ReviewsRubber Clamping Profile

Accusize Industrial Tools 1/2'' Shank Heavy Duty Indexable Grooving/Cut-Off Holder, Nickel Plated, with a Gtn-2 Tin Coated Carbide Insert, 2415-5024

For shallow precision grooving and profile/copy turning.
O-ring. snap-ring, relief grooving and high production.
Opening of wide grooves by plunging and side turning.
Precision clamping and insert indexing accuracy.
Stable under side cutting forces when profile turning.

Check Stock

Forward 8-Inch Bench Vise Ductile Iron with Channel Steel and 360-Degree Swivel Base HY-30808-8In (8")

Durable and Sturdy: high strength ductile Iron body (60,000 PSI) with best quality U-channel bar.
Rubber washers can prevent the handle from sliding and cancel noise.
Replaceable top machinist jaws and built-in pipe jaws are grooved tooth designed for enhanced grip and higher clamping force(5,500lbs).
More flexible: 360-degree swivel base with dual locking nuts provides unlimited clamping space and more safety.
Tapping work can also be done on the large anvil of the bench vise.
Industrial Grade Vise: This 4" heavy-duty professional vise is suitable for use in the workshop, great for clamping and fixing workpieces.

Check Stock

Forward 6-Inch Bench Vise Ductile Iron with Channel Steel and 360-Degree Swivel Base HY-30606-6In (6")

Durable and Sturdy: high strength ductile Iron body (60,000PSI) with best quality U-channel bar.
Rubber washers can prevent the handle from sliding and cancel noise.
Replaceable top machinist jaws and built-in pipe jaws are grooved tooth designed for enhanced grip and higher clamping force(5,500lbs).
More flexible: 360-degree swivel base with dual locking nuts provides unlimited clamping space and more safety.
Tapping work can also be done on the large anvil of the bench vise.
Industrial Grade Vise: This 4" heavy-duty professional vise is suitable for use in the workshop, great for clamping and fixing workpieces.

Check Stock

Accusize Industrial Tools 1/2'' Heavy Duty Indexable Grooving/Cut-Off Holder, Nickel Plated, with 11 Gtn-2 Tin Coated Carbide Inserts, 2415-5024INS

For shallow precision grooving and profile/copy turning.
O-ring. snap-ring, relief grooving and high production.
Opening of wide grooves by plunging and side turning.
Precision clamping and insert indexing accuracy.
Stable under side cutting forces when profile turning. Extra 10 GTN Carbide Tin Coated Inserts.

Check Stock

Taytools 388107 Quick-Adjust Vertical Workbench Surface Hold Down Clamp, Fits 3/4” Bench Dog Holes

...This clamp will work in tops as thin as 3/4 inch thick..
The cast zinc base is 1-1/2 inches in diameter and 1-1/2 inches tall. The base and post are black coated to resist corrosion..
The moveable jaw slides easily along the serrated rails and then locks down tight when the handle is tightened offering slip-resistant clamping. The jaw is made from reinforced malleable steel and provides powerful and rigid clamping. The serrated carbon steel rail has an hourglass profile to resist flexing and twisting.
The moveable clamp jaw features smooth-turning carbon steel Acme threads and can generate up to 600 pounds of clamping pressure. The screw end has a 1 inch diameter swivel pad with a non-marring clamp pad to allow gripping of odd- shaped parts. Overall spindle travel is 2 inches. Threads are black coated to resist corrosion. The ergonomic soft grip Plastic/TPR handle optimizes torque and reduces hand fatigue..

Check Stock

Nuovoware 2 Pack Bench Dog Clamp 3/4 Inch Adjustable Screw Clamp Woodworking Bench Clip Angle Stop Clamp Workbench Dog Hole Desktop Stainless Steel Brass 19mm Silver+Brass

【Firmly Clamp】: The adjustable bench dogs clamps is designed for firmly holding of wood workpiece. It perfectly fits the woodpiece in any shapes and size, and anywhere on your woodworking bench..
【Easy to Use】: The ratchet wrench is used to adjust the clamping pressure with the least effort by the feature of movable head. It helps the dog hole clamp to deal with various operations effortlessly and greatly improves the clamping efficiency..
【Premium Material】: This bench dog hole clamp is made of stainless steel and brass which features rust-proof, solidity and long lasting in your wood projects. The CNC precision machining of making all the components allows it to be served your daily works for a long time..
【User-friendly Design】: The low-profile design is fully considerate the actual operations in work scenes. Our dog clamps for woodworking sits a bit height from the desktop so it will not hinder when your are doing wood planing, sanding or polishing..
【Wide Application】: Our bench dogs clamp is designed for woodworking and general clamping applications. It can not only as a clamp, but also an adjustable stop for repetitive cuts on MFT table..

Check Stock

Climax Metal H2C-300 Recessed Screw Clamping Collar, Two Piece, Black Oxide Plating, Steel, 3\ Bore Size, 4-1/2\ OD, With 3/8-24 x 1 1/4 Set Screw

Two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars.
Recessed screw head provides an exterior profile free of major projections for increased safety.
Steel for weldability and rust resistance with a black oxide finish for a decorative appearance and for resistance to stick-slip, white corrosion, and abrasion.
Includes socket-head cap screws for securing the collar onto the shaft.
Operating temperatures range from -17 to 148 degrees C (0 to 300 degrees F).

Check Stock

DBM IMPORTS Set 2 Pc Adjustable 3/4'' T-Slot Hold Down Clamp 5/8''-11 Clamping Range

A slidable T-shaped single handle with adjustable rotating jaws can accurately align and fix the workpiece. Rugged and non-slip, it helps to set up and fasten quickly..
The maximum clamping range is about 2.68 inches / 68 mm.
jaw depth: 1.4 inches / 35 mm, which can clamp steel rods, metal pipes, wood, and thick glass materials..
Swing jaw design, single handle jaw can rotate in both directions. The precise right-angle clamping tool is an essential tool for carpenters, handymen and DIY workers..
It can be used as a clamping device for 90° angle seams. Very suitable for aligning, nailing, carpentry, welding, screwing, making cabinets, boxes and photo frames..
The non-slip rubber handle is suitable for holding in the hand for a long time and is comfortable. The angle can be adjusted freely to meet different needs..

Check Stock

UTG M1 Carbine Mount Complete with 1\ Rings , Black

...f Ring. ( Item height: 1.9''). 2 Pack High Profile, 0.71'' Gap from Base of Mount to Bottom of Ring. ( Item height: 2.0'')..
Hollowed-Out Design & Built-In Tape Protection: Design In See-Through Style, Provide Potential Visibility For Open Sights, Meanwhile Hollowed-Out Configuration Helps To Release Heavy Duty When Clamping Your Scope. Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
Premium Aircraft Aluminum, Solid & Durable: Precision Machining of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Sturdy Construction, Build No Wobble, Offer Durable Safe Performance In The Field..
Rail Clamp Screw Design & Easy To Install: With 1 Rail Clamp Screw and 2 Scope Clamp Screws Per Side, Ensure Mount Any 1'' Scope Firmly, Just Twist On/Off The Rail Clamp Screw Nut Via Allen Wrench and Mount The Base On 21mm Rail, Simple and Quick To Remove Or Install. Comes With 2 Pcs Allen Wrench..

Check Stock

Raynesys 4-Inch Bench Vise Ductile Cast Iron Bench Vise with 360° Flexible Swivel Base Heavy Duty Home Work Bench Vice Blue

【Universal 4 Inch Bench Vise】: Jaw Width 4.0inch/10.16cm.
Maximum Opening of Jaw is up to 3.5inch/9cm.
Throat Depth 2inch/5cm. Clamping Force:....
【Multifunctional】: Mounting vise on the workbench, then you could do the work of woodworking, cutting conduit, drilling, gluing, metalworking,....
【Heavy Duty Casting】: Made of high strength ductile iron and chrome-plated spindle and nuts, durable for long-term use and reliable to grip. The....
【Swivel Feature】: Built in 360 degree swivel base, perfect for a wide range of clamping angles. It allows an ever greater degree of accuracy while....
【Rubber Jaws Covers】: Packaged with 100mm rubber vise jaw covers, can be used on any metal vise for holding wood, metal, plastic, tubing, threaded....

Check Stock

UltiClip Slim 3.3

Built for belt-less carry - Minimum Profile, Maximum Concealment.
Military Grade Black Oxide Finish Heat Treated Spring Steel.
Size: 3.3″ x .60″ Dual slotted mounting bracket with up to 1.5" hole spacing.
100% American Made - Maximum clamping thickness .12" (approximately 4 layers of denim material).
Sold individually - Includes 6 piece mounting hardware - Does not include accessories seen in product images.

Check Stock