ReviewsRubber Release Agent

Dynamic Discs Classic Agent Disc Golf Putter | PROTOYPE | Special Edition Limited Run Slightly Overstable Beadless Frisbee (White)

  • NEW RELEASE - The Agent specializes in consistent flights and accurate putts. Your competition will be in danger when the Agent appears on the course. With a beadless profile and slightly overstable flight, it's no secret you can depend on the Agent to perform..
  • FLIGHT RATINGS - The Agent has a Speed: 2 Glide: 3 Turn: 0 Fade: 1.
  • MAKE MORE PUTTS - The Agent wants to go in the basket. It has a rounded bottom without a bead so it will fly great out of your hand. Ready to switch putters? The agent is the perfect balance between the Judge and Warden for people who want the best feeling putter around..
  • PROTOTYPE - Now is your chance to buy the newest putter on the market! These PDGA approved discs are the prototypes straight from the factory. Now is your only chance to get this special run and special stamp of this great putter!.
  • ABOUT CLASSIC - Classic plastic is the perfect blend of tackiness and firmness for players looking for a stiff golf disc..
Check Stock

Specialty Resin & Chemical Cast-A-Mold Platinum 1-Gallon Kit | Silicone Mold Making Kit | Food Grade Platinum-Cured Silicone Rubber | 2-Part DIY Set for Casting Epoxy and Polyurethane Resin

  • Easy way to get started learning how to make molds and castings.
  • Designed for use with small FLAT or 2-Dimensional original models.
  • Comes with: Trial Kit OOMOO tin-cure Molding Rubber, Trial Kit Smooth-Cast 300 Casting Resin, 2 oz. Superseal, Ease Release 205 Release Agent, How-To....
  • Will teach you step-by-step how to make a pourable mold and casting.
Check Stock

PARTALL Film #10 Polyvinyl Alcohol (PVA) Gallon

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) mold release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against mold hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over mold release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PVA - PARTALL Film #10 Polyvinyl Alcohol (PVA) Pint

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PARTALL Film #10 Polyvinyl Alcohol (PVA) Half Gallon

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against surface hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PVA - PARTALL ® Film #10 Polyvinyl Alcohol (PVA) Half Pint

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned surfaces can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble.
  • Protects against hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure).
Check Stock

Stronghold Games Amul

  • In city of Spies: double Agent, an expansion to the 2016 release, city of Spies: estoril 1942, new Spies arrive in Town and with new abilities.
  • Besides estoril, players will also fight in lisbon, where they will find new ways to create the best Network of Spies.
  • City of Spies: double Agent expansion will offer an option for a 5th player.
Check Stock

DGZZI Table Tennis Pat Cleaner 2PCS Ping Pong Paddle Edge Tape Rubber Care Sponge Racket Protective Film Brush Set

  • The table tennis racket cleaning sponge is made of high-grade rubber sponge, the foam is uniform and dense, does not lose the sponge residue, and can be used for a long time..
  • Effectively clean the rubber, can extend the service life of the table tennis bat, super absorbent and super soft. When cleaning rubber, please use water or detergent liquid..
  • High-grade rubber cotton, professional sponge, high water absorption, effective cleaning rubber debris, made of blue sponge, soft and delicate sponge, professional quality. It becomes soft when exposed to water, and becomes hard when dried..
  • The Rubber Sponge is softer and thicker than ordinary washing sponge, has better scrubbing effect, longer service life and higher purity. Effectively clean the rubber surface of the table tennis cover to effectively prevent static electricity..
  • The Rubber Sponge is recommended to use it with rubber cleaning agent. If there is no cleaning agent, it can be wiped with clean water. Do not wipe dry to avoid damage to the rubber and sponge and affect the service life..
Check Stock

Wallfire 2 Pieces Ashtray Epoxy Mould DIY Silicone Resin Kits Triangle Ashtray Mold with Lid for Succulent Planter Bowl Ashtray Candle Soap Pen Holder

  • High- quality material--- The resin mold kit is made of environmentally friendly liquid silicone, which has high transparency and better mirror effect. The liquid silicone mold has a long service life and is not easy to deform.
  • Easy to release--- The interior is smooth and shiny, which reduces the need for trimming and polishing. After your project is fully cured, it is easy to pull out the completed resin project, and then you can use a release agent.
  • Reusable and environmentally friendly silicone mold--- The smooth and silicone ashtray resin mold is made of high- quality silicone and can be cast indefinitely. It is an ideal material for making resin molds, because it can be used as a natural mold release agent, which is everyones Great choice.
  • Mold size --- Ashtray: 14. 95* 15cm/ 5. 88* 5. 90in.
  • Lid: 11. 7* 12cm/ 4. 60* 4. 72in, the size is appropriate.
  • About us--- Thank you for your choice. If you encounter any problems during the purchase process, please communicate with our customer service in time. We will solve your doubts at any time. I hope you can have a pleasant shopping experience, thank you..
Check Stock

ColorBond (215) Adhesion Promoter Primer - 12 oz.

  • HIGH-PERFORMANCE BONDING AGENT - Liquid Rubber Multi-Purpose Primer improves adhesion to a variety of substrates, especially to wood and concrete.
  • USE ON - Numerous surfaces including concrete, wood, high-density polyethylene, and more! Our Multi-Purpose Primer is freeze/thaw stable as well as fast drying.
  • EASY TO APPLY - Apply using a conventional brush or roller equipment.
  • may also be sprayed using a delivery system and nozzles appropriate for this material. Apply 1-2 coats depending on the surface and apply top coat within 24 hours when tack free.
  • ENVIRONMENTALLY FRIENDLY - Liquid Rubber Multi-Purpose Primer is water based and non-toxic, containing no solvents and low VOC's. Safe for humans and pets alike.
  • APPLICATION - For best results, apply to a dry surface that is free of dirt, debris, oil, and grease. Do not apply before the onset of rain or if dew is forecast.
Check Stock

Yakitoko Plastic Restorer for Cars, Nano Plastic Refreshing Coating Kit, Waterproof Automotive Plastic Parts Refurbish Agent

  • ... plastic restorer not only makes your dull plastics and trims shine, but also protects the plastics and trims on your new car! By using our plastic refurbishing agent restorers, you can prevent premature wear and fading caused by road grime!.
  • 【Protect Car Paint】: Our special formula will never damage or dry your rubber, trim, plastic or damage any paint it may come in contact with! Safe to use on all colors of plastic and rubber!.
Check Stock