ReviewsSafety Battery Holder

Worx 20V GT 3.0 (1) Battery & Charger Included

  • [3-TOOLS-IN-1] Easily transforms from a precision string trimmer, into a powerful in-line wheeled edger, into a nimble mini-mower.
  • [AUTOMATIC FRESH LINE] Proprietary Command Feed tech lets you add more line as needed, just by pushing a button, so you don’t have to stop and can get the job done quicker.
  • [SAME BATTERY, EXPANDABLE POWER] The same battery powers over 75+ 20V, 40V, and 80V lifestyle, garden, and power tools in the Power Share family.
  • [FIND YOUR POSITION] 7 handle adjustments and 6 rotating head settings make this a comfortable and flexible tool you can use all afternoon and in many hard to reach places.
  • [LONGER & STRONGER] An entire foot longer than the last version of the WORX GT, with a motor running at 7600 revolutions/min, so you can find the right length, then power through your chores.
  • [FREE SPOOLS FOR LIFE] That’s right, just pay S&P and we’ll send you a free 6-pack of spools whenever you need them—and the extra spool holder on the shaft means one less trip back to the shed.
  • [INCLUDES] 20V GT Revolution, (2) 20V MaxLithium Battery, (3) Trimmer Spools, 20V Battery Charger, Support Wheels, Safety Guard, Flower Guard, Spool Holder.
Check Stock

Aobao 8pcs Single AA Battery Holder 1 X 1.5V AA Battery Holder Case Box with Leads Wires

  • 【AA Battery Holder Type】1 aa battery holder, 1x 1.5V aa battery holder with leads..
  • 【Package Included】 8pcs single aa battery holder with leads wires(batteries not included). With spring load design, can easily put the battery in it..
  • 【Size of 1 AA Battery Holder】Body size : 5.7 X 1.7 X 1.4 cm/2.24" X 0.66" X 0.55"(L*W*H).
  • 【High-quality material】Maded of high quality material, plastic ABS, Lightweight, exquisite workmanship..
  • 【DIY Supplies】1 X 1.5V single aa battery holder with leads can be connected to multiple battery boxes, and 3V aa battery holder, 4.5V aa battery holder, 6V aa battery holders can be obtained by simple DIY. Perfect to be used as a external power source..
Check Stock

ACEIRMC 10pcs cr2032 Battery Holder Coin Cell Holder CR2032 Battery Holder with Switch 2 x 3V CR2032 Button Coin Cell Battery Holder with Leads On Off Switch

  • Battery Holder Type: cr2032 battery holder, cr2032 battery holder with on off switch.
  • Battery Holder Voltage Output: 6V, 2 x 3V CR2032= 6 Volt battery holder.
  • Coin Cell Battery Holder with Switch Function: ON/OFF switch on battery....
  • Button Coin Cell Battery holder Dimensions: (L*W*H)/2.185" x 0.937" x0.240"/5.55cm x 2.38cm x 0.61cm.
  • Wire Leads: coin cell battery holder with leads, tinned wire end.
  • Cable Diameter(count in the PVC isolation around the....
  • Package Contents: 10 x cr2032 coin cell battery holder.
Check Stock

LAMPVPATH (Pack of 6) A23 Battery Holder, 12V Battery Holder, 23A Battery Holder, 12V Battery Case with Leads Wires

  • Package includes 6pcs 23a battery holder: 12V battery holder, 12V battery case with leads.
  • Voltage Output of One 23a Battery Holder: 12V, 1x 12V 23a battery= 12 volt battery box.
  • Dimensions of a23 battery holder: (L*W*H)/1.370" x 0.516" x 0.484"/3.48cm x 1.31cm x 1.23cm.
  • Weight of "12V 23a battery holder": 0.105oz/3g.
  • 12V Battery Box With Lead wires: all 23a battery case holder with leads, they are tinned wire end.
  • 23a Battery Holder Wire Length: 5.9"/15cm.
  • Cable Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
Check Stock

LAMPVPATH (Pack of 2) 8 AA Battery Holder, Two Layers Battery Case, 12v AA Battery Holder, 8 AA Battery Holder with Leads with (Pack of 2) I Fonts Clip Connector

  • Battery Holder Type: 8 x aa battery holder, 12 volt battery holder.
  • Construction: Two layers,each layer can load 4 AA batteries,totally can load 8 AA batteries.
  • Voltage Output of 8 Cell AA Battery Holder : 12V, 8 x 1.5V aa battery= 12v battery holder.
  • Dimensions of 12v AA Battery Holder(L*W*H): 4.37" x 1.30" x 1.22"/11.1cm x 3.3cm x 3.1cm.
  • With 9V Snap Connector Size: 0.94" x 0.51" x 0.39"/2.4cm x 1.3cm x 1cm with wire length 14.5cm/5.7".
  • Weight: 14g/0.50oz(one 8aa battery holder and one 9V battery connector).
  • Package Content : (2 Pcs) Two Layers 8 AA Battery Holder for 8 AA Batteries with (2 Pcs) 9V I Type Snap Connector.
Check Stock

LAMPVPATH (Pack of 3) 2 AAA Battery Holder with Switch, 2 x 1.5V AAA Battery Holder Case with Wire Leads and ON/Off Switch

  • AAA Battery Type: 2 AAA batteries, 2x 1.5V AAA batteries.
  • Voltage Output of One 2 AAA Battery Holder: 3V, 2x 1.5v aaa battery= 3 volt aaa battery holder.
  • Battery Holder Switch Function: AAA battery holder with ON/OFF switch.
  • Wire Leads: aaa battery holder with wire leads, tinned wire end.
  • Cable Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
  • AAA Battery Case Dimensions: 2.48" x 1.189" x 0.598"/6.3cm x 3.02cm x 1.52m(L*W*H).
  • One Battery Holder with One Screw Weight: 0.458oz/13g.
  • Package Contents: 3Pcs battery holder with 3Pcs screws.
Check Stock

TANGT 2pcs LED Cup Holder Lights,7 Color 4 Light Effects Changing USB Charging Mat Waterproof Cup Pad,LED Car Interior Atmosphere Lamp

  • 【7 Color Modes LED Cup Holder】RGB Car Cup Holder Coasters with 7 Colors（White, Red, Blue, Green, Yellow, Purple, Ice Blue）and 4 Modes( Breath Changes, Gradual Changes, Seven Color, Constant Light).The Led Cup Holder Light has 17 Different Color Lighting Modes by Pressing The Switch..
  • 【Smart Light & Vibration Sensor To Turn ON/OFF】The LED Cup Holder can be turned on or off by pressing the switch on the back and holding it for 3 seconds.This Cup holder will automatically turn on in the dark when it senses vibration,And turns off after about 15 seconds..
  • 【Waterproof & Long time working】Car coaster IP67 waterproof, built-in 220mAh battery, the product is charged by USB cable, charging 2 hours, can work continuously for 15 days.NOTE: For safety air shipping, so we keep the battery volume to 0. If you found not working at the first moment please charge the product..
  • 【Practical and Cool Stuff】The soft light it emits while driving helps you easily pick up your water bottle and things around you without looking. The soft brightness is comfortable and will not affect your driving at all..
  • 【Amazing Gifts】Beautiful water drop pattern design, 7 color lights,This would be amazing gifts for your friends, families and colleagues..
Check Stock

LAMPVPATH (Pack of 3) 2 AAA Battery Holder with Switch, 2 x 1.5V AAA Battery Holder Case with Wire Leads and ON/Off Switch and Cover

  • AAA Battery Type: 2 AAA batteries, 2x 1.5V AAA batteries.
  • Voltage Output of One 2 AAA Battery Holder: 3V, 2x 1.5v aaa battery= 3 volt aaa battery holder.
  • Battery Holder Switch Function: AAA battery holder with ON/OFF switch.
  • Wire Leads: aaa battery holder with wire leads, tinned wire end.
  • Cable Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
  • Battery Case Dimensions: 2.48" x 1.00" x 0.64"/6.3cm x 2.55cm x 1.62m(L*W*H).
  • Package Contents: 3Pcs battery holder with Cover Switch.
Check Stock

Dual Battery Isolator Kit - HORSMILE 12V 140Amp Voltage Sensitive Relay & Wiring Cable Kit, Complete VSR Double Battery Automatic Charger, Fits Trucks, SUV, ATV, ATV, UTV, Boats & More, Upgraded

  • Application: High performance, this car battery holder is designed to fit for Honda Civic/CRX 1988-2000..
  • Professional Craftsmanship: Specifically designed and engineered to keep your battery in its original position in any driving condition. Maintains all the safety design parameters built into the original design battery tie down..
  • High Quality: The Car battery holder is made of superior and quality aluminum alloy material. Anodized using a unique hard anodizing process for a long lasting finish and lifetime durability..
  • Reliable to Use: Manufactured to meet standard specification, strictly follow factory quality control for high reliability..
  • Aramox Customer Service: Premium product quality and 12 months of worry-free warranty. If you have any questions about this product, please feel free to contact us. Aramox will provide you with satisfactory solutions..
Check Stock

18650 Battery Case Holder with Lead Wire Bundle,8 Pcs DIY Battery Storage Boxes 18650 Charging 1 Bay Cell Battery Holder 1 Slots in Parallel Black Plastic Batteries Case with Pin

  • 18650 Battery Holder Wire Leads - All 18650 battery case holder with leads, they are tinned wire end, the black and red two wire design is great for....
  • New generic Plastic Battery Storage Case Box Holder，Battery type: 8 pcs 18650 Case Holder together，With high quality steel spring fit for all kind....
  • Material Great items for keeping your standard or rechargable batteries together and safe.Wire lead battery case holder for 18650 single....
  • Design Metallic spring with pin design for easy install and convenient for electric circuit DIY work.Battery holder is made of ABS plastic with nickel....
  • Multipurpose Battery Case Holder - 18650 battery holder with soldering pins is designed for 3.7V 18650 rechargeable batteries，Case for rechargeable....
Check Stock

LAMPVPATH (Pack of 2) 2 AA Battery Holder with Switch, 2X 1.5V AA Battery Holder Case with Wire Leads and ON/Off Switch

  • Battery Type: 2 AA batteries, 2x 1.5V AA batteries. There are 2 pcs 2aa battery holder in the package..
  • Battery Holder Switch Function: AA battery holder with ON/OFF switch.
  • Wire Leads: 2 aa battery holder with wire leads, tinned wire end.
  • Cable Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
  • AA Battery Case Dimensions: 2.71" x 1.34" x 0.75"/6.88cm x 3.4cm x 1.9cm(L*W*H).
  • One Battery Holder with One Screw Weight: 0.67oz/19g.
  • Package Contents: 2 Pcs battery holder with 2Pcs screws.
Check Stock