ReviewsSae Bumper Bolts

eAccessoriesUSA Front License Plate Tag Holder Mounting Mount Adapter Bumper Kit Bracket for Acura (All Models) Quantity (9.45$ to 5.60$)(Each with 6 Unique Screws+Wrench+2 Built in Nuts) (1)

  • ► ???? Compatibility: It’s a design made to fit all ACURA models ( CL, ILX, ILX HYBRID, INTEGRA, LEGEND, MDX, MDX SPORT HYBRID, NSX, RDX, RL, RLX, RLX SPORT HYBRID, RSX, SLX, TL, TLX, TSX, VIGOR, ZDX ) with Flat Shape of the Bumpers. ► ???? Won’t work on Curved Spot of the Bumper or V Shaped Bumpers! ► ???? You can mount it on left or right side of the bumper also. ► ???? This is not an OEM bracket.
  • ► ???? Holes: May require new holes in the front bumper! (Use your vehicle’s original screws if holes are already present on the bumper.) ►???? Screws Included: 2 SCREWS 4 BOLTS WRENCH & 2 BUILT IN NUTS for fast & easy installation (INSTALLATION INSTRUCTIONS! EASY 2 STEP INSTALLATION: 1) Attach mounting bracket to the front Bumper with 2 sharp screws. 2) Choose short flat bolts to attach just license plate to the mounting bracket or long flat bolts to mount license plate with frame).
  • ► ???? Years: 2000 – 2020 ( 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 )► ???? Placement on Vehicle: Middle, Center, Front Bumper ► ???? Design: will fit all standard novelty/license....
Check Stock

Segomo Tools 10 Piece Lug Nut Remover & Bolt Extractor - Metric and SAE Extractor Set - 10-19mm Stripped Bolt Remover & Nut Extractor Set - Stripped Lug Nut Remover Kit - NBE10919MM

  • [ Extract Even Damaged Bolts & Nuts ] Remove even the most stubborn nuts, bolts, lugs, studs, hex screws, and more. The left-hand spiral of each piece of this nut anad bolt extractor set is desgined for locking on to rounded ,damaged bolts for easy grip of stud, bolt or nuts..
  • [ Different Metric & SAE Sizes ] Work on different jobs with this extractor socket set. It offers the following sizes: 9mm 10mm 11mm (7/16) 12mm 13mm 14mm 15mm 16mm(5/8) 17mm 19mm (3/4) Can be used on SAE and Metric sizes.The working end has a helical shaped flute to help grip rounded fasteners, round head bolts and pan head screws..
  • [ Will Last For Years ] Our bolt & nut extractor kit is made from black Chrome Molybdenum that provides greater strength and durability and prevents corrosion. You will be able to work with this tool for years!.
  • [ 3/8 Drive Socket Set ] You can use our stripped lug nut remover with 3/8 square drive for use with socket wrench or impact wrench gun..
  • [ Stay Organized ] This lug nut & bolt extractor tool comes supplied in a durable case so that you can keep the set organized and easily transport it between different jobs..
Check Stock

eAccessoriesUSA 2 Front License Plate Tag Holder Mounting Mount Adapter Bumper Kit Bracket for Acura (All Models) Quantity (9.45$ to 5.60$)(Each with 6 Unique Screws+Wrench+2 Built in Nuts) (2)

  • ► ???? Compatibility: It’s a design made to fit all ACURA models ( CL, ILX, ILX HYBRID, INTEGRA, LEGEND, MDX, MDX SPORT HYBRID, NSX, RDX, RL, RLX, RLX SPORT HYBRID, RSX, SLX, TL, TLX, TSX, VIGOR, ZDX ) with Flat Shape of the Bumpers. ► ???? Won’t work on Curved Spot of the Bumper or V Shaped Bumpers! ► ???? You can mount it on left or right side of the bumper also. ► ???? This is not an OEM bracket.
  • ► ???? Holes: May require new holes in the front bumper! (Use your vehicle’s original screws if holes are already present on the bumper.) ►???? Screws Included: 2 SCREWS 4 BOLTS WRENCH & 2 BUILT IN NUTS for fast & easy installation (INSTALLATION INSTRUCTIONS! EASY 2 STEP INSTALLATION: 1) Attach mounting bracket to the front Bumper with 2 sharp screws. 2) Choose short flat bolts to attach just license plate to the mounting bracket or long flat bolts to mount license plate with frame).
  • ► ???? Years: 2000 – 2020 ( 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 )► ???? Placement on Vehicle: Middle, Center, Front Bumper ► ???? Design: will fit all standard novelty/license....
Check Stock

RV Bumper Hitch Receiver 2 inch Adapter Receiver Fits for 4 x 4 inches Square Bumper Beam Level Trailer Towing Purpose

  • Upgrade the design: Universal, applicable to different width and height of the steel beam, the most important thing is that according to the diferent steel beam, has the adjustment function, can tightly lock the steel beam does not shake ! Patented products, please do not imitate !!.
  • VERSATILE DESIGN:The RV Camper bumper hitch 2 in receiver are designed to fits travel trailer 4” x 4” bumper beam, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL: Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included hardware and typically just a few tools..
  • PACKAGE: Camper RV bumper hitch, Instructions, 4 bolts included for Mounting hardware..
Check Stock

Grade 2 Shear Bolts for Rotary Cutters 1/2\ x 3-1/2\ with Nylock Nuts - 5 Pack

  • Mill certified Grade 2 SAE J429 shear bolts, stronger than typical hardware store ASTM A307 bolts..
  • Nyloc nut prevents loosening from vibration..
  • Kit includes 5 shear bolts and 5 nylon locknuts..
  • Universal Size for Rotary Cutters: 1/2" Diameter, 3-1/2" Length. Compatible with most rotary cutters such as Bush Hog and King Cutter..
  • Zinc (Cr+3) RoHS compliant finish prevents corrosion..
Check Stock

CURT 19030 Step Bumper Hitch Receiver, 2-Inch, 5,000 lbs.

  • EASY TO INSTALL. This bumper hitch can be used on a wide variety of trucks and SUVs, featuring slotted mounting holes spaced 8-1/2 inches apart, on-center. This trailer hitch receiver is designed to bolt onto the bottom of the truck's step bumper.
  • DEPENDABLE STRENGTH. This step bumper hitch is rated for 5,000 lbs. gross trailer weight and 500 lbs. tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. For a wide variety of towing options, this bumper hitch receiver equips your truck with a standard 2-inch x 2-inch hitch receiver. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. This bumper mount hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This hitch bumper receiver is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The two finishes are co-cured for exceptional resistance to rust, chipping and UV rays.
Check Stock

ABN Combination Wrench Set – 16 Pc Raised Panel SAE Wrench Set with Wrench Roll Up Pouch, Black Spanner Wrench Set

  • REMOVE DIFFICULT FASTENERS EASILY: The ABN | Raised Panel Combination Wrench Set Large SAE Wrench Set offers increased clearance and minimizes slippage when used on hard-to-remove nuts and bolts.
  • With an open-end style on one side to tighten and loosen bolts and a box-end on the other for leverage and a firm grip on nuts and bolts, these combination wrench sets are perfect for your project.
  • INCREASES LEVERAGE AND TORQUE: Jumbo wrench set also features a 15-degree angled offset.
  • This raised panel design increases the large wrench sets strength, leverage, and gripping power so your wrenches can withstand rigorous use.
  • These hand tools sets for mechanics are perfect for millwright work and automotive work.
  • FITS FOR YOUR NEEDS: Each package includes (16) SAE wrenches in sizes 1/4 inch, 5/16 inch, 3/8 inch, 7/16 inch, 1/2 inch, 9/16 inch, 5/8 inch, 11/16 inch, 3/4 inch, 13/16 inch, 7/8 inch, 15/16 inch, 1 inch, 1-1/16 inch, 1-1/8 inch, and 1-1/4 inch and a wrench pouch for your convenience.
  • BUILT TO LAST: Constructed from drop forged steel, these large wrench tools are designed for maximum durability, longevity, and torque.
  • Black oxide finish provides resistance to rust, abrasion, and corrosion.
  • Standard combination wrench set tools are permanently laser etc....
Check Stock

For Dodge Charger Front Bumper Grille 2011 12 13 2014 Lower | Textured Gray | Plastic | CH1036113 | 68092605AA

  • Exact fit to OEM#: 68092605AA and Partslink#: CH1036113.
  • Meets or exceeds DOT & SAE compliance standards.
  • Plastic | Textured Gray | Lower | Bumper Grille.
  • CHARGER 11-14 FRONT BUMPER GRILLE, Txtd Gray, w/o Adaptive Cruise Control, (R/T)/SE/SXT Models.
Check Stock

ABN Impact Nut Driver Tool Set - 6pc SAE 6 IN Long Shank Nut Driver Bits Magnetic Tip Sockets, 1/4 IN Hex Shank

  • IMPACT DRIVER SET: Use the ABN SAE Magnetic Nut Driver Bits Impact Drill Sockets Set to tighten and remove nuts and bolts when working in your home, on your vehicle, or on metal or woodworking projects.
  • EXTEND YOUR REACH: 6-inch (15.2cm) long reach to access narrow spaces and hard-to-reach areas.
  • 1.25 inch (3.1cm) long hex shanks feature 1/4 inch (6.35mm) diameter.
  • NEVER DROP A FASTENER AGAIN: Impact nut driver magnetic impact driver sockets set have powerful magnets to provide superior retention on screws, nuts, and bolts while operating.
  • BUILT TO LAST: Prevent rounding off fasteners with the recessed 6 point nut drivers for impact drills.
  • Chrome-vanadium steel and black phosphate coating provides maximum strength and rust resistance.
  • PACKAGE CONTENTS: Impact driver socket adapter set includes 6 SAE impact drivers (1/4, 5/16, 3/8, 7/16, 1/2, and 9/16 inch) and 1 bit driver holder.
  • Each magnetic extended nut driver bit nutsetter tool is permanently laser-etched sizing makes identification easy.
Check Stock

JY Sdyl Universal Front Bumper Lip Splitter Spoiler Front bumper lip body kit Adjustable Front Spoiler 3pcs Black-Carbon fiber

  • ★Applicable model：The Universal Front Bumper Lip Body Kit is adjustable, fits for most cars and can rotate the front splitter angle, making it fit....
  • ★Upgrade Appearance: Carbon Fiber front bumper lip splitter can significantly change the way the exterior of your car looks. It increases car’s....
  • ★Premium Material: The front bumper lip separator is made of high-quality ABS material, which is waterproof, sturdy, impact-resistant and not easy....
  • ★Easy to install: Integrated consideration of fastness, the bumper lip require drilling holes and apply bolts to attach to your bumper. You can....
  • ★Package & Service: 1 *Universal Front Bumper Lip Body Kit. If you have any questions about the Black/Carbon Fiber front bumper lip splitter, please....
Check Stock

NEIKO 02461A 3/4 Inch Drive Impact Socket Set, SAE 1” to 1-1/2”, 8 PC, Deep/Jumbo Sockets, Chrome Vanadium Cr-V

  • HEAVY DUTY BUILD: The construction of each 3/4” socket in this 8 piece set consists of extremely strong Chrome Vanadium (Cr-V) steel that will output greater torque, but also has a corrosion resistant black phosphate finish to give your sets longevity and longer lifespan..
  • LARGE SOCKET: This ¾” impact socket set is designed for use with impact wrenches. A set of 8 high-torque, 6-point SAE sockets with ¾ inch drive, each jumbo socket is used to remove tough nuts and bolts on larger vehicles..
  • SPECIAL DEEP DESIGN: Each socket has a unique design that grips the flat sides of fasteners rather than the corners to prevent stripping and rounding off of bolts. With a high torque impact gun, each standard socket will torque the most stubborn fasteners..
  • HIGH VISIBILITY MARKINGS: The easy-to-see high-contrast laser-etched standard size markings allow easy reading in low light settings and promote efficiency on the job..
  • INCLUDES COMMON SAE SIZES: Includes eight common Standard socket sizes (1, 1-1/16, 1-1/8, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2 inch) with blow-mold storage case included..
Check Stock