ReviewsRubber Sponge Hoses

4FT Stainless Steel Washer Hoses with 90 Degree Elbows by Beaquicy - 2 Pack No-Lead Burst Proof Hot & Cold Water Connection Inlet Washer Supply Lines

...ed with 90-degree elbows on one end for an easy and smooth installation in tight spaces. braided washer machine hoses fit for almost all washers..
✅【100% Brand New and High Quality】---The washing machine hoses 4ft 2 pack are made with Lead free, Pvc core, Extra-thick Rubber washer, 100% pure rubber internal hose, ultra-high tensile strength braided stainless steel hoses, which can preventing water leaks kinking crimping and corrosion.Washing machine hot and cold water hoses can be easily connected to the ordinary household water supply line in the laundry room and solve the housework of laundry..
✅【Easy to Install】---Unplug the washing machine and turn off the water supply before making any repairs.First remove the old washer water lines from the water supply faucet, and screw the new stainless steel washing machine hose to the water supply faucet.Then find the hot and cold water inlets on the washer, and hand-tighten the other end of the new water inlet hose to the corresponding water inlet of the washer..

Check Stock

Sunsong 3401230 Power Steering Pressure Hose Assembly (Honda)

Pressure Hoses exceed original equipment performance standards (SAE J188) with a max working pressure of 1,500 psi a burst pressure rating of 8,700 psi and a tensile strength of 1,600 lb. This provides exceptional durability and long life.
All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime.
Each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition.
Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose.
Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements.

Check Stock

Sunsong 3402221 Power Steering Pressure Line Hose Assembly

Pressure Hoses exceed original equipment performance standards (SAE J2050) with a max working pressure of 1,500 psi a burst pressure rating of 8,700 psi and a tensile strength of 1,600 lb. This provides exceptional durability and long life.
All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime.
Each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition.
Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose.
Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements.

Check Stock

Sunsong 3401298 Power Steering Pressure Line Hose Assembly

Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new Hose.
Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements.

Check Stock

HJ Garden 6pcs 2 inch(50mm) Rubber Cushioned Cable Clamp 304 Stainless Steel Hose Clamp/Metal Clamp/Tube Holder Fastener for Tube/Pipe or Wire Cord Installation

Package: Pack of 6pcs 2 inch (50mm) Stainless Steel Rubber Cushioned Cable Clamp, fit for the connection of wire, pipe, hoses or cables of (outer diameter) 2 inch panels or frames applications..
Made of high Quality 304 Stainless Steel, combined with insulated EPDM rubber pad, corrosion and rust resistant, water-proof, can be used repeatedly, long service life..
Fine workmanship, right side up rivet sheet, smooth, round without burrs, screw hole diameter is 1/4 inch (6.5mm)..
Rubber gasket can slow down the vibration and turbulence, reduce the abrasion of cables and hoses, fit closely with hose and cable, to make sure the clamp firmly fixed in place..
Convenient to use, easy to twist, bend and operate, suitable for installing and repairing various types of cable pipes, widely used in hoses, steel pipes, ships, windshields, automobiles, UTV and home etc..

Check Stock

HJ Garden 6pcs 1 inch Rubber Cushioned Cable Clamp 304 Stainless Steel Hose Clamp /Metal Clamp/Tube Holder Fastener for Tube/Pipe or Wire Cord Installation

Package: Pack of 6pcs 1-inch (25mm) Stainless Steel Rubber Cushioned Cable Clamp, fit for the connection of wire, pipe, hoses or cables of (outer diameter) 1 inch panels or frames applications..
Made of high Quality 304 Stainless Steel, combined with insulated EPDM rubber pad, anti-corrosion, anti-rust, water-proof, can be used repeatedly, long service life..
Fine workmanship, right side up rivet sheet, smooth, round without burrs, screw hole diameter is 1/4 inch (6.5mm), can be fastened with M6 screws..
Rubber gasket can slow down the vibration and turbulence, reduce the abrasion of cables and hoses, fit closely with hose and cable, to make sure the clamp firmly fixed in place..
Convenient to use, easy to twist, bend and operate, suitable for installing and repairing various types of cable pipes, widely used in hoses, steel pipes, ships, windshields, automobiles, UTV and home etc..

Check Stock

MOTZU 6 Pieces Table Tennis Rubber Cleaning Sponge, Ping Pong Paddle Cleaner, Racket Rubber Care

QUALIFIED RUBBER MAKING: Ping Pong paddle cleaner made of high grade rubber cleaning sponge, foam uniform fine, not off the sponge residue..
EFFECTIVENESS: Effectively clean rubber, prolong the service life of Ping Pong racket. Super water absorption, super soft in water..
DETAILED OPERATION: When cleaning rubber, use with water or detergent liquid..
USE IT WHEN IT WET: When the sponge is dry, do not wipe off the rubber, otherwise it will damage the rubber and the sponge..
WATER ABSORPTION: It's super water adsorptive, and super soft as it gets wet. But it will turn hard when it's dry..

Check Stock

Metalwork 2\ Tri Clamp to 1\ Hose ID Barbed Adapter SUS304 Sanitary Hose Pipe Fitting

Adapter for connecting pipes or fittings of different types.
Barbed fitting for a tight seal on hoses when used with a hose clamp (not included).
For use with rubber hoses: Barb: 1" Barb For Rubber, Plastic, TPU, or other hose.
Fits: 1.5" Tri Clamp / Clover / Sanitary Fitting.

Check Stock

WeldingCity 150 Amp Power Cable Hose 57Y03R 25-ft Rubber 1-pcs Style for Air-Cooled TIG Welding Torch 9/17 in Lincoln Miller ESAB Weldcraft CK Everlast AHP

Premium quality power cable hose for air-cooled and water-cooled TIG welding torch 9, 17, 18, 20, 25 and 26 series..
For air-cooled torches 9 and 17 series: standard Weldcraft style one-piece type rubber-jacketed power cable hoses 57Y01R (12.5-ft) and 57Y03R (25-ft....
For air-cooled torches 26 series: standard Weldcraft style one-piece type rubber-jacketed power cable hoses 46V28R (12.5-ft) and 46V30R (25-ft and....
For water-cooled torches 20 series: standard Weldcraft style power cable hoses (rubber-jacketed with fabric sleeve) 45V03R (12.5-ft) and 45V04R....
Compatible with most TIG welders from Lincoln, Miller, ESAB, Everlast, Eastwood, AHP, etc. US-based welding and hardware supplier. Strong technical....

Check Stock

Prier C-144D12 Frost Free Anti-Siphon Outdoor Wall Hydrant, 12-Inch , Green

... splitter to the spigot easily with the wide black grip. No wrench or pliers needed..
SOLID BRASS FOR LONG USE WITHOUT LEAKAGE OR CORROSION - Heavy-duty and eco-friendly solid brass construction make the hose connector support up to 0.8MPa pressure without leakage and last from season to season without rust. Extra 6 rubber washers included to prevent the water hose splitter from leaking..
SPLIT 1 SPIGOT INTO 2 OUTLETS AND MORE - Run 2 hoses from the same spigot with 2 way heavy duty hose splitter, and you can even connect more hoses to your backyard sink, drip irrigation, sprinkler timer system, hose end tap timer with more faucet splitter. Made for home, garden and backyard use..
EASY-TO-TURN INDIVIDUAL VALVES & COMFORTABLE GRIP - Covered with thermoplastic rubber for easy grip and operation, the valves on the brass hose y splitter allow you to control the flow separately and easily without going back and forth to the source..
EFFICIENT AFTER SALE SERVICE- With IPOW Hose Splitter, easily taking care of plants, showering pets, washing car, cleaning house and more situations without switching hoses frequently. This hose spigot splitter enjoys a hassle-free customer service for any issue. Now move your finger and click "Add to Cart"!.

Check Stock

HJ Garden 12pcs 1 inch Rubber Cushioned Cable Clamp 304 Stainless Steel Buffer and Insulated Hose Clamp / R Shape Metal Clamp/Tube Holder Fastener for Tube/Pipe or Wire Cord Installation

Package: Pack of 12pcs 1 inch R Shape Stainless Steel Rubber Cushioned Cable Clamp, fit for the connection of wire, pipe, hoses or cables of (outer diameter) 1 inch panels or frames applications..
Made of high Quality 304 Stainless Steel, combined with insulated EPDM rubber pad, anti-corrosion, anti-rust, water-proof, can be used repeatedly, long service life..
Dimensions are marked on the steel tape for easy identification. Screw hole diameter is 1/4 inch (6.5mm), can be fastened with M6 screws..
Rubber gasket can slow down the vibration and turbulence, reduce the abrasion of cables and hoses, fit closely with hose and cable, to make sure the clamp firmly fixed in place..
Convenient to use, easy to twist, bend and operate, suitable for installing and repairing various types of cable pipes, widely used in hoses, steel pipes, ships, windshields, automobiles, UTV and home etc..

Check Stock