ReviewsRubber Plastic Dispersion Mixer

Magic Bullet

★【PREMIUM QUALITY】4inch"/10.4cm diameter, 175g, Food Grade Plastic and High-Srength Stainless Steel, BPA free, 6-Fin Blades For Quick Processing.
★【APPLY TO】FITS NutriBullet 600W and Nutribullet Pro 900 High-Speed Blender/Mixer System, NOT FITS NutriBullet Lean, RX, Magic Bullet or Ninja....
★【PERFECT SEAL】 Rubber Gasket Pre-installed in Base for Complete Seal with Cup are Safe and Durable, Providing a Good Seal and a Long Service....
★【PACKING INCLUDES】1x Extraction Blade(Gray Invisible Thick Gasket Is Installed), 2x Rubber Gasket, 3x Shock Pad, 1x Motor Top Base Gear, 1x....
★【GREAT FUNCTIONS】Great for Smoothies and Frozen Drinks: the cross blade replacement part is perfect for chopping, grating and blending. Whips....

Check Stock

Mixer Mover for KitchenAid Artesian Tilt Head

This product fits under your KitchenAid mixer and allows it to glide out for use. With the plastic side down and black foam side against the product....
This patient pending Mixer Mover is cut to fit perfectly under your mixer.
You can slide your mixer out from under your countertop with one finger.
KitchenAid not included, this is for the Mixer Mover only. Measurements: 13.5"x8.5"x.375".
Try out the Mixer Mover it helps move your mixer with ease.

Check Stock

Rubber Push in Bumpers, 1/4" Hole - Quantity 8

Univen bottom rubber mixer foot fits KitchenAid Stand mixers.
Fits KitchenAid mixer 4K5SS, 4KB25G, 4KD26, 4KG25G, 4KG25H, 4KP26M, 4KSM50, 4KV25H, 5K5SS, 5KPM5, 5KSM5, 9KSM5, K4SS, KB26G, KD2661, KG25H, KL26M, KP26M, KSM45, KSM50, KSM7581, KT2651, KV25G, KV25H, KV25M.
Only fits mixers that have a holes on the bottom that are approximately 3/8" (10mm).

Check Stock

YUCHENGTECH Dispersing Disc Dispersion Impeller Dispersing Machine Blade Paddle Impeller Stainless Steel 8cm Disc with 8X300mm Rod (3.15″disc with 0.31″X11.8″Rod)

1.【Material】▨ The dispersion disc is made of 304 stainless steel, with good processability and strong toughness, suitable for use in humid environments, strong corrosion resistance, and not easy to rust..
2.【Application】▨ The dispersing disc is widely used in coatings, pigments, dyestuffs, ink, adhesives, medicine, daily chemicals,etc. It is a regular accessory for mechanical equipment such as dispersing machine, grinder, pulverizer,mixer, emulsifier and so on..
3.【Note】▨ There are two parts to be checked before use: one is to check whether the dispersing disc teeth are deformed, about to break off or missing.
the other is to check whether the disc body is deformed. Take care to adopt corresponding cleaning methods after use..
4.【Features】▨ The dispersion plate is durable, lightweight and convenient, easy to replace, easy to clean, and easy to operate..
5.【Guidance】▨ 8cm disc with 8X300mm rod（3.15″disc with 0.31″X11.8″rod）,if you need other sizes , please feel free to contact us..

Check Stock

YUCHENGTECH Dispersing Disc Dispersion Impeller Dispersing Machine Blade Paddle Impeller Stainless Steel 3cm Disc with 7X300mm Rod （1.18″disc with 0.27″X11.8″Rod）

1.【Material】▨ The dispersion disc is made of 304 stainless steel, with good processability and strong toughness, suitable for use in humid environments, strong corrosion resistance, and not easy to rust..
2.【Application】▨ The dispersing disc is widely used in coatings, pigments, dyestuffs, ink, adhesives, medicine, daily chemicals,etc. It is a regular accessory for mechanical equipment such as dispersing machine, grinder, pulverizer,mixer, emulsifier and so on..
3.【Note】▨ There are two parts to be checked before use: one is to check whether the dispersing disc teeth are deformed, about to break off or missing.
the other is to check whether the disc body is deformed. Take care to adopt corresponding cleaning methods after use..
4.【Features】▨ The dispersion plate is durable, lightweight and convenient, easy to replace, easy to clean, and easy to operate..
5.【Guidance】▨ 3cm disc with 7X300mm rod（1.18″disc with 0.27″X11.8″rod）, if you need other sizes , please feel free to contact us..

Check Stock

YUCHENGTECH Dispersing Disc Dispersion Impeller Dispersing Machine Blade Paddle Impeller Stainless Steel 5cm Disc with 7X300mm Rod （1.96″disc with 0.27″X11.8″Rod）

1.【Material】▨ The dispersion disc is made of 304 stainless steel, with good processability and strong toughness, suitable for use in humid environments, strong corrosion resistance, and not easy to rust..
2.【Application】▨ The dispersing disc is widely used in coatings, pigments, dyestuffs, ink, adhesives, medicine, daily chemicals,etc. It is a regular accessory for mechanical equipment such as dispersing machine, grinder, pulverizer,mixer, emulsifier and so on..
3.【Note】▨ There are two parts to be checked before use: one is to check whether the dispersing disc teeth are deformed, about to break off or missing.
the other is to check whether the disc body is deformed. Take care to adopt corresponding cleaning methods after use..
4.【Features】▨ The dispersion plate is durable, lightweight and convenient, easy to replace, easy to clean, and easy to operate..
5.【Guidance】▨ 5cm disc with 7X300mm rod（1.96″disc with 0.27″X11.8″rod）, if you need other sizes , please feel free to contact us..

Check Stock

YUCHENGTECH Dispersing Disc Dispersion Impeller Dispersing Machine Blade Paddle Impeller Stainless Steel 6cm Disc with 8X300mm Rod (2.36″disc with 0.31″X11.8″Rod)

1.【Material】▨ The dispersion disc is made of 304 stainless steel, with good processability and strong toughness, suitable for use in humid environments, strong corrosion resistance, and not easy to rust..
2.【Application】▨ The dispersing disc is widely used in coatings, pigments, dyestuffs, ink, adhesives, medicine, daily chemicals,etc. It is a regular accessory for mechanical equipment such as dispersing machine, grinder, pulverizer,mixer, emulsifier and so on..
3.【Note】▨ There are two parts to be checked before use: one is to check whether the dispersing disc teeth are deformed, about to break off or missing.
the other is to check whether the disc body is deformed. Take care to adopt corresponding cleaning methods after use..
4.【Features】▨ The dispersion plate is durable, lightweight and convenient, easy to replace, easy to clean, and easy to operate..
5.【Guidance】▨ 6cm disc with 8X300mm rod（2.36″disc with 0.31″X11.8″rod）,if you need other sizes , please feel free to contact us..

Check Stock

Dry Humping Stage Monitors I Am An Indestructible Master

...r to weight ratio. Linear Class AB amplifier technology: high power, transparent sonic performance.
Internal switch-mode power supply for low distortion audio with superior transient response. State-of-the-art 1.75'' titanium diaphragm compression horn driver for crystal clear high frequency reproduction. Ultra-wide dispersion, large-format Elliptical wave guide horn. Custom Molded Steel Grill. Ergonomically shaped handle for easy carrying and setup. Aviation Grade Black Carpet.
Rubber Isolating Feet. Mic / Line level control. Built-In 3 band Equalizer allows you to control High, Mid, and Low frequencies to attain your preferred sound. 300Hz to 5KHz Feedback frequency filter. Adjustable feedback filter. Balanced ultra-low noise Mic / Line input via combo XLR & 1/4'' TRS jack. Balanced line output via combo XLR & 1/4'' TRS jack.

Check Stock

MXBAOHENG Handheld 50 Gallons Pneumatic Mixer Industrial Coating Ink Paint Mixer Air Agitator

{Feature}Powerful cylinder motor, high-strength metal material, can work continuously for a long time..
{Application}: It is suitable for the mixing of paints in mixed gas spraying, and it is also suitable for the mixing of other paints.
it is also suitable for the homogenization, dispersion, emulsification and other uses of industries such as chemical, food, pharmaceutical, cosmetics, etc., without sparks, explosion-proof, and high safety..
{Package included}: Each mixer comes with 2 blades, which makes the mixing more efficient..

Check Stock

COSTWAY 3-in-1 Stand Mixer, 800W 6-Speed Tilt-Head Food Mixer, 7 QT Upgraded Mixer w/ Whisk, Dough Hook, 2 Beaters and 304 Stainless Steel Bowl, Meat Grinder, Juice Blender, Sausage Stuffer, Red

HIGH QUALITY MATERIAL------On the one hand, the 7 quart mixing bowel is made of 304 stainless steel. Compared to normal stainless steel, 304 stainless steel has better high temperature and corrosion resistance. On the other hand, the main body of our electric mixer is made of ABS plastic, which offers you with long-term service..
HUMANIZED DESIGN------a. The motor will stop running once the head of our stand mixer is raised, which ensures safety. b. The design of the tilt-head is convenient to not only add ingredients, but also install or remove mixing bowl and attachments. c. 7 qt capacity bowl is enough to mix dough for 9 dozen cookies or 4 loaves of bread in a single batch. Besides, the handle is more convenient to hold..

Check Stock

Mini Vortex Mixer, Briidea Lab Vortex Shaker 3000rpm Quick Mixing, Touch Function Portable for Test Tubes and Centrifuge Tubes, Tattoo Ink, Nail Polish, Eyelash Adhesives, Acylic Paints

... as soon as the tube is taken away. The low activation force allow repetitive mixing operation. The smooth exterior and compact size make this vortex shaker easy to clean and store..
LABORATORY QUALITY: The lab vortex mixer is built to last. Durable brushless DC motor, rubber head and high quality chemical-resistant plastic body are the perfect combination. The suction cups base ensures the mixer can stand firmly without moving when mixing, which is more stable..
STRONG MIXING CAPACITY: Suitable for small containers up to 50mL (approx. 1.7 fluid ounces), such as tubes, centrifuge tubes, Eppendorf beakers etc..
MIX WHAT YOU WANT: The vortex paint mixer can undertake any liquid mixing task. Perfect for mixing tattoo ink, nail polish, paint, UV gel, eyelash glue, glue, pigments and other tough liquids. Widely used in laboratory, nail salons, beauty salons, artist studios, tattoo shops, enterprise, schools and homes..

Check Stock