ReviewsSae Oil

Woods 55666623 Primary Wire, 16-Gauge, Black, 100 Ft

  • Coated in a water, Oil, chemical, and abrasion resistant PVC jacket.
  • Primarily used for electrical applications within cars, trucks, and boats.
  • Specified for sae international surface vehicle standard j-1128.
  • Handy spool size is convenient for many different projects meets sae standards and is RoHS compliant.
Check Stock

Concentric 1 HP 115/208-230 Volt AC Hydraulic Power Unit - Basic, Model Number 1530036

  • Product Details: Our hydraulic pump is designed with a 12V DC motor (Power: 1.6-3.0kw) and a 4-quart reservoir. The max relief pressure on A port (SAE#6) is 3200 PSI, and on B port (SAE#6) is 1500 PSI.
  • the flow rate is 2 GPM, and it is a double-acting pump for both power up and power down..
  • Easy to Use: This 12V hydraulic power unit has been fully assembled in advance. The wiring is simple and comes with operating instructions. Two additional SAE#6 connectors and one 15 ft remote control are included in the package..
  • Reliable Quality: The dump trailer pump is made of sturdy metal.
  • thus, the oil tank is not easy to crack or be damaged. As a power unit, this is a perfect replacement pump for remote hydraulic systems. Equipped with an overflow valve, it automatically releases when overpressure, safer and reliable..
  • Rapid Start: With its powerful motor, this hydraulic electric pump is quick to start and quick to output oil.
  • it can provide strong power for hydraulic systems like dump trailers, dump beds and is able to complete lifting in a short time..
  • Wide Application: This power unit is widely used in stackers, small, and medium-sized lifting platforms. It is compatible with many dump trailers and movers and is a direct replacement for 12V DC remotely contr....
Check Stock

Thorsen Tool 04-536 45 Degree Offset Boxed End Wrench 12 Pt SAE 7/8-15/16 Length

  • REMOVE DIFFICULT FASTENERS: The ABN | 16-Piece Raised Panel Combo Wrench Set is an SAE wrench set that offers increased clearance and minimizes....
  • SAE SIZES: 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”,....
  • BUILT TO LAST: Standard wrenches constructed from drop forged steel for maximum strength, longevity, and grip even when covered in oil during....
  • EASY STORAGE: 25.5-inch x 18.9-inch (64.8cm x 48cm) canvas pouch that includes 3 metal ring grommet mounting holes to hang on your pegboard or wall.
  • PACKAGE CONTENTS: Package includes (16) SAE hand wrenches from 1/4-inch to 1-1/4-inch and (1) wrench roll up pouch for your convenience.
Check Stock

BACOENG Vacuum Pump & Manifold Gauge Set - HVAC A/C Refrigeration Kit - Diagnostic R12 R22 R134a R410A - w/Case

  • Gauge Set — 2 Valve Manifolds with Sight-glass & 1/4″ SAE fittings anodized aluminum block body, oversized sight-glass for easy viewing the refrigerant flow high quality gauge and high accuracy of reading.
  • Vacuum Pump – Newly Designed Compact Vacuum Pump, Portable and Stronger. Flow rate: 3.6CFM Power: 1/4HP Ultimate Vacuum: 0.8Pa.
  • Accessory–3 × 4FT Blue Red Yellow Refrigrant Hose,2 × 1/4″ SAE Male to 5/16″ SAE Female Adapters（R410a）, 1 × Toolkit, 12oz Vacuum Oil, 1 × Manual for Pump and Gauge.
  • Hose– All hose are complied with SAE-J2196 standard standard. Hose Working pressure: 800PSI-4000PSI Acceptable refrigerant: CFC HCFC and HFC.
  • 【Attention】- Ideal for R12 R22 R410A R407C. NEED additional high & low pressure side quick couplers B085XHTS1W if you need to repair R134a vehicle A/C system..
Check Stock

VEVOR Hydraulic Power Unit 12 Volt Dump Trailer Hydraulic Pump Double Acting 12 Quart Hydraulic Pump Electric Hydraulic Cylinder Pump with Brass Pressure Gauge for Dump Trailer Lift Gates & Trucker

  • Product Details: This hydraulic pump is designed with a 12V DC motor (Power: 1.6-3.0kw), a 12-quart reservoir and a start solenoid. The max relief pressure on A port (SAE#6) is 3200 PSI, and on B port (SAE#6) is 1500 PSI.
  • it is a double-acting pump for both power up and power down..
  • Easy to Use: Our hydraulic power unit has been fully assembled. The wiring is simple with operating instructions. The hydraulic gauge gives clear value of the pressure and the 15ft remote allows you to control in a long distance. In addition, we provide you with one SAE#6 connector and a M18 connector. Please note: The connector on the unit is metric. If you need to use the SAE#6 connector, please replace it by yourself..
  • Reliable Quality: The dump trailer pump is made of sturdy metal.
  • thus, the oil tank is not easy to crack or be damaged. As a power unit, this is a perfect replacement pump for remote hydraulic systems. Equipped with a relief valve, it can avoid overpressure, safer and reliable..
  • Rapid Start: With its powerful motor, this hydraulic electric pump is quick to start and quick to output oil.
  • it can provide strong power for hydraulic....
Check Stock

Bonvoisin 30T Hydraulic Cylinder Jack Porta Power Ram 2\ Stroke Mini Single Acting Lifting Cylinders for Machinery Shipbuilding

  • Product Details: Our hydraulic pump is designed with a 12V DC motor (Power: 1.6-3.0kw) and a 10-quart reservoir. The max relief pressure on A port (SAE#6) is 3200 PSI, and on B port (SAE#6) is 1500 PSI.
  • the flow rate is 2 GPM, and it is a double-acting pump for both power up and power down..
  • Easy to Use: This 12V hydraulic power unit has been fully assembled in advance. The wiring is simple and comes with operating instructions. It includes a 15 ft remote control and two additional SAE#6 connectors are provided for replacement..
  • Reliable Quality: The dump trailer pump is made of sturdy metal.
  • thus, the oil tank is not easy to crack or be damaged. As a power unit, this is a perfect replacement pump for remote hydraulic systems. Equipped with a relief valve, it avoids overpressure, safer and reliable..
  • Rapid Start: With its powerful motor, this hydraulic electric pump is quick to start and quick to output oil.
  • it can provide strong power for hydraulic systems like dump trailers, dump beds and is able to complete lifting in a short time..
  • Wide Application: This power unit is widely used in stackers, small, and medium-sized lifting platforms. It is compatible with many dump trailers and movers and is a direct replacement for 12V DC remotely controlled hydrau....
Check Stock

Grease Gun Coupler, Strong Lock on Grease Couplers with 18 Inch Spring Flex Hose, High Pressure Greases Gun Coupler, Compatible with All Grease Guns 1/8\ NPT Grease Gun Fittings(Single Handle)

  • ... under the extreme pressure of 10000 PSI, allowing you to work efficiently..
  • 【Strong Compatibility】: With 1/8 "NPT standard thread connection, it is easy to release when pressurized. It is applicable to all 1/8" NPT standard oil guns, pneumatic oil guns, manual oil guns, electric oil guns, as well as all DIN and SAE nozzles and all SAE and metric Zerk connectors..
  • 【Quick Lock And Release】: Press the trigger and connect it to the required oil gun accessories. The lever action mechanism locks the coupling on the oil gun to form a leak proof seal on the joint. Press the trigger again to release without twisting or jerking..
  • 【Widely Used】: Heavy oil gun tools are used for vehicle maintenance, large machinery and axle transmission systems, and are also very suitable for lubricating agricultural tractors, plows, pile pullers, seeders, etc. It is an ideal choice for mechanical lubrication in any workplace such as construction sites, mines, farms, etc!.
Check Stock

YAMATIC 3/4\ Shaft Horizontal Pressure Washer Pump - 3000 PSI @ 2.5 GPM - Original Engineering OEM Pump for Most Brand gas engine power washer

  • ...p instead of buying a whole new power washer. This easy-to-install kit is great for power washers that can support 3700 PSI at 2.5 GPM to wash walls, fences, sidewalks, vehicles, and more.
  • Easy Installation: This replacement pump features a garden hose inlet and threaded M22 connection high pressure hose outlet. The SAE standard bolt pattern that fits most* gas-powered pressure washers. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility).
  • Adjustable power: This pump includes PowerBoost Technology that delivers higher pressure at the nozzle for a more efficient cleaning experience. There is also a hand turn knob that lets you reduce power at your convenience for tasks that require lower pressure.
  • Know when to change your oil: The sight glass and advanced oil seal technology eliminates the need for a dipstick. With visibility to the oil level and the oil itself, you can easily see when oil levels are low or if water has clouded the oil.
  • Get the right pump for your machine: this pump is designed for gas powered pressure washers with horizontal engines. Its SAE bolt pattern....
Check Stock

Gates 24703 Fuel Filler Hose 1.5 IN (38mm) X 1.5 FT

  • Smooth oil resistant modified nitrile cover, tough synthetic knit textile cord reinforcement and petroleum-resistant nitrile tube.
  • Offered in bent formed configurations and straight.
  • Meets SAE 30R6 or 30R7 (except oxidized gasoline test).
  • Meets SAE 30R5 - Wall thickness is 4.47±1.42mm (0.176±0.056 inch) excluding embedded wire area.
Check Stock

Kawasaki Genuine 49065-0721 Oil Change Kit w/Yellow Oil pad Funnel 10W-40 Oil and Fuel Treatment

  • Kawasaki SAE 10W-40 Engine Oil Synthetic Blend (2 Quarts).
  • Yellow Oil absorbent pad prevents spilling on floors and other surfaces.
  • Oil Funnel - Great for adding oil, or using when draining oil.
  • 3-n-1 Advanced Fuel Treatment 2oz Bottle Treats 10 gallons gas.
Check Stock

AAA 90036 Horizontal Triplex Plunger Replacement Pressure Washer Pump Kit, 3200 PSI, 2.8 GPM, 3/4' Shaft, Includes Hardware and Siphon Tube, for Industrial Gas Powered Machines, Black

  • ...p instead of buying a whole new power washer. This easy-to-install kit is great for power washers that can support 3200 PSI at 2.8 GPM to wash walls, fences, sidewalks, vehicles, and more.
  • Easy Installation: This replacement pump features a garden hose inlet and threaded M22 connection high pressure hose outlet. The SAE standard bolt pattern that fits most* gas-powered pressure washers. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility).
  • Adjustable power: This pump includes PowerBoost Technology that delivers higher pressure at the nozzle for a more efficient cleaning experience. There is also a hand turn knob that lets you reduce power at your convenience for tasks that require lower pressure.
  • Know when to change your oil: The sight glass and advanced oil seal technology eliminates the need for a dipstick. With visibility to the oil level and the oil itself, you can easily see when oil levels are low or if water has clouded the oil.
  • Get the right pump for your machine: this pump is designed for gas powered pressure washers with horizontal engines. Its SAE bolt pattern....
Check Stock