ReviewsRust resistant Puller Tool

ABN Air Compressor Clutch Rebuild Removal Tool Kit AC Clutch Puller for Car Auto Air Conditioning on GM, Ford, Chrysler

...ssor's inner shaft threads (This is the fixed part - inner bolt does not move when threading down outer piece).
Remove tool and stack other bearing on to take up the distance the clutch pushed into pulley.
BUILT TO LAST: Constructed from stainless steel with a black coated finish for ultimate strength and longevity.
Resists rust and corrosion with proper care and lubrication.
2 and 3 hold puller plate allows mechanical force to do all of the pulling on most clutches.
EASY STORAGE: Heavy-duty 10.5” x 8.25” x 2.25” inch (26.7cm x 21cm x 5.7cm) plastic blow-molded carrying case with handle for easy transport, safe storage, and quick organization.
CONTENTS: Complete with puller body, jaw and sleeve assembly, jack-screw, thrust washer, button, bearing, and puller plates.
includes (1) 3-eye round clutch plate sander arbor, (3) 1/4-inch – 20 Hex screws, (2) 3/8-inch – 16 Hex screws, (1) Sander arbor drive bolt, (1) Chrysler, Denso, Ford metric hub arbor remover, (1) GM standard thread clutch hub arbor remover / installer, (1) GM metric thread clutch hub arbor remover / installer, (1) arbor remover bearing, and (1) carrying case.

Check Stock

OEMTOOLS 25749 Wheel Hub Removal Tool, Green Hub Bearing Removal Tool, Hub Buster Tool Prevents Axle Removal or Damage, Works for 5, 6, and 8 Lug Hubs

Clean Break: Remove your damaged or frozen hub assembly without any risk of damaging the axle with this hub assembly removal tool.
Your Go-To Tool: The hub puller tool is designed to work with any configuration of axle-bolted hubs, including 5, 6, and 8 lug hubs.
If the Hub Fits: Hub removal is simplified with the 2-5/8” center-to-center hole pattern of this wheel hub puller, making installation easy and speeding up the hub removal process.
Shielded With Steel: Trust in your wheel hub remover’s longevity with its 3/4" steel backing plate and reinforced striking plate, giving it the strength to endure any wear and tear.
A Tool For the Ages: This wheel hub remover will resist rust and corrosion thanks to its high-quality steel construction, resulting in equipment you can rely on long-term.

Check Stock

Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool

...om the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. Easy and fast solve the problem of compression valves failing with small leaks. Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant..
【2 Ways To Remove】Remove the old compression fitting or the old angle stop.WAY 1: ONLY REMOVE THE FERRULE—Let the ferrule in between the red notched end of the tool (notched clamping ferrule). WAY 2: BOTH REMOVE THE COMPRESSION NUT AND FERRULE—Place red notched end of tool behind compression nut. And then both way1 or way2 all need to: Engage the silver head end in tubing. Hold tool firmly while turning the t-bar handle, the puller tool will automatically pull compression nut and ferrule..
【Gteat Compression Sleeve Puller Tool】We love and take pride in our angle stop puller and we back this ferrule blaster up with lifetime service. Have the confidence that this compression ring removal tool will last, if there are any issues of this plumbing tools, just contact us and we will make it right..

Check Stock

8MILELAKE 6pc Front End Service Tool Kit Ball Joint Separator Pitman Arm Tie Rod Puller

[APPLICATION] : This front end service tool allows for easy removal of most popular types of pitman arms, Tie Rods and Ball Joints.
[FEATURES] : Press type ball joint separator allows for ball joint removal without damage to boots and other part.
[ALL IN ONE] : This Ball Joint Separator, Pitman Arm Puller Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x plastic carry case..
[DURABLE MATERIAL] : Durable heavy duty forged front end service tools constructed from heat-treated alloy steel with anti rust plating finish. the jaws are shaped to ensure a positive grip, which leaves your hands free for the pulling job..
[PORTABLE CASE] : A plastic carry case is included, keep your tool parts well organized, easy for storage and carry out.

Check Stock

ZUIWAN Compression Ring Removal Tool,Pipe Olive Remover Puller Tool, fit for 5/8” and 7/8” Ferrule Olive Rings,Compression Sleeve Puller,Solid Brass

★High quality materials★ The pipe olive remover puller tool is made of excellent brass alloy which is characterized by high hardness and high wear resistance.Anti rust and anti-corrosion materials enable him to last long..
★2 specifications★ The compression olive puller is fit for copper pipes with a diameter of both 5/8”(15mm) and 7/8”(22mm)..
★Wide application★The ferrule blaster can be used for many kinds of pipes, such as kitchen, air conditioner, toilet and more..
★Less time and less stress★ The olive remover can remove the old ferrule quickly and without damaging the copper pipes..
★Must have★ A must have tool for plumbing with rigid copper pipes & valves..

Check Stock

YSTOOL Front End Service Tool Set with Automotive Ball Joint Separator Tie Rod End Puller Pitman Arm Remover 5 PCS Removal Splitter Kit for Car SUV Light Truck Pickup

YSTOOL front end service tool set adopts robust 45# steel construction, with high-strength and deformation resistance features, can stand high intensity extrusion. The stout forcing bolts surface adopts black oxidation treatment to prevent rust, grease the bolts up before using for smooth operation and protect the bolt thread, grease them up after using for better preservation..
This ball joint puller kit includes 1x ball joint separator, 1x tie rod end and ball joint remover, 1x conical pitman arm puller, 1x pitman arm and tie rod end puller, 1x pitman arm puller, and all the 5 tools are organized in a red blow molding case for easy storage and transportation. The 5PCS remove tools use C-shape, jaw shape and teardrop shape design, very simple, but can seat on the ball joint position tightly and provide very effective grip to fix the pullers..
According to your ball joint choose the compatible puller, insert the puller into the ball joint opening, aim the bolt at the ball joint, turn the bolt by using the right size ratchet wrench, squeeze the ball joint out. These ball joint pullers can easily remove the stubborn ball joint, pitman arm, idler arm, tie rod end, steering linkages and steering boxes on front suspension and steering system, and will ....

Check Stock

EEIEER Weed Puller Adjustable, 40’’ Stand-up Manual Weeders with 4 Claws, Efficient Weeding Tool for Lawn Yard Garden Patio

【Efficient Weeding Helper in Yard】The weeder puller allows you to remove weeds when standing, saving you from bending knees and back pain. With the weeding tool, you don't need to pull weeds by your hands or use harsh chemicals to harm your soil. Weeding is so easy with our stand-up weeder！.
【Upgraded 4-Claws Design】EEIEER standing weed puller is designed with 2 long stainless steel claws and 2 sharp serrated prongs, the 4 special claws will firmly grasp various weeds without breaking the roots, making it easier to remove weeds permanently no matter what kind of soil they grow on..
【Considerate Adjustable Weed Puller】Our 39.4‘’（1m）stand up weeding tool is suitable for most people's height, and the handle component are adjustable from 0~90°. You can choose a most comfortable angle to work. And the adjustable folding foot plate is also suitable for the slope, which is labor saving and time-saving..
【Durable & Practical】The weed removal tool is made of premium material and treated with black coat, which is durable and anti-rust. The plastic handle on the head is lighter and also provides a more comfortable feel. This weed puller combines durability and practicality, which can assure minimum fatigue..

Check Stock

ATPEAM Car Steering Wheel Puller | Automotive Steering Wheel Compressor Remover Set | Vehicle Steering Wheel Lock Plate Removal Tool Kit

Built to Last: Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion.
Function: Remove steering wheels of most vehicles with or without telescoping tilt steering columns.
Use to apply equal pressure so you can safely remove steering wheels, Perfect for the home or professional mechanic.
Tips: We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate.
Various Steer Wheel Cap Screws: Includes 4 sets of cap screws to be used for various thread requirements. Size of Cap Screws: M8-1.25 X 90 Mm, 3/8"-16 X 3-1/2", 5/16"-24 X 3-1/2", 5/16"-18 X 4".
Package Includeds: This steering wheel removal kit includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements and a carrying case for your convenience.

Check Stock

DURATECH 3-Piece 3-Jaw Gear Puller, 3\

Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
Use the DURATECH 3, 4, 6-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free....

Check Stock

6575 Hub Grappler Kit Universal for Vehicle Wheel Hub and Bearing Removal & Installation

...uller bar without the use of fasteners. ③ The puller is specifically designed to apply maximum force with minimal effort from an impact gun..
【SUPERIOR MATERIAL】-- All parts made of solid carbon steel, proprietary heat treating extends its life while anti-rust finish resisting impact, corrosion and deformation. Mold-blown plastic case is convenience to carry and storage. keeps all tool great and organized..
【SATISFACTION GUARANTEE】-- Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with This 6575 Hub Grappler Kit, simply return it for a full refund in 30 days, guarantee with 1 year’s warranty..

Check Stock

TIGERSGATE Inner Camshaft Bearing Installer Tool & Remove Puller (M8) for Harley Milwaukee Eight Engine

...ring removal with its specialized design safely installs bearings by applying pressure only to the outermost diameter, avoiding damage to the bearing, cam, or case..
Premium Quality: Made from high-stiffness steel, this kit is built to last with long-lasting durability and resistance to breakage. The powder-coated finish provides a clean surface that is resistant to corrosion and rust..
Excellent Customer Support: This kit comes with a puller, an installer, a docking tool, a support plate, a threaded bolt, a washer, a nut, a pin, and 4 screws, as shown in the picture. We back our product with 24/7 customer service and are always available to assist you with any questions or concerns you may have..

Check Stock