ReviewsRubber Sealing Ring

Engine Valve Cover Gasket Seal 12341-PR3-000 Engine Valve Cover Gasket Set for Honda DOHC VTEC B-Series B16 B17 B18 12341PR3000

【Compatibility】: This product is compatible with for Acura Integra GSR/Type R 92-01, for Honda Civic Si 99-00/for Honda Del Sol (DOHC VTEC) 94-97.Reference part number is 12341-PR3-000, 12341PR3000..
【ACM material】: The sealing ring is made of ACM rubber, which has good heat resistance, aging resistance and oil resistance, and provides better protection for your automotive valve room..
【Leakproof protection】: The sealing ring can directly replace the damaged valve gasket to prevent oil leakage, air leakage and protect the air intake of the vehicle. High precision, good sealing performance and long service life..
【Easy to install】: The sealing ring is easy to install and can be used after installation, which perfectly matches the original car. Original standard, perfect replacement for old or damaged parts..
【After-sales service】: If you have any questions about this product, please contact us, our professional after-sales team will answer your questions within 24 hours..

Check Stock

Elesa 54911 Pressurized Breather Cap, Technopolymer, Orange Cover, Black Threaded Connector, 2.76\ Diameter, 2.48\ Length, G 3/4 Threaded Connector Size

Polyamide based (PA) technopolymer. Cover: RAL 2004 orange, semi-matte finish, with graphic symbol "valve".
Threaded connector: black color, semi-matte finish.
Technopolymer overpressure valve with NBR synthetic rubber O-ring and stainless steel spring.
Suction disk: Technopolymer sealing disk with NBR synthetic rubber O-ring and stainless steel spring.

Check Stock

SUNGATOR Angle Stop Add-A-Tee Valve, 3/8

Lead Free Brass: Heath and environment friendly material. Lead free brass for both potable and non-potable water. 3/8" compression inlet x 3/8" compression outlet x 3/8" compression outlet..
Wildely Used: Angle stop add-a-tee for adding an outlet on a angle stop valve for a refrigerator, ice maker, water filtration system, dishwasher, second faucet, etc..
Durable: Brass for corrosion resistance, high temperature ductility and low magnetic permeability, have a longer using life than iron and iron galvanized products..
Better Sealing: Built-in rubber ring for better sealing, a sealing tape included for further improving sealing performance by using on the male thread end..
Package Includes: 3/8 Inch Lead Free Add-A-Tee Valve (2 pcs).

Check Stock

uxcell Nitrile Rubber O-Rings 44mm OD 40mm ID 2mm Width, Metric Buna-N Sealing Gasket, Pack of 10

[Size] - 4mm(0.16 Inch) OD, 1mm(0.04 Inch) ID, 1.5mm(0.06 Inch) Cross-Section Diameter.
[Advantage] - Durable fluorine rubber with resistance to heat, oil, aging, abrasion, ozone, fuel and chemical.
[Feature] - O-ring round in cross-section to provide a seal between cylindrical overlapping surfaces. They are commonly seen in engines, flanges, valves and so on.
[Application] - Fluorine rubber O-ring provides sealing and prevents leaking for a wide range of applications such as plumbing, machinery, hydraulic and pneumatic repairs, etc.
[NOTE] - Please confirm the required size and material before purchase, and install it in the right place.

Check Stock

Replacement for Nutribullet Gasket Rubber Seal Ring with Lip, Rubber Ring Seal Rings Gaskets Compatible with Nutribullet 600/900 Series Blender (Pack of 4)

> [COMPATIBLE]: Compatible with Nutribullet 600/900 Series. NOT compatible with any Magic Bullet, Nutribullet Lean, Nutri Bullet RX, Baby bullet, NutriBullet Model Nr. NB 101B (Model NB 1018)..
>[BENEFIT TO BLENDER]: Made of food-grade silicone rubber, Better protect the mixer and seal it, replace the old seal and keep the lid clean and watertight. It can be used for a long time. The rubber sealing O-Ring gasket is a necessary blender accessory in case of emergency..
> [APPLICATION]: A common replacement part, this seal sits between the top of the blade and the bottom of the jar. Will solve the problem of water leakage in the mixer and save the cost of buying a new mixer..
> [PREMIUM QUALITY]: Strict quality control standards to Build and test. Not OEM but quality equals or exceeds OEM standard. Easy installation and direct replacement of original parts. Type D is reinforced with metal inserts for more durable plastic. Save much money off dealer prices..
> [GUARANTEE AND SERVICE]: The rubber sealing gasket O-ring replacement part completed with a One-year Warranty. Save much money off dealer prices. If the drive clutch with O-ring once failed on your blender, simply contact us for a replacement or refund..

Check Stock

Tintvent Rubber Edge Trim Black, U Channel Rubber Seal Strip with Self-Adhesive Tape, Metal Edge Protector Fit for 1/4\

【MATERIAL】The rubber edge trim with high-quality EPDM rubber materials, extremely hard wearing, excellent protection against heat, extreme weather damage, and corrosion. High temperature resistance & cold resistance, prevent ultraviolet light..
【FUNCTION】The u channel edge trim adopts self-adhesive design to better prevent falling off, can be used for decorative trimming or protecting sharp edges and prevent scratch..
【EASY TO INSTALL】U shaped and internal self-adhesive design, the push-in interior sealing ring and tearing the red film can realize quick installation and form the final edge sealing ring. (No adhesion promoter is required, direct installation)..
【APPLICATION】The u channel rubber seal strip can used to the edges for hatches, lockers, panels, sharp metal, table, board, car door, glass, steel plate etc..
【SERVICE】Please check the size you need before order. IF you have any questions about the edge trim guards, please feel free contact us via Amazon mail..

Check Stock

AIEVE Blender Gasket for Oster, 12 Pack Blender Sealing Ring Gaskets Blender Rubber Ring O-ring Gasket Seal O-Gasket Rubber Gasket for Osterizer and Oster Blender Replacement Parts

Compatible With: Our Blender Gasket for Oster is suitable for Oster blender parts and Osterizer blender replacement parts, but not compatible with Oster Pro 1200 and In2uitive blenders.
Premium Quality: The O-ring Gasket Seal is made of elastic rubber material, with good elasticity and wear resistance, can extend the service life of the mixer, stable and durable..
Easy to use: Use your hands or tools to remove the old seal ring and replace it with a new one. (Tip: You can remove the blade first and install it without worrying about being injured by the blade.).
Good sealing: The rubber material used in Blender Sealing Ring can make the seal ring and the mixer mouth tightly fit, and it is not easy to cause air gaps due to wear. You no longer need to worry about the leakage of the original seal ring due to rapid wear and tear..
You will receive a very good Blender Gasket replacement kit for Osterizer and Oster Models with 12 seals inside, which will allow you to use it for a long time..

Check Stock

joystar BLENDER CUTTING ASSEMBLY replacement parts extractor blade SPB-456-2-MP for Cuisinart Spb-7 Cbt-500 Sb5600 Cb600 etc Cutting Assembly Parts(white, 1)

COMPATIBLE WITH: Replacement cutter blade assembly fits Cuisinart blender models BFP-10, BFP-10CH, BFP-703, CB-3, CB-5, CB-6, CB-7, CB-8, CB-9, FPB-5, FPB-5C, FPB-5PC, SB-5600, SPB-10, SPB-10CH, SPB-3, SPB-5, SPB-6, SPB-7, SPB-7BCH, SPB-7CH.
GREAT FUNCTIONS: Cuisinart blender replacement parts and accessories, fits most cuisinart juice mixer, replacement dull cutter blender blade after much blending work.
Rubber gasket replaces with good sealing at the bottom of this blade can be tight fit, no leak..
MAIN FEATURES: Black Stainless steel metal blade with coupling attached, sharply constructed.
Includes Cuisinart Rubber Gasket Sealing Ring. This blender cutting blade is black, however it can replace the white cutting blade on these models..
PACKAGE INCLUDES：1 cutter blade assembly and 1 gasket sealing ring.
PLEASE NOTE: Non original products, Any reference to brand or model numbers is intended for identification purposes only. This product does not include any warranty from the manufacturer. This blade should be hand-washed after use..

Check Stock

Ford F250/F350 Superduty Dana Super 60 2005-14 Front Axle Seal and U Joint Kit

Tight seal: The sealing performance of the handshake valve mainly relies on the sealing gasket, but the gasket will be worn and aged, and needs to be replaced in time to ensure air tightness. Mellbree gladhand seals made of thick rubber, it is not easy to tear, and it fits perfectly with the gladhand, providing a tight and seamless fit. Tightly sealed for best long-lasting and safe use..
Material: The rubber seal is perfectly designed, sturdy and durable, is used for the air connection of tractor and trailer, with strong corrosion resistance, high strength and strong sealing. It feels smooth and soft, light and flexible, and bendable. Small and portable..
Easy to use: Simply remove the worn seal ring and insert the bottom of the new seal ring into the object you want. Curved edges and pre-powdered for smmooth and easy in and out application. Easy to install, no tools required, also suitable for beginners..
Compatible: Each seal is perfect for all standard glad hands. Fits almost all semi truck glad hand, like Tectran 10111, Haldex 10028, Sloan Cross 441714, Phillips 12-012, Velvac 035007 and etc..
Package contains: 16 pieces are sufficient quantity, which can meet all kinds of usage and replacement needs in your daily life. No need to go to the hardware ....

Check Stock

Silicone Sealing Ring and Universal Replacement Floater and Sealer for 5 & 6 Quart Instant Pot,Such as XL, IP-DUO60, IP-LUX60, IP-DUO50 and IP-LUX50

✅ Simple to clean after each use with soap and water or in the dishwasher to eliminate odors, spices, and food stuck on the gasket rings and prolong the life of sealing rings..
✅ Floater and sealer and Gasket are part of the lid of Power Pressure Cooker, and are essential for pressure cooker to work ! Sealing Ring Replace every 18-24 months or when deformation is present in your old sealing ring ..
✅ Package Content: Set of 7 (2x floater and 3x sealer + 2x rubber gasket).
✅ Silicone Sealing Ring Inside diameter 8.7″, outside diameter 9.5″. Fits models IP-DUO60 (DUO60), IP-LUX60 (LUX60), IP-DUO50 (DUO50), IP-LUX50 (LUX50),Pressure Cooker XL, IP-CSG60 (CSG60) and IP-CSG50 , Not recommended for other brands of pressure cookers – Made exclusively for use in the IP..
✅ Replacement seals are made from 100% Safe Food-Grade durable Silicone without any BPA,Odor Resistant..

Check Stock

A/C Seals Set, 270pcs 18 Sizes Car Air Conditioning Compressor Seals Assortment Kit Green O‑Ring for Water Faucet

Fit for : A/C Seals Set Widely used in automotive, water faucet, hydraulic and pneumatic, critical sealing, industrial equipment, appliances..
Outstanding Performance : Nitrile 70 durometer material with no pollution, abnormall smell, environmentally friendly.The size can be found in the color card attached in the box, greatly save your time..
Product Detail : Car Air Conditioning Rubber O-Ring Kit Packing in one plastic box that is good for pick, and extremely convenient to carry around. 18 popular sizes and 270pcs green o‑ring assortment, can be used for different place..
Easy to Install : A/C Compressor Seals is easy to use and you can replace the old or broken one directly. Car Air Conditioning Rubber O-Ring Kit Package included the 270 x A/C Seals..
Purchase Notice : We value the shopping experiences and satisfaction of each customer, so we provide technical support. If the product install or quality have any problem, please contact us in time.We will solve it as soon as possible..

Check Stock