ReviewsRv Water Inlet Connection

Class A Customs 24 Gallon RV Waste Black Water Holding Tank WT-2400

  • 24 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 38 Gallon RV Waste Black Water Holding Tank WT-3800

  • 38 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 28 Gallon RV Waste Black Water Holding Tank WT-2800

  • 28 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 18.5 Gallon RV Waste Black Water Holding Tank WT-1850

  • 18.5 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

VULCAN-HART 3/4\ NPT Natural Gas Pressure Regulator 3\ to 6\ Water Column Range 408279-1

  • [New Upgrade Process]: The inside of the pressure gauge is filled with high class silicone oil. The clarity, stability and seismic performance are higher than other gauge and it is not easy to fade. The gauge is filled with oil to prevent water intrusion and rust, and the sealing is stronger, the service life is prolonged..
  • [Lead Free Brass]: RV Water Pressure Regulator is tested strictly to meet NSF lead-free requirements of less than 0.25%, silver body, is different from other regulators, class C46500 LEAD-FREE BRASS treated by hot casting and plating double process technology, effectively inhibit bacterial growth, make the lead content of the RV regulator reach the minimum standard set by the market industry, which make it more safer and healthier..
  • [Dual-Layer Inlet Screened Filter]: RV Water Pressure Regulator is designed with 3/4 NH thread (hose thread or garden hose thread), compatible with All US water sources. The Dual-Layer inlet screened filter helps to filter particles like gravel, debris to prevent impurity blocking and valve body damage, bring you continuous water flow which is about 2-4 gallons per minute, and will not reduced the water flow rate..
  • [Adjustable Water Pressure Regulator]: RV Water Pressure Regulator adjust Water Pressure fr....
Check Stock

Class A Customs 48 Gallon RV Waste Black Water Holding Tank 56 x 30 x 9 WT-4800

  • 48 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Dumble Power Inlet Port Plug 125v 2-Pole 3-Wire AC Cord Port Plug 15 Amp RV Electrical Outlet Outdoor Enclosed Trailer

  • [Power Your Vacation]: When you go hiking and camping in your RV or trailer, depend on the Dumble Inlet Port Plug to provide power to your appliances and generators.
  • RV power outlet package includes 1 RV receptacle power inlet port.
  • [Built to Last]: No need to worry about this RV power inlet cracking and falling apart when you need it most.
  • AC power inlet port plug is constructed of weather-resistant black nylon and copper to withstand extended, repeated use outdoors for your campsite.
  • [Easy to Install]: Drill a 1-3/4 inch (4.4cm) hole where you want to attach plug to your camper or trailer.
  • Use power drill or screwdriver to attach AC power inlet port to wall.
  • (4) 1/4-inch (0.6cm) installation screws and instructions included.
  • [For Your Appliances]: Connect this AC power inlet port plug to your outdoor generator to indoor applications.
  • Install electrical appliances with this enclosed trailer port plug using AWG 12 to 18 wires (not included).
  • [Perfect Size]: Electrical outlet socket plug measures 2.5 x 2.5 x 3 inches (6.3 x 6.3 x 7.6cm).
  • Power socket outlet will reach 1-3/4 inches into the wall of your cabin, trailer, and RV.
Check Stock

Abn Outdoor Marine Electrical Power Male Inlet Socket Box 50A 125/250V w/Connector, Twist Lock Plug Cord Cover, Ring

  • KEEP CORDS SAFE: The ABN Power Cord Inlet, Locking Inlet, and Replaceable Cover Kit installs directly to your application to allow a safe and detachable power connection.
  • Designed to secure and protect your cord connector and keep a weatherproof seal for your RV, camper, trailer, marine watercraft, and other outdoor applications.
  • For regulating and waterproofing purposes.
  • Package includes (1) traditional stainless steel shore power inlet with a gasket cover + (1) plug protector cover + (1) ring.
  • FITS YOUR APPLICATION: 50 Amp, 125/250 Volt white square inlet that quickly locks the cord set to the inlet.
  • Cover includes side grips for an easy and secure connection.
  • Designed for use with round jacketed, hard usage cable (S-type), 8-3AWG.
  • PERFECT SIZE: Inlet – 2.2-inch (5.6cm) inner diameter (ID).
  • 3-inch x 3.5-inch (7.6cm x 8.9cm) outer width.
  • Cover and ring – 2.4-inch (6.1cm) inner diameter (ID).
  • Connector – Approximate measurement across the face is 2 inches (5.1cm).
  • Across the back where the cord enters adds 0.25 inch (2.25 inches / 5.7cm across).
Check Stock

Flameweld 30 Amp Power Inlet Box, NEMA 3R Power Inlet Box, NEMA L14-30P PB30 Power Inlet Box, 125/250 Volt, 7500 Watts Generator Power Hookup, Weatherproof for Outdoor Use, UL Listed

  • [UL listed generator inlet box]: 30 Amp generator inlet box supports NEMA L14-30 inlet generator plug, Allowable operating voltage range: 125/250V, 7500W. This pb30 power inlet box is suitable for use with the power cord..
  • [Safely running outdoor]: Anti-corrosive powder-coat paint stainless steel housing with waterproof clamshell effectively increased service life.Safe to use in any environment..
  • [Large space inlet box]: Large space makes wiring convenient and good heat dissipation. The front panel is detachable for easy installation..
  • [3 connecting holes ]: The power inlet box has 3 holes (left, right, bottom) for easy connection to the transfer switch or panel..
  • This Inlet Box is ideal for installation in the open area of an outdoor generator, without wires running through Windows or doors.Can be used as a backup power source during power outage, can be used for rv, house exterior and so on..
Check Stock

Beech Lane External RV Dual Water Filter System, Leak-Free Brass Fittings, Mounting Bracket and Two Filters Included, Sturdy Construction is Built to Last

  • Heavy Duty Construction Designed Specifically For RV Use | Lifetime Manufacturer Warranty | The housing, fixtures, and bracket are manufactured by Beech Lane specifically for outdoor RV use and the rough exposure that comes with it.  Thick walled water canisters, tight seals, and internal components are designed to last on the road.  The filter includes a wrench to make removing the housing easy.
  • Lead-Free Brass Fixtures Prevent Leaks | The use of 3/4" lead-free brass fixture provides a strong connection to the inlet and outlet hose with increased leak resistance when compared to plastic fixtures on competition..
  • Includes 5 Micron and 0.5 Micron Filters To Maximize Water Quality | Using both a 5 micron sediment and 0.5 micron carbon block filter for double filtration works to filter both large particles such as sand and dirt along with smaller particles such as chlorine. The water filters can be replaced by Beech Lane Water Filter replacement filters or any brand of the same specifications.
  • No Hassle Lifetime Manufacturer Warranty | The Beech Lane Lifetime Manufacturer warranty covers product failure down the road.
Check Stock

Marinco CS6364N 50 Amp 125 Volt//250 Volt Connector

  • 50A 125/250V locking w/ sealing collar (male plug) to 50A 125/250V locking (female side) Right Angle Adapter.
  • Convert your existing 30A or 50A detachable power cord from a straight connection to a right angle connection.
  • Right angle detachable connections provide minimal cordset protrusion from inlets for more clearance in tight RV spaces and reduces strain at the....
  • The GripLock handle design allows easy hook-up and correct blade alignment with the inlet, even in darkness.
Check Stock