ReviewsRubber Mounting

Kicker 41KM604W 6-1/2\ 6.5\ KM-Series 150W Peak/50W RMS Marine Speakers KM60 New Bundle with Pair Rockville MAC65W 6.5\ White Aluminum Wakeboard Tower Speaker Pod Enclosures

Santoprene surrounds. Woofer Size: 6.5". Woofer Composition Polypropylene. Tweeter Size: 1/2". Tweeter Dome Material:PEI (Polyetherimide). Impedance:4-Ohms. Sensitivity: 90dB. FrequencyResponse:35-21,000 Hz. Cutout Dimensions:5.18". Top-Mount Depth:2.5". Grilles: White Only. 2 Wakeboard Cans. All mounting hardware. (2) 2.375 rubber inserts. (2) 2.25 rubber inserts.
(2) 2.5 rubber inserts. (2) 2 rubber inserts. Features: Pair of RockvilIe MAC65W white aluminum can wakeboard tower enclosures. Made of high quality 6061 aircraft grade aluminum. Beautiful white powder-coat finish. 100% waterproof and fully marinized against salt and fresh water conditions. Internally wired for clean installno exposed wires or terminals.
High efficiency design features the perfect airspace for 6.5 speakers. Rugged universal mounting clamps made of 6061 aluminum. Includes precision molded, high impact plastic inserts for tower fitment from 2 diameter to 2.5 diameter. Mounting Depth - 6.7". Total Depth - 9.15". Cutout - 5.55". Diameter - 7.39". Mounting diameter - 6.4" (Narrow diameter - 6.12"). Height of mount - 3.75".
Total height of unit - 11". Total height of unit - 11".

Check Stock

2Way Custom Component Speaker System 6.5” 400 Watt Component with Electroplated Plastic Basket, Butyl Rubber Surround & 40 Oz Magnet Structure Wire Installation Hardware Set Included Pyle PLG6C

...low distortion and providing an open sound stage.
HEAVY-DUTY COMPONENT: The 40 oz. magnet structure, special electroplated plastic basket, and 0.5” silk dome tweeter are what power these speakers and allow for a 90 Hz to 20 kHz frequency response.
It features a Standard 6.5” size that fits OEM locations.
MULTIPLE MOUNTING OPTIONS: Allows 3 mounting options - flush, surface, or angle. This 4-ohm component also features a mounting depth of 2.65”, ensuring your speakers will stay in place.
WIRING KIT INCLUDED: This audio speaker compensates the undersized wire found in many of today’s cars. Includes grills, wires, and mounting hardware. Midrange tweeter helps to provide smooth & loud sound.
400watt 2way custom component system includes pair of woofers, tweeters, and crossovers.
6.5inch woofers with yellow poly injection cones and butyl rubber surrounds.
0.5inch silk dome tweeters with neodymium magnets and multiple mounting options.
Pair of passive crossover networks with 12 dB/octave slope.

Check Stock

Hicarer 2.8 Inch (70 mm) Roman Numeral Quartz Clock Insert with Gold Trim

Dimension: the overall diameter of the clock insert is 2.8 inch (70 mm) that refers to the front face outside maximum diameter including the colored bezel.
Features: the quartz clock insert features a gold colored trim, clear plastic lens, and black roman numerals on white dial for easy reading.
Mounting diameter: fit round hole diameter: 2.4 inch (61 mm).
Great for crafts or replacing old clock faces.
Rubber band mounting system: complete with rubber band gasket to securely hold the insert in place, which allow for slight irregularity in the hole.
Power: require 1 piece AAA battery (not included).
Warm note: clock is intended for indoor use only, not weather resistant.

Check Stock

Eyourlife LED Light Bar Side Mounting Brackets with Rubber Pads, Universal Fit Metal Side Brackets Kit with Bolts, Sturdy Light Mounting Replacement for Rigid or Curve Light Bars for Jeep Truck & SUV

【STABLE】Firmly fix the light bar on place, and improve air flow for better heat elimination..
【MATERIAL】Heavy duty Die-cast aluminum. With anti-vibration rubber gaskets to avoid damage to your car paint, and raise the light bar height avoid scratching during driving. Stable and Durable..
【UNIVERSAL】Can perfect apply to most side mounted LED Light Bar in the market. Apply to most side mounted straight or curved LED light bars..
【ADJUSTABLE】Angle-Adjustable side mounting brackets allow to achieve optimal angle you need. Dual mounting ways for different mounting application..
【PACKAGE INCLUDES】2 * Side Mounting Brackets + 2 * Rubber Pads + Necessary Mounting Hardwares (Bump protection ring, Screw set for a strong supporting)..

Check Stock

Pro-Parts 4 Pack Air Compressor Replacement Rubber Feet No.219 Foot Mount Vibration Pads

Brand New -Air Compressor Replacement Rubber Feet.
Counterbore Diameter -3/4". Mounting Hole Diameter - 1/4".
Made out of durable rubber, High quality replacement feet.

Check Stock

Hicarer 3-1/8 Inch (80 mm) Clock Insert with Roman Numeral, Quartz Movement, Gold Trim

Dimension: the overall diameter of the clock insert is 3-1/8 inch (80 mm) that refers to the front face outside maximum diameter including the colored bezel.
Mounting diameter: fit round hold diameter: 3 inch (76 mm).
Mounting depth: 0.7 inch (18 mm), good for making crafts or replacing clock faces. Please check the size of the clock movement prior to purchase to verify whether it can fit over your clock..
Suitable appearance design: two hands with black roman numerals on dial allow for easy reading.
Rubber band mounting system: equipped with rubber band gasket to securely hold the insert in place, which allows for slight irregularity in the hole.
Power: 1 x 1.5 V AA battery (not included).

Check Stock

Nilight - 90028D 4PCS LED Light Bar Horizontal Bar Clamp Mounting Kit Fit on 0.75 1 1.25 Bull Bars Roof Racks Roll Cages for ATV UTV and Trucks 2 Years Warranty

Multi-application: The mini bar clamp is designed for a smaller horizontal tube size: 0. 75”, 1”, 1. 25”. It is applicable for roof racks, roll....
High Compatibility: Compatible with various types of light bar brackets, the 10mm screw hole diameter fits all light with 8mm mounting screws..
Perfect Fit Rubber Inserts: Rubber inserts/strip are designed with rubber teeth that can fit perfectly and grip securely with the thread of inside....
Built With Quality: Clamps are built using precision-welded cast sturdy aluminum, makes it lightweight, but pretty neat and durable!.
Make Light Mounting Easier: With the high compatible bar clamp, you’re free of the hassle of lighter mounting and drilling holes in your vehicle....

Check Stock

Side Brackets, AKD Part Light Bar Mounting Brackets Kit Universal Side Mount Offroad Truck LED Bar Brackets 2 Pack

DIMENSION: 3.66 * 1.7 * 1.28 inch.（*DO NOT COME WITH LED LIGHT BARS）.
MATERIAL: Heavy duty Die-cast Aluminum. With anti-vibration rubber gaskets to avoid damage to your car paint, and raise the light bar height avoid scratching during driving..
APPLICATION: Can perfect apply to most side mounted Straight / Curved LED Light Bar in the market..
ADJUSTABLE: Angle-Adjustable side mounting brackets allow to achieve optimal angle you need..
PACKAGE: Including 2 * Side Mounting Brackets + 2 * Rubber Pads (For a Steady Installation) + Necessary Mounting Hardwares (Bump protection ring, 8mm Screw set for a strong supporting)..

Check Stock

Ultimate Protective License Plate Cover and Bumper Guard | Thick Heavy Duty Rubber Prevents Scratches and Dents in Low Impact Bumps | Universal Fit for Cars,Trucks SUVs and Vans Screws Included

... great looks that perfectly combine with its fantastic function, the AR-PRO Ultimate License Plate Bumper Guard keeps your car's front bumper in pristine condition whether you have an SUV, van, or truck. This front bumper protector fits standard US license plate size of 6 inches by 14 inches. And with an adjustable mounting tab, it's easier to mount even on vehicles that don't have standard license plate mounting holes..
EASY AND QUICK INSTALLATION WITH MOUNTING HARDWARE INCLUDED - All you need is the screwdriver you used to remove your license plate! The license plate bumper guard comes with thick adjustable mounting tabs, 4 mounting screws, 4 washers, and 4 screw caps for an easy and quick installation..
A FEW DOLLARS NOW TO SAVE YOU BIG LATER - Save yourself from the headache of front bumper dents and scratches. Each day you drive or park your car without an extra-thick rubber bumper shield you are risking minor but still costly long-term damage to your car. Protect one of your most important investment with the AR-PRO Ultimate License Plate Bumper Guard and save big bucks in the long run..

Check Stock

BRCOVAN Aluminum Alloy 17mm Ball Handlebar Mount Base for Garmin GPS Mount & Motorcycle Bike Phone Holder

...t base made of 6061-T6 aluminum alloy material. TPU over-molding ball head, with non-slip design..
▶ The 17mm ball mount base accommodates handlebars 0.5 inch(12mm) / 0.87''(22mm) / 1''(25mm) / 1.26 inch(32mm) in diameter..
▶ Set come with three soft rubber ring inserts to provide a snug fit and protection of the mounting surface. Rubber ring diameter: 0.5 inch(12mm), 0.87 inch(22mm), 1 inch(25.4mm). You can add or remove them depending on the size of the handlebars. When the rubber ring insert is not embedded, the hole diameter of the mounting base is 1.26" (32mm)..
▶ The attached 0.5-inch rubber insert allows you to install the ball base on the rear-view mirror frame or mini handlebar. The package also come with an 8cm non-slip tape and an Allen key..
▶ This 17mm(0.67 inch) ball handlebar mount base only compatible with 17mm ball socket component, including some double socket arms, navigation mounts, action camera mounts, bike & motorcycle phone mount holders and others electronic device holders. Suitable for installation on bike, bicycle, motorcycle, stroller, mountain bike, dirt bike, trek bike, road bike, golf cart, electric scooter, ATV, etc..
▶ Please note: This is 17mm(0.67 inch) ball base, not 1 inch ball base. It only compatible with 1....

Check Stock

Metabo HPT Miter Saw Stand | Universal, Portable, Quick-release Mounting Brackets | Accepts up to a 12-inch Sliding Miter Saw | Supports up to 400 lbs | UU240F

MATERIAL SUPPORT: Extend 8 ft for supporting longer material.
HEAVY DUTY: Steel construction which can support up to 400 lbs.
LIGHTWEIGHT: Stand weighs only 50 lbs. for stability and easy transport.
MITER SAW SIZE: Accepts up to a 12 In. sliding compound miter saw.
EASY SETUP: Tool-less height adjustment of material supports for quick and easy set-up.
EASY MOUNTING: Quick-release mounting brackets allow for easy mounting and removal of miter saw on the stand.
RUBBER FEET: Non-marring rubber feet on mounting brackets prevent surface damage when saw is removed from stand and placed on finished surfaces.
MATERIAL STOPS: Installed material stops are adjustable for repetitive cutting applications.
WARRANTY: Covered by Metabo HPT's Professional 5-Year Tool Warranty.

Check Stock