ReviewsRubber Sealing Member

FEL-PRO VS 50419 R Valve Cover Gasket Set

  • DESIGNED FOR IMPERFECT SEALING SURFACES -- Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces.
  • ENGINEERED TO PERFORM -- Proprietary cork-rubber formulation.
  • SUPERIOR SEAL -- Highly conformable to accommodate for the imperfect sealing surfaces.
  • EVERY PART FOR THE REPAIR -- Fel-Pro gasket sets include every part needed for the repair unless otherwise noted.
  • REAL-WORLD TESTED -- Parts are tested on-vehicle and validated to ensure optimal performance on the road.
  • Made with PermaDry molded rubber gasket material.
Check Stock

FEL-PRO VS 50504 R-1 Valve Cover Gasket Set

  • DESIGNED FOR IMPERFECT SEALING SURFACES -- Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces.
  • STRONG AND DURABLE -- Features molded rubber over an aluminized steel carrier which resists high heat and coolants.
  • SUPERIOR SEAL -- Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal.
  • EASIER TO INSTALL -- Locating tabs assure proper alignment and easier installation.
  • PREVENTS OVERTIGHTENING -- Torque limiters help eliminate overtightening and gasket splitting and extruding.
  • EVERY PART FOR THE REPAIR -- Fel-Pro gasket sets include every part needed for the repair unless otherwise noted.
Check Stock

15FT Butyl Rope Butyl Rubber Sealant Tape for RV Car Headlamps Window Door Windshield, Black Waterproof Butyl Seal Tape- 3/8" X 15'(4.5m)

  • 【HIGH QUALITY】Premium Synthetic butyl rubber, good flexibility and resistance to compression deformation. Rubber Sealant is a non-drying,non-hardening synthetic rubber based butyl rubber sealant. It will remain permanently sealing and waterproofing,high viscosity,elasticity and tightness.
  • 【APPLICATION】Available for sealing or resealing car headlights, windshield, headlamp, air conditioners,door waterproof film,decorative parts,bus body and frame. use anywhere that a watertight seal is needed..
  • 【SIZE】Length : Butyl sealant Approx 15'(4.5m) ,Thickness: Approx 3/8", long enough for re-sealing about 2 or 4 headlight assemblies,easy to cut to fit for your need..
  • 【FUCTION】Rubber Sealant have super strong waterproof. Reduce the noise and wind when you drive your car at high speed..
  • 【EASY TO USE】Simply release the sealant from paper and press it sufficiently around the pinch weld.And after removing headlamp cover, the weld areas should be dry,clean,free from dust,oil and grease.Butyl rope prevent leakage,corrosion,deformation,vibration, weather and aging.....
Check Stock

PandaHall Elite Wax Seal Stamp Vintage Retro Brass Head Wooden Handle Alphabet Letter R Initial Wax Classic Sealing Stamp for Envelopes Invitations Wine Packages Wedding Greeting Cards

  • Sealing stamps material: sealing stamps are made of brass, handle is made of rosewood, smooth and shiny, not easy to wear, you can use then for very long time.
  • Application: Sealing stamps are suitable for embellishment and decorating of envelope, invitations, wine package, perfume bottles, wine bottle, scrapbooks, parcels, gift packing, greeting cards etc. The perfect party Christmas invitations gift for a friend or family member..
  • Removable Stamp: Easy to change and install, slightly rotate the brass head is ok. you can use it to tie in with all kinds of 25mm diameter stamps that with different patterns freely to make any themes you want..
  • Easy to Use: Cutting some seal wax blocks and melting them in the spoon with the tea candle, pour melted wax in the desired place and stamp onto the wax in several seconds, a perfect seal..
  • Wax seal stamps size: wooden handle height is approx. 75 mm/ 2.95 inch, seals diameter is approx. 2.5 cm/ 0.98 inch, whole height is approx. 9 cm/ 3.54 inch.
Check Stock

Rubber Weatherstrip Seal Kit Set Front Sliding Cargo Door for GM Van

  • 【Material】Automotive weather stripping is durable rubber and self-Adhesive, non-toxic, thick and flexible, plyable to hold up to compression..
  • 【Durable】Car seal strip has good flexibility and compressive deformation resistance, no cracks or deformation in long-term use. And strong adhesive backing, stick firmly and non-deguming, tear off the rubber weatherstrip will not leave sticky residue..
  • 【Increased Airtightness】The hood sealing strip has good elasticity, which can better fit the gap of your car and improve the sealing degree of the car. Prevent dust and rain from entering the hood and damaging parts..
  • 【Function Application】The car hood rubber seal can effectively optimize the heat dissipation airflow in the engine cabin, reduce fuel consumption and keep the engine clean, greatly reducing the dust into the car. The sealing strip can effectively improve the insulation effect and thus reduce fuel consumption..
  • 【Package include】Total 13.1 feet. The perfect design makes it fit the hood better, it can be cut freely, and easy to install, high strength adhesive and seal.
Check Stock

ACDelco Professional 15-2559GM Air Conditioning System Seal Kit

  • O-Rings feature HNBR rubber and sealing washers contain nitrile rubber to help optimize sealing and product longevity.
  • Professional, premium aftermarket replacement.
Check Stock

ACDelco Professional 15-2548GM Air Conditioning System Seal Kit

  • O-Rings feature HNBR rubber and sealing washers contain nitrile rubber to help optimize sealing and product longevity.
  • Professional, premium aftermarket replacement.
  • Provides the performance and dependability you expect from ACDelco.
Check Stock

ZXMOTO 13Ft Headlight Sealant Retrofit Refit Butyl Rubber Glue Reseal for Car Headlamps Window Door Windshield (1 Piece)

  • Rubber Sealant is use for the side of car doors column A/B,it can effectively keeps out the wind, prevents the water leakage and lower the noise outside the car..
  • Recommended for re-sealing headlights after a retrofit or for installation between the glass and metal/llastic areas of automotive headlights/windscreen.It will remain permanently sealing and waterproofing..
  • Maretial:Synthetic Butyl Rubber.Waterproof..
  • Length: Approx. 4m (13ft). (enough for re-sealing about two – four headlight assemblies.).
Check Stock

Maintain Your Sany 75 Excavator with Heavy Equipment Components - Excavator Joystick Handle Rubber Sealing Push Rod for Maintenance and Repair

  • Heavy equipment components: These joystick handles are designed as replacement accessories for the Sany 75 excavator model, ensuring a perfect fit and compatibility.
  • Rubber sealing push rod: With a rubber sealing design that provides high temperature resistance, good sealing, and no leakage, these joystick handles have enhanced reliability and longevity.
  • Excavator maintenance and repair: Made from durable materials such as brass, alloy steel, and rubber, these joystick handles can withstand heavy use and frequent maintenance and repairs.
  • Sany 75 excavator parts: This package includes four joystick handles, giving you peace of mind knowing that you have spare parts on hand in of damage or wear.
  • After-Sales Service: Our team is committed to providing top-notch customer service. Should you have any questions or concerns about your order, simply reach out to us through email and we'll respond promptly..
Check Stock

TiToeKi O-Gasket Rubber 5-Pack Blender Parts O-Ring Gasket Seal Compatible with Osterizer and Oster Blender Models

  • Note: Our blender sealing O-ring gaskets are not compatible with Oster Pro 1200, In2uitive blenders, please do check the model before purchasing..
  • About Package: 5 pack of blender sealing ring gaskets compatible with Oster and Osterizer blender models..
  • About Product: Our blender sealing O-ring gaskets are not only made of durable rubber material, but also has good elasticity, which can extend the life of the blender..
  • About Sealing: Our O-gasket rubber material is soft and durable enough to achieve a good seal, reusable material for fruit juice making, so you don't need to worry about leakage..
  • About Compatibility: O-ring gasket Seal part compatible with Oster kitchen centers and Osterizer blender. Please confirm the size before buying, please refer to the size chart in the picture for the specific size..
Check Stock

20 oz Replacement Rubber Lid Seals O Shaped Resealable Lid Gaskets for 10 12 16 and 20 Ounce Insulated Stainless Steel Tumblers 6

  • Replacement rubber O-ring: these lid seals are suitable for 10, 12, 16 and 20 ounce insulated stainless steel tumblers, compatible with RTIC Atlin....
  • Quality material: made of quality rubber without BPA, the rubber lid seals are leak-proof and heat insulated, containing no odor, serviceable enough....
  • Nice sealing effect: these replacement rubber lid seals are designed to create a good sealing effect between the lid and the tumbler, keeping your....
  • Sufficient quantity: you will receive 6 pieces of replacement rubber lid seals, enough quantity for your daily needs and replacements, or you can....
  • Easy to replace: just use your fingers to roll off the rubber ring that needs to be replaced and then slide on the one that can replace, easy to....
Check Stock