage regulators, custom heatsink, 2 silicone pads and SMA female connector.
Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt series devices side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi.
SDR frequency capability approximately 65MHz-2300MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon (B009LQT3G6).
Proudly built by Nooelec in the USA and Canada! Full 2-year product warranty.

Check Stock

Nooelec NESDR Smart v4 Bundle - Premium RTL-SDR w/Aluminum Enclosure, 0.5PPM TCXO, SMA Input & 3 Antennas. RTL2832U & R820T2-Based Software Defined Radio.

Premium RTL-SDR bundle includes newly designed NESDR SMArt in beautiful brushed aluminum enclosure, re-designed antenna base with 2m (6.5') RG-58 feed cable, and 3 antenna masts. Proudly built by Nooelec in the USA and Canada! Full 2-year product warranty.
A wide variety of improvements on other designs, including ultra-low phase noise 0.5PPM TCXO, RF-suitable voltage regulator, custom heatsink, 2 silicone pads and SMA female connector.
Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi.
SDR frequency capability approximately 25MHz-1700MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, available on Amazon (Product ID B009LQT3G6).
An 8pc SMA adapter set and carrying case is also available on Amazon (Product ID B073JT98RR).

Check Stock

onelinkmore SMA Female to SO239 Female RF Two Way Radio Coax Adapter UHF Jack SO-239 Antenna Cable Connector for CB Radio Walkie Talkie SDR UV-5R Series Handheld Radio Pack of 2

UHF Female to SMA Female Adapter Converter.
Well Constructed and Connection Pins Are Gold-plated for Secure Connections,The connector housing and pin in center are made of pure brass,the shell is gold-plates and nickel-plates ,to ensure a lower VSWR for higher transmission efficiency..
Used widely at UHF,VHF Frequency Connect and Radio Station Antenna Convertion.
Not only allow you to attach antenna to the CB radio, and great used with DMR HT with an external antenna, but also works well to adapt from rooftop scanner antenna to RTL-SDR dongle.
Package Content : 2 x SMA Female to UHF Female Adapter.

Check Stock

Natruss Software Defined Radio with Telescopic Antenna Base RTL-SDR R820T2 V3 RTL2832U

With RTL2832U ADC chip, R820T2 tuner, 1PPM TCXO, SMA F connector and aluminum case with passive cooling.
Tuning from 500 kHz to 1.7 GHz up to 3.2MHz (stable to 2.4 MHz) (HF works in direct sampling mode).
Ideal for using as a computer-based radio scanner with free software such as SDR#, HDSDR, SDR-Radio, GQRX or SDR Touch on for Android.
Suitable for Windows, for OSX, for Linux, for Android and for Raspberry Pi.
Ideal for many applications including general radio scanning, air traffic control, public safety, etc..

Check Stock

NooElec NESDR Mini 2+ Al: 0.5PPM TCXO RTL-SDR & ADS-B USB Receiver Set w/Heavy Duty Aluminum Enclosure & Antenna. RTL2832U & R820T2 Tuner. Low-Cost Software Defined Radio

An antenna, suction mount and SMA RF adapter are included.
Included heavy-gauge aluminium enclosure, fully assembled and ready to go! Large enough to add internal circuitry, if desired.
0.5PPM TCXO installed as standard--rock solid tuning under nearly any conditions!.
SDR frequency capability 24MHz-1700MHz (approximate), extendable down to 100kHz with our Ham It Up upconverter (sold separately, B009LQT3G6).
Contains RTL2832U & R820T2 chips for full compatibility with nearly all RTL-SDR applications.

Check Stock

Blueshadow 2-in-1 USB WiFi Bluetooth Adapter - Dual Band 2.4G/5G Wireless Network Adapter Mini WiFi Dongle for PC/Desktop/Laptop Support Win 7/8/10 USB WiFi 600Mbps

WIFI DONGLE FOR DESKTOP PC WITH BLUETOOTH: New Upgrade Technology, Based on The Original Wifi Function, Our Wifi Adapter Added Bluetooth Function, Both Are Compatible, Both Portable Wifi And Bluetooth Adapter.
HIGH PERFORMANCE WIFI CARD CHIP: The high-performance chip (RTL8821CU) is added to maximize the performance of the USB computer network adapters. The strong performance makes the 100M broadband operation of the usb wifi dongle without pressure.
DUAL-FREQUENCY SUPPORT: The Usb Bluetooth Adapter Supports 2.4Ghz and 5.8Ghz Signal Frequencies, Providing Stable Data Transmission, Whether It Is Running Large Games, watching 4K Videos, Live Streaming, Surfing the Internet, This Usb Bluetooth Adapter Is Not Even Disconnected, Delayed, Or Lagged.
SUPPORT SYSTEM: 600Mbps wireless adapter for pc fully compatible with system—Win 7/8/10, Mac Os 10.5~10.15, LINUX 2.168~4.8.

Check Stock

Honiwu 125MHz Upconverter Set Variable Frequency Board SDR Receiver Upconverter with Data Cable

COMPATIBILITY - RTL2832+R820T2 receivers are available for SDR upconverter groups, radio platforms are available, etc..
EASY INSTALLATION - SDR up converter is compact in size, simple in structure, stable in connection, easy to install and operate..
EXCELLENT MATERIAL - The combination of ABS and PCB materials has good contact performance to ensure stable work..
CONNECTIVITY - Comes with wiring and data cables, low noise operation, low interference and high usability..
OWN FACTORY - Strictly inspect the production of goods, check the details of production, and ensure stable production quality..

Check Stock

SDR upconverter Low Noise Compatibility Good 125MHz RTL2832R820T2 upconverter Board Compact Size for Receiver

FREQUENCY: The local oscillator of the upconverter is 125MHz, and the frequency is variable, which is suitable for more radio experiments..
COMPACT SIZE: This SDR upconverter board has compact size and simple structure, with stable connection, easy installation and operation..
GOOD COMPATIBILITY: SDR upconverter set can be used for RTL2832+R820T2 receiver, for radio platform, etc., has good compatibility..
EXCELLENT COMPONENT: Using excellent ABS and PCB material components, the terminal has good contact performance, ensuring stable working..
EASY CONNECTION: Equipped with wiring and data cable, which is easy to connect, has low noise operation, less interference and strong practicability..

Check Stock

Wendry Radio Antenna, PCB Board Mini-Whip MF/HF/VHF/SDR Green Antenna Micro Radio Antenna for Ore Radio and Transistor Radio

Mini-Whip MF/ HF / VHF / SDR antenna or miniwhip shortwave active antenna is suitable for ore radio and tube (transistor) radio, meanwhile, RTL-Sdr receives for Hack..
Using high-quality PCB board, it is with continuous connection, via precision craft by many experts..
Its effective frequency band includes medium, short and ultra short waves. And you can use it in confidence..
Such an antenna is entitled with high performance according to strict rule, and it is easy to use in the practical life..
Made of Metal + PC materials in high quality, it can get great popularity, entitled with practial adoptability..

Check Stock