ReviewsRubber Epdm Seals

Univen Gasket for Stovetop Espresso Coffee Makers 6 Cup fits Bialetti, Imusa, BC, etc. Made in USA 3 PACK

  • Replacement Gasket Seals for 6-Cup Stovetop Espresso Coffee Makers.
  • Approximate Inside Diameter 2.16" (55mm), Outside Diameter 2.83" (72mm)..
Check Stock

ESI Ribbed Rectangle Rubber Seal – .187” Height .500” Width 25’ Length – EPDM Foam Rubber Seal with 3M 4011 Acrylic Foam Tape, Ideal Door and Window, Automotive Weather Stripping, Garage, Cars, Boats

  • ESI Ribbed Rectangle Rubber Seal – .187” Height .500” Width 25’ Length – EPDM Foam Rubber Seal with .375" Width 3M 4011 Acrylic Foam Tape. Fills height gaps from .100" to .168"..
  • Provides excellent resistance to water absorption, ozone, sunlight aging, low temperature and compression set so you can confidently install in a variety of applications.
  • WIDE RANGE OF APPLICATIONS: Rubber seal works on marine, automobile and home cases – providing door, window and hatch seals for cars, trucks, RVs, trailers, boats and more.
  • All products are made from a custom formulated EPDM sponge rubber compound that guarantees protection from weather and noise for years to come. ESI (Extruded Solutions Inc) is a family run business since 2008. MADE IN THE USA.
Check Stock

Trim-Lok Trim Seal with Top Bulb – Fits 1/16” Edge, 3/8” Bulb Seal Diameter, 25’ Length – PVC Plastic Trim with EPDM Rubber Seal, Easy to Install for Cars, Boats, RVs, Trucks, and Home Applications

  • FLEXIBLE PVC TRIM: Trim-Lok Rubber Trim Seal with Top Bulb is a flexible PVC plastic trim with a sponge rubber bulb attached to provide a secure seal for a variety of applications..
  • WEATHER-RESISTANT: This weather-stripping bulb seal provides excellent protection against heat, extreme weather damage, and corrosion. It is also resistant to ozone, water absorption, sunlight aging, and low temperatures..
  • MANY APPLICATIONS: You can use this co-extruded rubber trim seal for a variety of applications including RV slide out seals, boat hatch seals, automotive door seals, storage container seals, tool box seals, decorative trim seals, and so many more..
  • EASY INSTALLATION: Create a durable finished edge seal that protects against the elements with this push-on edge trim with top bulb that’s easy to install. It has internal aluminum metal clips, gripping tongue, and a strong grip with excellent retention..
  • DIMENSIONS: This trim bulb seal fits a 1/16” edge, is 3/8” in diameter and is 25’ long. It’s also available in a variety of other thicknesses and lengths. The durable EPDM foam rubber helps drown out noise, eliminate vibration and protect from elements..
Check Stock

Dow Corning Vacuum Lubricant 5.3oz Tube

  • Low evaporation. High oxidation resistance. Good resistance to water wash-out..
  • Resistance moisture and corrosive atmospheres. Inertness. Good shear stability..
  • Wide service temperature range: -100ºF to 400ºF (-73ºC to 204ºC). Compatible with many plastics..
  • Used to lubricate plastic gears, bearings and cams, as well as metal and rubber parts..
  • SAFE for O-Rings and Other EPDM, Buna, Rubber and Plastic Seats/Seals/Gaskets..
Check Stock

Trim-Lok D-Shaped Rubber Seal (Thick Wall) – .50” Height, .50” Width, 25’ Length – EPDM Foam Seal with BT (3M) High Strength Bonded Tape System, Door/Window Weather Seal for Cars, Trucks, RVs, Boats, 25', Black - X202BT-25

  • EPDM FOAM RUBBER SEAL: Trim-Lok D-Shaped Rubber Seal drowns out noise, eliminates vibration, and protects your vehicle, boat, or home from outside elements..
  • MANY APPLICATIONS: Durable Trim-Lok Foam Seals can be used for marine, automobile, and home cases – providing hatch, window, and door seals for cars, trucks, RVs, trailers, boats, and more!.
  • WEATHER-RESIST: These rubber D-seals provide excellent resistance to water absorption, ozone, sunlight aging, low temperature, and compression set. General temperature rating of -20°F to +158°F. It is a reliable weatherstrip seal for many applications..
  • EASY INSTALLATION: Adhesive-backed D-shaped seals made with two options: BT (3M) tape is a high-strength automotive-grade tape, while HT tape is a general-purpose pressure sensitive tape. Both offer quick, easy, and efficient installation..
  • DIMENSIONS: This weather-stripping adhesive rubber seal measures .50” in height, .50” in width, and is 25’ in length. It is also available in a variety of edge thicknesses and can be cut to fit your specific application..
Check Stock

Dow Corning Molykote 33 Light Grease Lubricant 5.3oz 150g Tube

  • Low evaporation. High oxidation resistance. Good resistance to water wash-out..
  • Resistance moisture and corrosive atmospheres. Inertness. Good shear stability..
  • Wide service temperature range: -100ºF to 400ºF (-73ºC to 204ºC). Compatible with many plastics..
  • Used to lubricate plastic gears, bearings and cams, as well as metal and rubber parts..
  • SAFE for O-Rings and Other EPDM, Buna, Rubber and Plastic Seats/Seals/Gaskets..
Check Stock

DEKTITE #2 (DFE102B) Square Black EPDM Flexible Pipe Flashing, Roof Jack, Pipe Boot Flashing Dektite (for OD Pipe Sizes 1/4\ - 3\)

  • Dektite Base Seals Against Uneven Metal Roofing with Ease. Pipe Flashing Will Not Break or Crack..
  • This Pipe Flashing Boot Made By Deks is Made of EPDM for Long Life Even at Extreme Temperatures.
  • Black Dektite Pipe Flashing is Rated for Continuous Service Temperature Ranges of -58˚F to +239˚ F.
  • EPDM Rubber Boot with Flexible Base (Aluminum Collar). Pipe Boot Fits 1/4" to 3" Pipe OD..
  • Metal Roofing Pipe Flashing Boot is Designed for on-site Adjustment with a base of 7" x 7".
Check Stock

Dow Corning Molykote 33 Medium Extreme Low Temperature Bearing Grease 400g 14oz Cartridge

  • SAFE for O-Rings and Other EPDM, Buna, Rubber and Plastic Seats/Seals/Gaskets..
  • Used to lubricate plastic gears, bearings and cams, as well as metal and rubber parts..
  • Wide service temperature range: -100ºF to 400ºF (-73ºC to 204ºC). Compatible with many plastics..
  • Low evaporation. High oxidation resistance. Good resistance to water wash-out..
Check Stock

L R Liquid Rubber EPDM Rubber and RV Roof Primer - Weatherseal Camper and Trailer Roofing Coating 1 Gallon

  • WHY EPDM PRIMER - EPDM Primer is a rubber polymer water-based roofing primer, designed for adhesion bonding on EPDM surfaces..
  • RV ROOFING MAINTENANCE - Weatherproof RV roofs and other EPDM rubber surfaces by first applying this EPDM Primer before applying the actual waterproof sealant or seam tape.
  • EASY TO APPLY - Apply using a conventional brush or roller equipment.
  • may also be sprayed using a delivery system and nozzles appropriate for this material.
  • APPLICATION - All surfaces should be clean, dry, and free of contaminants that may result in a surface that is uneven or not sound.
  • FOR A BULLETPROOF SYSTEM - Liquid Rubber RV Smart Cleaner before Primer application.
  • EPDM Primer improves adhesion for Seam Tape and other Liquid Rubber RV Roof Coating.
Check Stock

Box of 12 Tubes Dow Corning Molykote 33 Light Extreme Low Temperature Bearing Grease

  • Genuine Dow Corning Molykote 33 Light 14 grams (0.5 ounces). Recommended by Many Paintball Manufacturers..
  • Low evaporation. High oxidation resistance. Good resistance to water wash-out..
  • Resistance moisture and corrosive atmospheres. Inertness. Good shear stability..
  • Used to lubricate plastic gears, bearings and cams, as well as metal and rubber parts..
  • SAFE for O-Rings and Other EPDM, Buna, Rubber and Plastic Seats/Seals/Gaskets..
Check Stock

URO Parts 54138218001 Sunroof Seal

  • Long-life EPDM rubber seals out water and airborne debris.
  • Precise fit and OE-style seal profile minimizes squeaks and wind noise.
  • Smooth seal surface resists sticking between sunroof and body.
  • High-quality material is heat and UV-resistant.
Check Stock