ReviewsRv Trailer Jacks

Lippert 191023 JT's Strong Arm Fifth-Wheel Jack Stabilizer Kit

  • ELIMINATES CHASSIS MOVEMENT — The JT’s Strong Arm Stabilizer Kit is designed to eliminate chassis movement in your 5th wheel RV or travel trailer using the same engineering as a race car chassis.
  • EASY INSTALLATION — With no welding required, this system can easily bolt-on to your landing gear and RV’s frame for a one-time installation.
  • THREE CONFIGURATIONS — Available in three sizes: Standard 5th Wheel Kit, Short 5th Wheel Kit and Travel Trailer.
  • COMPATIBILITY — This stabilizer kit was designed to work with most major RV jack assemblies — including, scissor, front landing gear and telescoping.
  • FULLY EQUIPPED — Kit comes complete with inner tubes, outer tubes and all necessary mounting and installation hardware.
  • RV fifth-wheel jack stabilizer kit comes complete with everything needed for DIY installation.
  • Designed to eliminate side-to-side and front-to-rear RV movement and shaking.
  • Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying.
  • The kit was designed for installation by your dealer or the do-it-yourself on fifth-wheel RVs with 58 inches or greater distance between the two front landing gear legs.
Check Stock

Preservation Solutions - Wood Juice Quart - Semi Dry Wood Stabilizer

  • Stablizing and leveling your RV/Trailer, Remains steady on soft surfaces because of wide bow-tie base.
  • Includes 4 steel jacks and 1 crank handle, Also include a 3/4" hex magnetic socket to raise/lower jack faster by power drill!.
  • Aslo include 16 pcs 3/8" mounting screws & matching 9/16" socket, a 11/36" mounting hole drill bit, one set of drilling guide sticker, everything you....
  • Extended height: 24", Retracted height: 4", retracted length: 26-1/2", width: 7.5".
  • Capacity: 6,000 lbs per jack, bulit by same material as other brand's 7500lbs jacks!.
Check Stock

Pair of Trailer Stabilizer Jacks Telescoping RV Camper Accessories for Travel 450kg 1000 Lbs Capacity Each

  • Each trailer stabilizer jack: Extended height: 18".
  • Retracted (collapsed) height: 11-1/2", static load capacity: 1000 lbs, lift capacity: 650 lbs, which helps to keep your trailer level and stable..
  • Design：design of telescoping structure, strong and easy to bolt or weld, suitable for RV trailer camper stabilizing leveling.
  • Product surface: black environmentally friendly electrophoretic paint, not easy to rust.
  • Reminder: you will need to supply your own mounting hardware: four 3/8" bolts, but the mounting holes are pre drilled..
Check Stock

NBJINGYI Adjustable Trailer Jack Base feet Jack Stand Drop Leg with 1.75 inch ID for Jacks Foot Jack Camper Accessories

  • 1.❤Perfect for modern A-frame style RV jacks with 1.75 inch ID - Fits MOST 2K to 5K jacks - Specially designed tube that fits inside the inner tube of the jack..
  • 2.❤Adjustable 12" Drop Leg Foot Stand with Pin for Jacks with 2" Inner Diameter..
  • 3.❤Included safety pin allows for quick, secure attachment ..
  • 4.❤Zinc Plated Metal for Rust and Weather Protection ..
  • 5.❤NBJINGYI specializes in the production of trailer accessories. It has a group of professional and advanced production equipment and technical personnel who can provide customers with high-quality products at reasonable prices..
Check Stock

WEIZE Slide Out Support Jacks - 20.5'' to 38.5'' Slide Out Stabilizers for RV, Camper and Travel Trailer, Supports Up to 4,700 lbs, 2 Pcs

  • GREATER STABILITY - The slide out supports save wear and tear on slide outs by reducing sag, can effectively solve the sagging and bending in the slide-out rails, and also help prevent costly slide out frame repairs. The support stands to help a little bit in the stability of the trailer. But please take note of the warning to "NOT" overtighten the support stands. This could cause damage to your slide out..
  • DURABLE - Heavy-duty steel and zinc powder-coating finish provide maximum strength and longevity for these rust-resisting RV slide out stabilizers. A new folding handle allows jacks in small compartments..
  • ADJUSTABLE DESIGN - The stabilizer jacks support 4,700 lbs. each and adjust from 20.5" - 38.5" H. The 5" dia. circular bases are stable on any surface and resist sink-in. U-shaped tops fit most slide-out frames..
  • EASY OPERATION - 2 per box, easy to operate, no assembly required. From the lowest setting, use the folding handle to raise the bracket slowly to meet the RV slide out supports bars. It is suggested to use concrete blocks or wooden leveling blocks for campers to stabilize the RV slide out jacks on an even surface..
  • WARRANTY - WEIZE aims for quality followed up with quality customer service directly provided by the manufacturer. The item is ....
Check Stock

mankk Reverse Polarity Momentary Toggle Rocker Switch 12V DC 20A 4 Pin DPDT ON -Off- ON RV Power Jack Motor Control Switch with Jumper Wire for 5th Wheel Tongue Trailer KCD2-7-223-4PIN-X

  • 【Type】Reverse Polarity Toggle Rocker Switch,This RV Jack Switch is DPDT( Double Pole Double Throw )(ON)-OFF- (ON) with 4 wires, 4 Pin.15A....
  • 【Easy To Install】This RV Power jack Reverse Polarity Switch comes with built-In jumper bars for polarity reversing. Simply connect power and....
  • 【Material】Switch is made of plastic case.The terminal is made of brass, silver plated..
  • 【Use】This polarity reversing switch easy replacement for most RV / trailer power tongue stabilizer Jacks, Fits many fifth wheel jacks. This is a....
  • 【Buy with confidence 】Package include：1Reverse Polarity Toggle Rocker Switch 4pin ,4 wires.for your best choices,the most comfortable goods ever....
Check Stock

Red Hound Auto Quick Change Bit 19 mm or 3/4 Inches Impact Driver Hex Socket Magnetic Nut Driver RV Lift Tack Trailer Stabilizer Leveling Scissor Jack Socket

  • works on both 19mm or 3/4" Hex Head Scissor Jack RV Trailer Stabilizers.
  • Reduces time and effort to raise or lower your scissor jacks.
  • The 1/4" Hex drive quick change shank will allow this versatile bit to work in a quick change chuck, or can fit in all 3/8" or 1/2" power drills with....
  • Works with 3/4" hex drive jacks, using power drill torque to raise/lower jacks.
  • Constructed of heavy duty chrome plated carbon steel.
Check Stock

OPENROAD 24' RV Trailer Stabilizer Leveling Scissor Jacks for Travel Trailer Camper, with Handle - 5000lbs - Set of 2

  • 【Capacity】This RV leveling jacks has a 5,000-pound capacity to help keep trailers level and stable.
  • 【Finish】For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat finish.
  • 【Telescopic height】Extended height: 24".
  • 【Includes】2 leveling scissor jacks and 1 crank handle.
  • 【Portable installation】This jack are compact and portable, allows either bolt-on or weld-on installation, easy operation.
Check Stock

Lippert Components 1958604 Hydraulic Jack Assembly in Silver - Aluminum - 8,000 lbs. (Gen I)

  • COMPATIBILITY — Designed to replace Level Up Hydraulic Jacks for the front, rear, driver, or passenger locations of your 5th wheel RV or travel trailer’s automatic leveling system.
  • EASY INSTALLATION — With minimal components needed, it’s easy to remove your RV’s old jack and replace it with this new aluminum, hydraulic jack.
  • RELIABLE STRENGTH — Engineered with an 8,000 lb. lift capacity, this large, aluminum landing gear replacement jack was built tough with a 9” footpad, and 7 mounting holes.
  • REPLACEMENT PART — At Lippert, we help you take the guesswork out of replacement parts with exact-match components designed to get your RV’s equipment up and running as usual.
  • IMPORTANT INFORMATION — Please reference your owner’s manual for detailed product installation and safety information before installation.
Check Stock

Andersen Hitches Ultimate Trailer Gear Super EZ Bag (3630)

  • Each Ultimate Trailer Gear EZ Block Bag includes the following: 4 EZ Blocks, 2 Camper Levelers with 2 TUFF Chocks, 1 Rapid Jack with 1 Rubber Pad, 1 Clean Step, and a Sturdy Carry Bag.
  • Keep 90% of the dirt OUTSIDE of your RV, Trailer, or Home, with the innovative Clean Step! No more dirty, worn-out mats to throw away… and less dirt inside means less cleaning for you! Just rinse the Clean Step with water.
  • EZ Blocks feature a recessed post hole that helps prevent post jacks from slipping. The EZ Block is designed to resist dirt and oil.
  • A full camper leveler kit (2 Camper Levelers, 2 TUFF chocks) are included in the bag! Simply drive on until level, chock… and DONE! You’ll won’t have to struggle with heavy boards or building blocks.
  • Keep all of your gear in ONE place so you can GRAB and GO. The Ultimate Trailer Gear Super EZ Bag is a heavy-duty, sturdy canvas carry bag with handles.
Check Stock

Set 4 Libra 24 6000lbs RV Trailer Stabilizer Leveling Scissor Jacks w/ Dual Power Drill sockets & mounting Hardware Set

  • Stablizing and leveling your RV/Trailer, Remains steady on soft surfaces because of wide bow-tie base.
  • Includes 4 steel jacks and a 3/4" hex magnetic socket to raise/lower jack faster by power drill!.
  • Aslo include 16 pcs 3/8" mounting screws & matching 9/16" socket, a 11/36" mounting hole drill bit, one set of drilling guide sticker, everything you need for install!.
  • Extended height: 24", Retracted height: 4", retracted length: 26-1/2", width: 7.5".
  • Capacity: 6,000 lbs per jack, bulit by same material as other brand's 7500lbs jacks!.
Check Stock