ReviewsRust Resistant Vise

ATLIN Vise Jaws 6' - Nylon, Non Marring Soft Jaws - Multi-Purpose Design for Woodworking, Jewelry Making, Plumbing

  • Non-marring – The vise jaws are made from a tough, but soft nylon. ATLIN 6in vise jaw pads will never mar or damage any of your project materials.
  • Easy Install – The soft jaws attach to your vise with 3 neodymium magnets.
  • Grooved Design – The 6 inch vise inserts feature a multi-purpose design which is ideal for, woodworking, jewelry making, threaded items, pipe, tubing, AN fittings.
  • Universal Compatibility – ATLIN vice jaws are compatible with any 6" milling vise, machine vise, drill press vise, bench vise.
  • Sizing & Specs – vise jaws measure 6" in length, Groove sizes: 3/8" @ 60° angle | vertical grooves: 1/4", 1/8", 1/16" 5/8" | horizontal groove: 1/4" – See second photo for further details.
Check Stock

FRICTIONWORKS Vise Jaws. Made In USA Pro Grade SH80 Hard Non-Scratch Polymer. 4 Inch Magnetic Bench Vise Covers. N48 Magnets. Fits 3 4 5 Inch Vises and Blocks

  • MADE IN USA – The bench vise jaw re-imagined from the ground up and built to a higher standard in the USA. New design innovations unique to Frictionworks non-marring soft jaws and a limited lifetime warranty..
  • SUPERIOR HOLD – 8 N48 spec Neodymium rare earth magnets force rated at 7 lbs each. We have tried other vice jaws and by far the strongest magnetic vise jaw pull force is with Frictionworks vise soft jaws. The only vice jaw covers with listed specs and the magnet strength you need to keep the protective jaws solidly on your table vise, jaw horse, drill press vise, swivel vise, vise clamps, or heavy duty bench vise..
  • EXCLUSIVE MAGNET RETENTION SYSTEM – The innovative internal bracket system in our soft jaws secures the magnets to the vise jaw caps with a stainless bolt and is then overmolded into the vice jaw pads, solving the biggest failure point of all soft jaw pads for metal vises leading to the toughest vise jaws made..
  • ENHANCED MATERIAL – Our proprietary fiber-reinforced polymer composite, shore hardness 80-D, provides an incredibly tough jaw face and works great and is recommended if you really want to clamp down hard. Use for gunsmithing, woodworking, jewelry working, , muzzle device installation, 80/20 Extrusions, plumbing, maching,....
Check Stock

Bora Folding Miter Saw Power Tool Stand with Wheels, Heavy Duty Contractor Grade Work Stand with Quick Attach Mounts, PM-7000i

  • Our ultimate portable miter saw work station – heavy duty construction and an array of features both contractors and DIY enthusiasts will love.
  • Fast and easy to fold, transport, and store.
  • Powder-coated, rust-resistant tubular steel and aluminum.
  • Weight capacity of 500 lbs. of material up to 16’ in length.
  • Includes work stand, tool mounts, and wheels.
Check Stock

Pin Vise for Resin Casting Molds, LEOBRO Steel Hand Drill, Resin Drill with 10 PCS Drill Bit, Precision Hand Drill Tools for Epoxy Resin Arts Crafts, Wood, Clay, DIY Resin Keychain Jewelry Making

  • ...oo hard surface, assist to make resin jewelry, resin keychain, necklace, erring, bracelet, pendant, model, sculpture, doll etc., make small precision job much easier. Note: Not fit for hard materials, like iron, steel, stone..
  • Sturdy & Exquisite Pin Vise: The precision resin drill is made of premium stainless steel, rust proof, sturdy and durable. Silver surface, polished handle, has even rough texture in 3 turning parts, looks pretty exquisite and can be rotated easily, fit for various DIY craft projects..
  • Precision Drill Bits Set: 10 sizes of steel drill bits, 0.8/1.0/1.2/1.5/1.8/2.0/2.2/2.5/2.8/3.0 mm, satisfy your different demands. Pointed end, good for drilling, and the holes drilled will be nice and clean. All 10pcs are packed in a plastic box which has 10 compartments and according marks, prevent loss, and easy to distinguish..
  • Tight 3 Jaw Chuck: The hand pin vise features 3 jaw chuck, clamp the drills bits in 0.8-3 mm, keep them upright and clip them tightly, great for smooth drilling work, and it’s easy to install and replace drill bits by rotating the vise head..
  • Use-friendly Drill Tool: Swivel hand drill for manual drilling, 12 cm/ 4. 72 inch long, right size for average hand, good for using. Simple operation, just half unscrew the vise hea....
Check Stock

Rockler Quick Release Woodworking Vise Clamps for Woodworking (12”) – Heavy-Duty Bench Vise Woodworking – Quick Wood Vise for Workbench – Easy to Install Workbench Vise with Hardwood Handle

  • Quick Release Vise: Sturdy guide rods keep the clamp faces neatly parallel, while the quick-release feature lets you slide the woodworking vise all the way open with an easy 1/4 turn..
  • Unique Design: This unique end vise for the workbench ensures smooth & efficient operation making this woodworking vise the most versatile and frequently used tool in your workshop..
  • Includes Hardwood Handle: The extra-wide 12" O.C. Guide rods provide maximum resistance to racking, while the extra-wide 17-1/2" woodworking bench vise handle plate delivers maximum stability to handle any project..
  • Widely Applied: The woodworking quick vise is suitable for home, woodworking studios, teaching equipment, and fixed for processing wood. This woodwork vise can also be used as a front vise.
  • Easy To Install: Our woodworking vise is easy to install with included instructions. Before installing carefully read the woodworking vise quick release PDF. (mounting hardware not included).
Check Stock

Rockler Quick Release Front Vise – 9” Woodworking Vise Dual Guide Rods Eliminate Racking – Easy to Operate Wood Vise for Home, Studios, Teaching Equipment - Bench Vise Woodworking

  • Woodworking Vise For Workbench: This powerful workbench wood vise is perfect for custom workbenches. Sturdy dual guide rods eliminate racking, while the quick-release feature lets you slide the vise all the way open or closed with an easy 1/4 turn..
  • Convenient Design: Slides open or closed in seconds! You can easily mount this workbench wood vise. The 9-inch guide bar's convenient design makes it easy to work and holds things more firmly..
  • Solid Construction: The woodwork vise has an iron and steel structure. The guide rods provide absolute resistance to racking, while an extra-wide 9" wide handle-plate delivers maximum stability to handle any project. This vise for woodworking also has a solid hardwood handle..
  • Easy To Use: Simply pull up on the handle and hold, this will cause the bench front vise nut to disengage. Adjust the wooden jaws to the appropriate opening and let go of the handle. A simple turn of the main handle will engage the screw and tighten the vise on the front..
  • Widely Applied: The workbench vise clamps for woodworking are a great solution for wood shops and woodworking studios. Our quick release vise bench is easy to mount with 1/4" lag bolts (not included)..
Check Stock

SWANLAKE 4.5 Inch Vise Jaw Pads Covers Protectors 1 Multi-Grooved & 1 Standard Set

  • These soft jaws for bench vise are made of Thermoplastic polyurethane rubber which is sturdy enough to hold your workpiece firmly in place and protect it from your metal bench vise..
  • Each vise pad set has 4 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
  • This 2 pack set with both standard & multi-groove jaw pads 4.5″ will work with a 4 inch to 5 inch bench vise..
  • This vise jaw covers feature groove sizes: 90 Degree angles: 1/16″, 1/8″, 1/4″, 3/4″. 60 Degree angle: 13/32″..
  • These vise jaws are ideal for woodworking, jewelry making, and more delicate type work..
Check Stock

46 Pieces Pin Vise Hand Drill Bits Set Include 1 Pin Vise Hand Drill 45 Mini Twist Drill Bit (0.3-3 mm) for DIY Wood Clay Resin Casting Molds Jewelry Pendant Making Supplies

  • ...drill, select a twist drill bit, put the clip into the drill bit, tighten and adjust to the tightness of the drill bit, install the selected drill bit, and rotate it in the right direction, then you can punch a hole.
  • Durable material: alloy material makes the pin vise hand drill more durable and not easy to get rust.
  • The mini twist drills are made of high speed steel, durable and not easy to blend while using.
  • Hopefully the pin vise hand drill bits set will give you a satisfying using experience, and the pin vise hand drill is equipped with 45 pieces mini twist drill bits.
  • Enough quantity for you to store at once for different uses on different occasions.
  • Various sizes: the size of twist drill ranges from 0.3, 0.35, 0.4, 0.45, 0.5, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5, 1.6, 1.8, 2.0, 2.35, 3.0 mm.
  • Equipped with 2 different plastic boxes for your storage.
  • You can put them in different inner boxes according to the different size of the drill bit, no need to worry about losing any piece of them.
  • Practical and portable: the manual hand drill set is lightweight and can be tucked into your bag easily, occupies little space.
  • Useful tools for electronic assembling, tooling, model making, winding, home decorating etc..
Check Stock

VEVOR Woodworking Vise, 9 Inch Woodworking Bench Vise Heavy-Duty Cast Iron Wood Working Vise, Quick Release Woodworker's Vise 10' Jaw Opening, Front Screw Vise for Woodworking, Cutting, and Drilling

  • 9 Inch Professional Use: Jaw width: 9"/230 mm. Jaw opening: 10". Throat depth: 4". Weight: 35.0 lbs. Our professional-grade woodworking vise is built to exact specifications for optimal performance. Get ample holding power and increase your cutting accuracy with half the effort..
  • Superior Iron Structure: Our heavy-duty woodworking bench vise is constructed out of cast iron and has polished guide rods designed for rugged use and extended life. The end stop prevents the vise from being opened too far..
  • Convenient Operation: The quick-release mechanism enables you to utilize this woodworker's vise quickly and efficiently. Pull up on the handle and hold.
  • this will cause the vise nut to disengage. Adjust the jaws to the appropriate opening and let go of the handle. A simple turn of the main handle will engage the screw and tighten the vise on the product..
  • Simplified Installation: This wood working vise comes with pre-drilled holes in the baseplate for quick mounting to your workbench or machine table. The jaws are also pre-bored to enable the installation and attachment of custom non-marring jaw faces to secure workpiece materials..
  • Widely Applied: The woodworking front vise is suitable for home, woodworking studios, teaching equipment, and fixed for process....
Check Stock

Yost Vises LDPV-6 Drill Press Vise | 6 Inch Jaw Width Portable Vise | Blue

  • DRILL PRESS VISE: Yost Vises LDPV-6 6-inch Drill Press Vise is crafted from cast iron. Durably light-weight and portable with texture jaws..
  • TECHNICAL SPECS: Jaw Width 6” (15.24 cm), Jaw Opening 5.75" (14.605 cm), Throat Depth 1" (2.54 cm), Slot Width: 0.6" (1.52 cm), Slot centerline: 7.15" (18.16 cm)..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee..
  • SAFETY INFORMATION: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all ins....
Check Stock

Yost Vises 750-E Multi-Jaw Rotating Vise System | 2 in 1 Multipurpose Bench and Pipe Vise | Secure Grip with Swivel Base | Made with a Combination of Ductile Iron & Hardened Steel | Medium Blue

  • MULTI-JAW VISE: The Yost Vises 750-E 5 Inch medium duty 60,000 PSI ductile iron cast vise has a dual jaw system equipped with a bench jaw to perfectly secure your wood or metal works as well as other manufacturing applications and a pipe jaw for your piping and tubing projects such as cutting or threading. Also has a large anvil work surface..
  • TECHNICAL SPECS: Jaw Width 5" (12.7 cm), Jaw Opening 5" (12.7 cm), Throat Depth 3" (7.62 cm), Min Pipe Capacity .375" (0.9525 cm), Max Pipe Capacity 2.5" (6.35 cm)..
  • SWIVEL BASE AND VISE HEAD: 360 Degree rotatable swivel base with dual lockdowns. Head of vise rotates a full 360 degrees..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and/or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over....
Check Stock