ReviewsRtx 3 Speed Rotary Tools

YEEZUGO 10 pcs Diamond Cutting Wheel Cut Off Discs Coated Rotary Tools W/Mandrel 22mm for Dremel

  • Compatible with Dremel, Wen ect. Rotary Tools .Turn your rotary tool into high-speed cut-off saw & grinding machine..
  • The Cutting Wheels are sharp and strong, making them perfect for Cutting gemstones, glass, geramics, porcelain, tiles, carbide, rocks, aluminium and copper.
  • All Discs have Breathing Holes which is designed for heat reduction and removal of debris while using..
Check Stock

TEMO 100 pc 1/2 Inch Sand Drum Grit 60 Coarse with 2 pc 1/8 Inch Mandrel Compatible for Dremel Rotary Tools

  • 100 PC 1/2" (12.7mm) sand drum with 2 Mandrel Compatible for dremel grit 60 coarse.
  • 100 piece 1/2" (12.7mm) 60 Grit, 1/2" (12.7mm) Diameter.
  • 2 piece 1/2" (12.7mm) X 1/2" (12.7mm) Rubber Mandrels.
  • 1/8" (3.175mm) shank size (Compatible for Dremel and other Rotary Tools).
  • Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing..
  • 3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.003cbr003e4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task..
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock

TEMO 100 pc 1/4 Inch Sand Drum Grit 60 Coarse with 2 pc 1/8 Inch Mandrel Compatible for Dremel Rotary Tools

  • 100 PC 1/4" (6.35mm) sand drum with 2 Mandrel Compatible for dremel grit 60 coarse.
  • 100 piece 1/4" (6.35mm) 60 Grit, 1/4" (6.35mm) Diameter.
  • 2 piece 1/4" (6.35mm) X 1/2" (12.7mm) Rubber Mandrels.
  • 1/8" (3.175mm) shank size (Compatible for Dremel and other Rotary Tools).
  • Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing..
  • 3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.003cbr003e4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task..
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock

Diamond Cutting Wheel Cut Off Discs Coated Rotary Tools W/Mandrel 40mm for Dremel by YEEZUGO

  • Designed for Dremel, Wen ect. Rotary Tools .Turn your Dremel or other rotary tool into high-speed cut-off saw & grinding machine..
  • The Cutting Wheels are sharp and strong, making them perfect for Cutting gemstones, glass, geramics, porcelain, tiles, carbide, rocks, aluminium and....
  • Suitable for most rotary and air tools, including Dremel..
  • Hot-pressed powder alloy forming, long working life, High hardness and resistance.Diamond Coated for Extra Strength and Long Life of Blades..
Check Stock

Flex Shaft Grinder Rotary Tool, GOXAWEE Hanging Grinding Machine with 3-Jaw Chuck& Stepless Speed Foot Pedal, Power Multi-Function Tool with 131pcs Accessories for DIY and Crafting Projects

  • Professional Flex Shaft Grinder Set: Our flexible shaft rotary tool is equipped with a powerful and stable 380W motor, which can provide the speed of 0 to 24000 RPM. This rotary engraver machine is ideal for large-scale work that cannot be completed by mold grinder or rotary tool. Which can enough for limitless purposes from your DIY furniture remodeling to intricate automobile repairs and expert jewelry making..
  • Practical & Precise: We offer an easy-to-operate rotary carver that reaches the impossible corners and angles for your convenience. The lightweight, reduced vibrations, and hanging design make this flexible shaft smooth and easy to maneuver in your backyard, garage, or workshop..
  • Wide Compatibility: The stable and convenient three-jaw chuck for the jewelers tools accepts accessories from 1/8",  3/32", 1/16",  1/32", 1/64", 5/32'' to enhance versatility. Attachments are easy to replace and strong clamping force holds them firmly on the flex shaft drill under high pressure..
  • Comfortable Stepless Speed Foot Pedal: Our rotary tool kit includes a foot pedal for the added comfort of your hands during work. The ABS plastic foot pedal for flex shaft rotary tool is more secured than any metal variant due to its safety-oriented material which preven....
Check Stock

XUCHUAN Rotary Files 10 PCS HSS Rotary Burrs Rotary Tools Fit Power Tools Woodworking,Carving, Engraving

Check Stock

AOTE-PITT Cordless Rotary Tool Kit, 4V Mini Rotary Tool with 72 Pcs Rotary Accessory, 3-Speed 18,000 RPM Multi-Purpose Power Tool with USB Charge for Sanding, Polishing, Drilling, Engraving, DIY

  • 【Mabuchi motor】AOTE-PITT 4V electric rotary tool has a built-in Japanese Mabuchi motor, with an improved motor while the vent holes on the body effectively dissipate the heat released when the power rotary tool is running, extending battery life for long-term and safe use. 3-speed selections, 5000 rpm all the way up to 18000 rpm speed make your artwork DIY creation quite easy thing..
  • 【LONG RUNTIME】USB charging design make this lithium-ion rotary tool battery charge so convenient. 1500mAh lithium battery is installed in the electric rotary tool. It can run 90 mins after a fully charged (No load runtime 150mins). 3 LED battery indicators show you the level of battery power..
  • 【MULTIPLE PURPOSES】Whenever you are thinking of: engraving, sharpening, grinding, polishing, or sanding, you will find this power rotary tool set a must-have for your handy & light artwork creation with optimum precision and control. It is suitable for wood, plastic, tile, glass, stone, metals, etc. Extensively works for Delicate & Light DIY Small Projects. This battery rotary tool has a chuck ability ups to 1/8” that is compatible with almost accessories on the market..
  • 【EASY OPEERATION】 One button controls all, depressed for 2-3 seconds to power the cordless rotary....
Check Stock

GYROS 1.75” Mini Resin Cut-Off Wheels for Rotary Tools | 2 Double Fiberglass Reinforced Discs | For Wood, Plastic, Stone, Aluminum, Copper, Brass | Dremel Cutting Tool Accessory | Made in USA 11-21702

  • ...e a maximum speed of ​​42,000 RPM..
  • Double Reinforced, High Quality - Cutting discs are made of fiberglass abrasive with a double reinforced structure, they have a great working efficiency, unrivaled strength, and flexibility, are long-lasting and break-resistant. Professionals and hobbyists looking for the best rotary tool accessories for Dremel and other top-brand rotary tools will appreciate the Gyros Fiber Disk LT Multi-Set..
  • Low Tensile Strenght – Gyros LT mini cutting discs are designed to cut a variety of materials, including Wood, Plastic, Stone, Ceramic, Aluminum, Copper, and Brass. Because the abrasive used is perfectly matched to the materials being cut, the cutting action is superior. Other formulations are HT – stands for High-Tensile Strength materials such as steel alloys, hard bronze, and metals. ST – stands for Super-Tensile Strength materials such as stainless steel and titanium..
  • Works with Variety of Tools – These cutting disks are compatible with a wide range of Rotary Cutting Tools, including Dremel tools, electric drills, hanging grinders, and so on, making them the ideal rotary cutter. Use with Gyros Stainless Steel Mandrel SKU 80-18100 for optimal results. Works great with GYROS ProwerPro Rotary Tool SKU 40-00470. Fo....
Check Stock

GYROS 1.75” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-41702

  • ...ity – Our cutting discs have high efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk ST Multi-Set is a must-have for Professionals and Hobbyists looking for the finest rotary tool accessories for Dremel and other top brand rotary tools..
  • Super Tensile Strength – Gyros ST mini cutting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensile Strength, such as steel alloys, hard bronze, and metals..
  • Works with Variety of Tools – These cutting discs are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and so on, making them the perfect rotary cutter. For best results use with Gyros Stainless Steel Mandrel SKU 80-18100. Works great with GYROS ProwerPro Rotary Tool SKU 40-00470. For your safety - always....
Check Stock

Vastar Power Rotary Tool Kit, Mini Rechargeable Engraver Tool with 211 Accessories, 3 Attachments, 6 Levels Adjustable and Carrying Case for Crafting, Cutting, Engraving, Drilling, Grinding, Polishing

  • 【Multiple Uses】Vastar rotary tool kit contains 211 accessories and 3 accessories, and provides 6-level speed change, the speed is from 8000 revolutions per minute to 35,000 revolutions per minute. Multifunctional accessories cover drilling, engraving, grinding, polishing, rust removal, peeling, cleaning and cutting needs. Suitable for a variety of materials, such as wood, metal, ceramics, stone, glass and plastic..
  • 【Functional Advantages】The high-performance rotary tool has a powerful motor, which provides powerful rotation power and lower noise. The switch adopts a new sliding design, which is not only beautiful, but also prevents false triggering and protects personal safety. Powerful functions meet all-round needs..
  • 【Structural Advantages】Vastar power rotary tool kit speed adjustment gear mechanism is improved, the gear speed adjustment switch is more stable, the grip can focus on precise engraving, grinding and engraving, and has higher stability. The cutting guide is suitable for cutting of different depths and maintains a good viewing angle and stability..
  • 【Comfortable Use】The rotary tools kit is light and convenient. PUA rubber double mold, exquisite appearance, easy to carry and hang, ergonomic design with stacked mold makes long....
Check Stock

15 Pieces Wood Carving and Engraving Drill Bit Double Cut Carbide Rotary Burr Woodworking Drill Bits Set for DIY Woodworking Drilling Engraving Polishing Supplies

  • You will receive: the package contains 5 pieces wood carving and engraving drill bits and 10 pieces double cut carbide rotary burr, 15 pieces in....
  • Size details: wood carving tools have 5 sizes carving, 3 x 3 mm, 3 x 4 mm, 3 x 5 mm, 3 x 6 mm, 3 x 7 mm, 3 x 8 mm in shank and bit diameter.
  • Durable to use: the wood carving and engraving drill bits are made of high-speed steel, and the double cut carbide rotary burrs are made of tungsten....
  • Easy to use: the 1/8 inch handle fits most rotating tools, just install it like any other typical drill bit easily, will be your ideal choice for DIY....
  • Functional tools: our practical tool accessories provide you delicate fine processing, widely applied in metal, woodworking, model engineering,....
Check Stock