ReviewsSae Shim Stock

Air Shim Bag - 3 Pack

  • Air Shim Bag – 3 PCS Pack. 3 sizes in Small, Medium, and Large, to meet a variety of work needs..
  • Air Shim Bag – A variety of purposes, including moving and adjusting the level..
  • Air Shim Bag – Allows a single installer to hold the unit in place, accurately adjust and level..
  • Air Shim Bag – Improve work efficiency and reduce unnecessary labor..
  • Air Shim Bag – ABS+TPU+420D nylon commercial grade quality, durability and performance..
Check Stock

Magpul Hunter X-22 Takedown Front Barrel Mount, Black

  • Compatible with the Mogul hunter X-22 takedown Stock (MAG760).
  • Easy exchange of different barrels for the same rifle.
  • Reversible barrel tray accepts factory and aftermarket barrels up to 0. 92" Outside diameter.
  • Adjustable barrel-tensioning shim for setting barrel preload. Dimensions - 10.5 x 1.75 x 1.9 inches.
  • M-look slots on sides and bottom for a variety of accessory and sling mounting options.
  • dimpled drill point to install optional Sling swivel studs.
  • Reinforced polymer construction for strength and durability.
Check Stock

ECOTRIC New Front Headlamp Left Driver Side Headlight Assembly Compatible with 2011-2014 Ford Edge Replacement for BT4Z-13008-B

  • ... replacement , fits for 2012 2013 2014 ToyotaCamry models only, do not fit models with factory HID headlights). (Interchange Part Number: 8115006470, 8111006470, 8115006800, 8111006800.).
  • DIRECT FIT REPLACEMENT ➤ Factory headlight replacement, plug-n-play operation, direct bolt-on OE fitment or replacement for the stock unit, requires no modification or drilling. Re-use original high & low beam bulbs, direct fit replacement, trouble-free installation. It can correctly replace the original quality part, durable for long service life..
  • DOT & SAE COMPLIANCE ➤ Our heavy duty polycarbonate lens offer superior UV protection and a high impact resistance. Our Headlight features condensation and debris protection, use the highest quality butyl sealant to prevent any imperfections to enter the light housing. Comes with street legal reflectors, highly reflective reflectors offer OEM compliance with DOT and SAE standards, direct fit replacement, easy to install..
  • TECHNICAL PARAMETERS ➤ Style: Headlight Replacement.
  • Placement on Vehicle: Front, Driver Side.
  • Fitment Type: Fitment Type: Performance/Custom.
  • High Beam Bulb: Use Stock Bulb for Installation (not inclu....
Check Stock

Howards Cams 96210-30-1: Valve Spring Shim; 1.250 .030

  • Valve Spring Shim Outside Diameter: 1.250.
Check Stock

Game Room Guys Rubber Pool Table Leg Shims Varied Sizes - Set of 12

  • LEVEL YOUR POOL TABLE - Mix and Match Shims to Level Your Pool Table.
  • VARIED THICKNESS - (3) 1/32 Rubber Shim, (3) 1/16 Rubber Shim, (3) 1/8 Rubber Shim, (3) 1/4 Rubber Shim.
  • GREAT FOR BARS AND GAME ROOMS - Perfect for Commerical and Home Use.
  • LONG-LASTING RUBBER - Rubber Lasts Longer than Wood Shims.
Check Stock

Game Room Guys Rubber Pool Table Leg Shims Varied Sizes -Set of 8

  • LEVEL YOUR POOL TABLE - Mix and Match Shims to Level Your Pool Table.
  • VARIED THICKNESS - (2) 1/32 Rubber Shim, (2) 1/16 Rubber Shim, (2) 1/8 Rubber Shim, (2) 1/4 Rubber Shim.
  • GREAT FOR BARS AND GAME ROOMS - Perfect for Commerical and Home Use.
  • LONG-LASTING RUBBER - Rubber Lasts Longer than Wood Shims.
Check Stock

12 Pcs Metal Shim Stock 316 Stainless Steel Sheet Shim Flat Sheets of Metal for Kitchen DIY Craft Making Marine Application 0.001 0.0015 0.002 0.003 0.004 0.005 Inch Thick 6 x 12 Inch

  • 316 Stainless Steel: this 316 stainless steel shim stock is made of 316 stainless steel material, which has corrosion resistance, rust resistance, high temperature resistance performance.
  • Wide Applications: this stainless steel sheet shim is bendable that can be machined or cut into various parts, such as metal shims, washers, spacers and more, and you can DIY crafts as well.
  • Proper Sizes: this stainless steel sheet metal is approx. 30.48 x 15.24 cm/ 12 x 6 inches (length and width), with various thickness, including 0.001 inch, 0.0015 inch, 0.002 inch, 0.003 inch, 0.004 inch, 0.005 inch, which can meet your different uses.
  • Sufficient Quantity: please be careful not to cut your fingers and open the package carefully.
  • There are 12 pieces of stainless steel metal sheets in the package, enough for your various uses and replacements, 6 different thicknesses, 2 pieces each.
  • Practical Gifts: you can give this set of sheet of stainless steel to your family, colleagues and friends, and they will be very happy to receive such a practical and useful gift.
Check Stock

EFI Fuel Injected Motorcycle Gas Tank Frisco Mount Shallow Tunnel 2.5 Gal Sportster Bobber Style Harley Davidson Nightster Iron Low Forty Eight SuperLow Chopper Custom XL 883 1200 XL883 XL1200 07-2020

  • Excellent Quality ( Not Made in China ) New Motorcycle Gas Tank Frisco Tunnel EFI Fuel Injected Harley Sportster 2007 to 2020 XL 883 1200 XL883 XL1200.
  • Frisco tunnel Utilizes stock fuel pump and Stock fuel cap, Rear of tank reduced 1” from stock.
  • 2.5 gal capacity / 15" long x 9.25" wide x 7.75" tall low shallow Frisco tunnel.
  • Thanks for Looking at our Quality items, Tanks are pressure tested , Be sure fit of tank, mounting hardware, petcocks and gas caps are true prior to painting No stress is applied to the tabs when bolting them to the frame, this can lead to cracking of welds. If needed, use leather or rubber washes to shim between the tabs and the backbone to ensure an even fit. Do not sand seams or welded edges of gas tanks, if needed use a thin spread of body filler prior to painting.
  • The Frisco style gas tank is a throwback to sixties show bikes. Sportster tank is a direct bolt on for 2007 and up Sportsters which use electronic fuel injection (EFI). The custom tank will use the stock fuel pump and gas cap and is a direct bolt on part. No drilling, welding or fabrication of mounting points is required. The notorious flat spot removed from the top of the tank. This is a Frisco mount tank so it will sit high up on the back.
Check Stock

KELCH 7J200880 Vintage Arctic Cat Quarter Turn Gas Cap With Gauge 5 3/4\ Long

  • Excellent Quality ( Not Made in China ) New Satin Flat Matte Black Locking Key Lock Vented Screw-In Gas Cap Bobber Motorcycle Fuel Tank 1996 to new Sportster Dyna Softail.
  • Locking Key Lock Without Slide Cover Satin Flat Matte Black Harley stock style Screw-In Vented Gas Cap Sportster style gas caps are vented and are Satin Flat Matte Black steel. An inexpensive cap that does the job and works with stock and aftermarket This vented cap will work on single-cap model gas tanks or for the right-side gas cap Replaces Harley-Davidson 2 Keys included.
  • Thanks for Looking at our Quality items Tanks are pressure tested , Be sure fit of tank, mounting hardware, petcocks and gas caps are true prior to painting No stress is applied to the tabs when bolting them to the frame, this can lead to cracking of welds. If needed, use leather or rubber washes to shim between the tabs and the backbone to ensure an even fit. Do not sand seams or welded edges of gas tanks, if needed use a thin spread of body filler prior to painting.
Check Stock

V-Drill Guide Standard Hole Sizes 1/8-1/2 Inches - 2 Pack

  • STD1000DGNP V-DrillGuide (1/8-3/8") has 17 holes 1/64" increments (SAE) drill sizes: 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 23/64, 3/8".
  • STD2000DGNP V-DrillGuide (3/8-½") has 9 holes, in 1/64 increment (SAE) drill sizes: 3/8, 25/64, 13/32, 27/64, 7/16, 29/64, 15/32, 31/64, ½".
  • Portable, pocket-sized * Prevents drill bit wander * Centers the holes on pipes, dowels & outside corners.
  • Round stock hole alignment marks on one side * Special nickel alloyed steel heat-treated for durability.
  • Non-plated material with light oil coating to prevent rust * Non-glare finish with/Easy-to-read markings * American Engineered and Made in the USA.
Check Stock

KS E20 Bicycle Dropper Seatpost - 30.9 425/125mm - C228-125-30.9

  • Material: bicycle Seatpost Shim is made of high quality 6061 aluminum alloy, CNC machining CD texture surface ,anti-rust and durable.
  • Feature:Use this bike post shim, 30.9 ID Seat Post shim can be converted to 31.6 bike seat post, bike seatpost shim can help you change the bicycle....
  • Size: 31.6 to 30.9 seatpost shims. Length: 100mm..
  • Tips: Please check your bike frame seat tube outside diameter. Measure the inside diameter of your old clamp. Or measure the outside diameter of your....
  • Application: Bicycle Seatpost reducer matches well with most bicycles, such as MTB ,BMX ,mountain bike, road bike,and more, you can easily adjust the....
Check Stock