ReviewsSae Socket

OEMTOOLS 22488 6 Pack Set Metric and SAE Magnetic Socket Tray Set, Black and Green Socket Organizers, 1/4, 3/8, 1/2 Inch Drive Socket Organizer Tray Set

  • Spot the Difference: Keep your socket drawer tidy and easy to access.
  • Color coded socket trays make it that easy to tell your metric sockets from your SAE sockets at a glance.
  • Mechanical Magnetism: The base of each socket tray contains a powerful magnet that keeps your tools in place.
  • Carry this mobile socket organizer without worrying about dropping tools.
  • Smooth Operator: Rubberized backing that will not mar or scratch surfaces lines the base of these socket trays.
  • Attach to any ferrous metal surface to organize as you please.
  • From Small to Tall: This set includes trays for SAE and metric sockets in 1/4, 3/8, and 1/2 inch drive sizes.
  • Socket trays are designed to keep deep and shallow sockets together in 2 rows.
  • Keep Things Clear: Each tool box socket organizer has socket sizes clearly printed along the length of the tray for easy viewing and even easier identification of the socket you need.
Check Stock

ABN Black Aluminum SAE Socket Holder Rail 3-Piece Set – 1/4, 3/8, 1/2 Inch Socket Rails and 16 Clips Tool Organizer

  • STAY ORGANIZED: Use the ABN Black Aluminum Socket Rail Tool Socket Organizer Tray SAE 3-Piece Set – 1/4″, 3/8”, 1/2″ Inch Socket Holders Organizers and 16 Socket Clips to better organize your tool parts.
  • This socket set organizer accepts both shallow and deep sockets.
  • USE ANYWHERe: Use the 17-inch x 0.82-inch (43cm x 2cm) rails as socket organizers for toolboxes drawer to organize your toolbox, wall socket organizer as you mount on a wall vertically or horizontally, socket tray as you set it on your workbench, or tool drawer organizer as you store it in a drawer.
  • 1-inch x 0.2-inch (25mm x 5mm) keyhole slots to mount on any surface (hardware not included).
  • SAE standard 1/4-inch, 3/8-inch, 1/2-inch socket drives.
  • BUILT TO LAST: Tool socket holder rail constructed from aluminum with black finish for strength and longevity.
  • Socket clips constructed from heavy-duty plastic.
  • End caps constructed from soft plastic (caps removable).
  • Set holds up to 48 sockets (16 sockets per rail).
  • SECURE YOUR TOOLS: Spring-loaded ball bearings on each clip offer a firm and secure hold.
  • Your sockets attach to plastic clips which are friction fit to the aluminum rail.
  • The clips are held in place by soft plastic end caps that are also friction fit to the rail.
Check Stock

NEIKO 02440A 3/8-Inch-Drive Impact Socket Set SAE Sizes 5/16 to 3/4 and Metric Sizes 8 mm to 19 mm Includes Extension Bars and U-Joint 44 Pieces

  • METRIC & STANDARD SOCKET SET: Our universal socket set includes both metric and standard sizes to fit any and all measurements you encounter on the job! This socket kit will fill all your tool needs..
  • HEAVY-DUTY IMPACT SOCKETS: Each socket in this 44-piece master kit is constructed with high-impact drop-forged premium CrV steel. The sturdy and professional chrome vanadium construction allows you to take on any project, large or small..
  • 6-POINT HEX DESIGN: The 6-point hex socket design prevents round off on fasteners under high torque exertion from high-impact or electric wrench output. The included socket set case holds each socket for easy transport and storage..
  • EASY-READ SOCKET SET: Each socket has a highly visible laser-etched marking on a black phosphate finish for easy identification of the socket measurement. This design allows for fast application, efficiency, and accuracy in any work space..
  • METRIC & STANDARD SOCKET SIZES: This set includes SAE deep sizes from 5/16" to 3/4" and SAE standard sizes from 5/16" to 3/4". It also includes deep metric sizes from 8 mm to 19 mm and standard metric sizes from 8 mm to 19 mm..
Check Stock

Pro-LifT W-9010P 14-Inch Heavy Duty SAE Lug Wrench - 4-Way Cross Wrench

  • Made with heat treated drop-forged steel for increased strength and longevity.
  • Universal 4-Way Cross Lug Wrench with 4 socket heads to fit the most common SAE lug nuts.
  • 14 Inch SAE Body Length for easy Leverage and large size to fit the maximum torque.
  • Rust Resistant with Heavy Gauge Steel and precise welding for stable performance during application.
  • 4 Unique socket sizes: 11/16 inches, 3/4 inches, 13/16 inches, 7/8 inches. With 6 point socket head, it ensures to fit well on hex-shaped lug nuts.
Check Stock

WORKPRO 3/8-inch Magnetic Socket Organizer Set 2-Piece SAE & Metric Socket Holders Holds 52 Standard and Deep Sockets for Tool Box Tool Carts Sockets Not Included

  • Powerful Magnetic to Store Sockets Anywhere: Magnetic socket organizer keeps your sockets neatly stored in drawers or mounted on the side of a tool cart. The sturdy ferrite magnet base has a strong magnetic force to keep your socket in the tray and secure the tray to any ferromagnetic surface..
  • High Capacity & Clear Specifications: The WORKPRO Magnetic Socket Organizers accommodate both SAE and metric sockets, and can store up to 52 metric and SAE sockets (6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"). Bring all the sockets together in one organizer for efficient and orderly work..
  • Scratch-Free Mounting: Choose this magnetic socket organizer to protect other items in your garage or tool room from fraying with the storage sleeve. The material of PP+PVC soft magnet can avoid scratches to the greatest extent, and the magnetic base with rubber at the bottom will not scratch any of your tool surfaces..
  • Fit for Standard & Deep Sockets: Each magnetic socket holder is designed to securely store deep and standard metric&SAE sockets. Multiple size options allow your sockets to take their place and keep your work environment....
Check Stock

NEIKO 02461A 3/4 Inch Drive Impact Socket Set, SAE 1” to 1-1/2”, 8 PC, Deep/Jumbo Sockets, Chrome Vanadium Cr-V

  • HEAVY DUTY BUILD: The construction of each 3/4” socket in this 8 piece set consists of extremely strong Chrome Vanadium (Cr-V) steel that will output greater torque, but also has a corrosion resistant black phosphate finish to give your sets longevity and longer lifespan..
  • LARGE SOCKET: This ¾” impact socket set is designed for use with impact wrenches. A set of 8 high-torque, 6-point SAE sockets with ¾ inch drive, each jumbo socket is used to remove tough nuts and bolts on larger vehicles..
  • SPECIAL DEEP DESIGN: Each socket has a unique design that grips the flat sides of fasteners rather than the corners to prevent stripping and rounding off of bolts. With a high torque impact gun, each standard socket will torque the most stubborn fasteners..
  • HIGH VISIBILITY MARKINGS: The easy-to-see high-contrast laser-etched standard size markings allow easy reading in low light settings and promote efficiency on the job..
  • INCLUDES COMMON SAE SIZES: Includes eight common Standard socket sizes (1, 1-1/16, 1-1/8, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2 inch) with blow-mold storage case included..
Check Stock

SAE to Motorcycle Female Cigarette Lighter Socket - 12V-24V Bike Power Extension Cable 6FT SAE 2 Pin Quick Release Connect Disconnect Plug 16AWG Heavy Duty Extension Cord (1 Pack)

  • Type: Motorcycle SAE to Cigarette Lighter Socket Adapter Cable with SAE jack. Designed for extender your power source..
  • Cigarette Lighter Socket Extension Cord: SPT-2 16AWG/2C.
  • Length: 6ft. about 1.8m, the long cable allows you to meet power anywhere you need it. very handy, thick and heavy duty enough..
  • With Waterproof Cover : It can protect sae quick connectors and 12v cigarette lighter plug from rain and dust, which can stay clean and dry inside when you don't use it..
  • Wide Application: If you have a motorcycle that already has a battery tender, this cigar cable is a great way to get an additional power point. Plug and play. Have a wide range of application in motorcycles, ATVs, snowmobiles, scooter, RV, mower, bike, truck, etc. 12v cigarette lighter adapter helps to keep cell phones, GPS devices, CB radio and other usb devices charged in long ride..
  • [Package]: 1 pcs 12v-24v sae to car cigarette lighter female socket power cable √.
  • 24 hours passionate customer service √.
  • Any question, please feel free to contact us first, we will support you the best customer service..
Check Stock

WORKPRO 1/4-inch Magnetic Socket Organizer Set, 2-Piece SAE & Metric Socket Holders, Holds 52 Standard and Deep Sockets for Tool Box, Tool Carts (Sockets Not Included)

  • Powerful Magnetic to Store Sockets Anywhere: Magnetic socket organizer keeps your sockets neatly stored in drawers or mounted on the side of a tool cart. The sturdy ferrite magnet base has a strong magnetic force to keep your socket in the tray and secure the tray to any ferromagnetic surface..
  • High Capacity & Clear Specifications: The WORKPRO Magnetic Socket Organizers accommodate both SAE and metric sockets, and can store up to 52 metric and SAE sockets (4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8" ). Bring all the sockets together in one organizer for efficient and orderly work..
  • Scratch-Free Mounting: Choose this magnetic socket organizer to protect other items in your garage or tool room from fraying with the storage sleeve. The material of PP+PVC soft magnet can avoid scratches to the greatest extent, and the magnetic base with rubber at the bottom will not scratch any of your tool surfaces..
Check Stock

SATA 212-Piece Ultimate Socket Set 1/4-Inch, 3/8-Inch, 1/2-Inch Drive - ST09511U

  • [VERSATILE SET] 6 Spark Plug Sockets, 23-1/4" Dr. 6PT SAE and Metric Sockets, 19- 1/4" Dr. 6PT SAE and Metric Deep Sockets, 29-3/8" 6PT SAE and Metric Sockets, 24-3/8" Dr. 6PT SAE and Metric Deep Sockets, 39-1/2" Dr. 6PT SAE and Metric Sockets, 29-1/2" 6PT SAE and Metric Deep Sockets, 35-1/2" Dr. 12PT SAE and Metric Sockets, 8-1/2" Dr. 12PT Deep Metric Sockets.
  • [ACCESS] Sockets Feature Off-Corner Loading to Reduce Fastener Rounding.
  • [LONG-LASTING] Full Polish Chrome Finish.
  • Chamfered Opening to Guide Fastener Into Socket.
  • [READABILITY] Large Hard-Stamped Size Identification.
Check Stock

Milwaukee 3/8 in. Drive SAE/Metric Ratchet and Socket Mechanics Tool Set (56-Piece)

  • 【HEAT TREATED CR-V】: KBOISHA industrial grade impact socket set adopt higher quality chrome vanadium steel. After heat treatment and forging, it has high hardness and good toughness. Flexible for impact wrench and other high torque tools..
  • 【6-POINT DESIGN】: Special internal arc angle design of 6-point socket increases the contact area with the fasteners, grasp more firmly. Protect nut from wear and skid..
  • 【HIGH DURABILITY】: The surface is black phosphate finish to prevent the socket from rusting,and corrosion resistant, extend the service life. Can remove fasteners at least ten thousand times..
  • 【DOUBLE SIZE MARK】: The laser mark on the impact socket and the specification mark on the tool box make it easy to quickly identify the socket you need. It is suitable for the installation and repair of automobile, machinery, equipment and other products..
  • 【COMPLETE CONFIGURATION】: With a heavy toolbox, convenient to storage and carry, include: 1/2" drive 15 x metric sockets.
  • 14 x Deep SAE sockets. 3",6",10" drive im....
Check Stock

GEARWRENCH 10 Pc. 1/4\ Drive 12 Pt. Standard Socket Set, SAE - 80307D

  • INCLUDES: 10 Piece 1/4" Drive 12 Point Standard Sockets, SAE.
  • BENEFITS: Chamfered opening quickly guides fasteners into socket.
  • FEATURES: Off-corner loading design reduces fastener rounding.
  • CONVENIENCE: Double line (SAE) and knurled (metric) ring help easily identify standard and metric sockets. Hard stamped size markings..
  • DURABILITY: Bright, full polish chrome finish easily wipes clean and resists corrosion.
  • STORAGE: Includes socket rail for storage and organization.
  • STANDARDS: Meets or exceeds ASME specifications.
Check Stock