ReviewsSafety Lanyard System

Stop Kill Safety Lanyards Floating Safety Switch Lanyards Boat Engine Emergency Stop Tether Cord Universal Safety Boat Motor Lanyards for Floating Safety Accessories (2)

  • What's included: package contains stop kill safety lanyards, enough amount can satisfy your daily usage and replacement needs, and allow you to share with your family members, friends, neighbors and more.
  • Trustworthy material: the floating safety switch lanyards are made of polyurethane, rubber and nylon fiber, wear-resistant and no deformation, high hardness, safe for you to use, durable and sturdy to support a long-term application.
  • Flexible lanyard: each boat engine safety kill stop switch lanyard is extendable and flexible, 12 inches in coiled state and can be stretched to 47 inches or longer.
  • And it is convenient to carry or store, without taking up much space.
  • Considerate design: the floating safety switch key lanyard is safe and comfortable to use, the buckle is covered by rubber protection design, so it will not hurt your when it rebounds.
  • And the lanyard is designed with rubber fabric, which can float on the water if it falls off.
  • Practical function: the floating stop switch rope is practical for you to use, when turning on the motorboat, you can fasten the floating wrist lanyard switch rope, it can change the switch and allow the motorboat to stop, which can help avoid accidents and protect the safety.
Check Stock

Frienda 4 Pieces Universal Outboard Kill Switch Keys with Safety Stop Switch Lanyard Suit for Most Board Engine

  • What you will get: you will get 4 red outboard stop switch lanyards, they can be applied to cut off the power/ignition of the outboard engine.
  • Quality material: the outboard lanyard is made of quality plastic.
  • Very strong but lightweight, durable quality can be applied for a long time.
  • Size: the length of the safety stop lanyard is 59 inch when uncoiled, red coil extendible lanyard with swivel snap hook, which can prevent tangles.
  • How to use: fix the plastic end under the flameout switch, and then tie the other end to your hand.
  • Pull down the safety switch lanyard in an emergency, the engine power on the ship will be disconnected.
  • Fits for most outboard engine: this outboard switch lanyard is very convenient to use and can handle emergency situations.
  • It is a kill switch safety tether, the switch fits for most brand outboard engine.
Check Stock

KwikSafety (Charlotte, NC) RATTLER 4 PACK (Internal Shock Absorber) Single Leg 6ft Safety Lanyard OSHA ANSI Fall Arrest Protection Equipment Snap Hooks Construction Arborist Roofing

  • WHO – “We Don’t Cut Corners on Safety” | The KwikSafety RATTLER is a single leg, heavy duty, high performance safety lanyard that meets and exceeds ANSI Z359.13-2013 standards. Be seen and be safe with the fluorescent yellow polyester webbing. Use with compatible fall protection safety harness, free fall (FF) lanyards, energy absorbers, lifelines, and anchorage lanyards..
  • WHAT – “All the Safety Bells and Whistles” | The self-locking snap hooks meet ANSI Z359.12 standards and have a tensile strength of 5,000lbs and gate strength of 3,600lbs. Both hooks allow for ease of use around construction site scaffolding, I-beams, and concrete structures. Expandable webbing allows for a maximum deployment distance of 48 inches (1.2 meters). User weight capacity ranges from 130-310lbs (includes worker weight, clothing, and tools)..
  • WHEN – “To Make a Long Safety Story Short” | The 6 foot (1.8 meters) RATTLER safety lanyard comes completely equipped with an internal shock absorber that makes it a more lightweight fall protection device. Avoid accidents with the double-locking mechanisms and anti-rollout gates on the RATTLER lanyard. Have peace of mind knowing the RATTLER fall protection safety lanyard restraint was designed with your safety in m....
Check Stock

Vinylcation Purple Awareness Ribbon Lanyard for Supporting Alzheimer’s Fibromyalgia Lupus Epilepsy and Many More Great Causes! Keychain and ID Holder for Keys or Badge | Durable Woven Polyester

  • PURPLE RIBBON LANYARD – Display your support with this versatile awareness lanyard. This lanyard is perfect for fundraisers and charitable events....
  • BREAKAWAY SAFETY-RELEASE – This quality lanyard includes a safety release allowing the lanyard to break apart with a firm tug..
  • MULTIPURPOSE KEY and ID HOLDER – Use this lanyard to hold an ID badge at school, keep your keys close at hand, or for holding a single room key or....
  • WOVEN FABRIC – Each 21” long keychain lanyard is made with a high-quality, stain-resistant woven polyester that’s tough, durable, and offers....
  • 100% RISK-FREE PURCHASE: We make our customers our top priority which is why we only use the highest quality materials along with stylish designs that....
Check Stock

4 Pieces Outboard Lanyard Jet Ski Key Universal Outboard Switch Keys Safety Boat Motor Outboard Engine Kill Switch Key Lanyard with Kill Safety Lanyard Suit for Most Outboard (Red)

  • What you will get: the package includes 4 pieces of outboard lanyard in red, the bright color is noticeable, easy for you to find and operate, the sufficient quantity is enough for you to use and replace.
  • Main function: the universal outboard switch keys can be applied to cut off the power/ ignition of the outboard engine.
  • Lightweight and compact, convenient for you to carry to any place, save your time and energy.
  • Thick enough craftsmanship: the universal safety boat motor outboard engine kill switch key lanyard is made of quality plastic, strong yet elastic, hard to break or fade, can be applied for a long time.
  • Easy to apply: the safety lanyard is convenient to operate, you just need to fix the plastic end under the flameout switch, and then tie the other end to your hand.
  • Pull down the switch lanyard in an emergency, the engine power on the ship will be disconnected.
  • Size information: the kill safety lanyard measures approx. 62.9 inches/ 160 cm when uncoiled, coil extendable lanyard with swivel snap hook, which can prevent tangles.
Check Stock

E-flite Fuselage: Conscendo Evolution, EFL01651

  • Flexible Design --------- The safety stop switch lanyard for marine engines is expandable and flexible. It is flexible and flexible, and has a rotatable hook to prevent tangles. And it is very convenient to carry..
  • Emergency --------- This switch off key rope is used for emergency insurance. In an emergency, pull down the safety switch lanyard, and the ship's engine power supply will be disconnected..
  • Accessories --------- Single ignition cut‑off switch with 2 keys, perfectly fit for the Johnson BRP Evinrude boat motor. With pre‑drilled mounting holes and mounting screws, it is easy to install..
  • Easy To Use --------- The engine stop switch lanyard is easy to install and easy to install on the engine stop switch key. You only need to fix the plastic end under the flameout switch, and then tie the other end to your hand..
  • High Quality --------- The lanyard of the engine safety flameout stop switch is made of high-quality ABS plastic, waterproof and light in weight, which maximizes durability. Manufactured according to strict quality control standards, and improved design to increase durability..
Check Stock

Sellstrom V8252356Peakworks Safety Harness Fall Protection Lanyard Kit – Full Body, Industrial, ANSI Compliant, Adjustable, Hi Vis, 6 FT, 5 Point System - Green, Yellow/Blue, Universal

  • ANSI Z359 CERTIFIED – All Peak works safety harnesses are certified to meet the latest ANSI Z359 Fall Protection Code Standards for fall protection system guidelines..
  • INDUSTRIAL STRENGTH – 6ft rip stitch, shock-absorbing lanyard is made with 1. 75″ polyester webbing for maximum strength. Inner webbing will tear to reduce force the worker feels if a fall occurs..
  • UNIVERSAL FIT – Quick connect, 5 point chest, leg and shoulder buckles are adjustable, providing a comfortable, secure fit for men and women, large and small. Reflective green harness is lightweight at only 2. 25 lbs..
  • SNAP HOOK – Lanyard rope has 2 double lock snap hooks made of zinc plated steel with a minimum breaking load of 5000 lbs. and 100% proof loaded to 3600 lbs..
  • SAFETY APPLICATIONS – Use fall arrest gear kit for many industrial and recreational functions, including construction, roofing, tree work, hunting, climbing, ironworkers, and more..
Check Stock

Leupold GX Quick Draw Golf Rangefinder Tether System

  • 36-Inch Kevlar Cord with Whisper Quiet Retractor Technology.
  • Industrial Strength Velcro Security Strap.
Check Stock

Pokemon Charmander 004 Lanyard with ID Badge Holder & PVC Rubber Charm

  • Gotta catch 'em all. This is a limited edition Pokemon Charmander lanyard by Bioworld...
  • This official Charmander 004 lanyard comes with ID badge holder and Charmander PVC rubber charm..
  • Lanyard features graphics on both sides..
  • Lanyard length is approximately 20" off neck, 40" around neck. Lanyard length is not adjustable. Lanyard features a safety break away clasp. ID Badge holder is detachable..
  • PVC rubber Charmander charm is approximately 1 3/8" W x 1 7/8" H, measuring longest sides..
Check Stock

PETZL Scorpio Vertigo via ferrata Lanyard

  • Lanyard for users weighing 40 to 120 kg: - lanyard conforms to the EN 958 standard: 2017, for a wide range of weights of users - two elasticized arms have long extension capacity to adapt to all shapes.
  • Comfort: - ultra-compact absorption-by-tearing system (Petzl patent) - short connection of lanyard to the harness limits interference when walking - two elasticized arms facilitate manipulations - short arm can be used for resting on a rung - ergonomic VERTIGO WIRE-LOCK carabiners with automatic locking system adapt to all hand sizes.
  • Durable design for intensive use: - zippered protective storage case protects the energy absorber - retractable HDPE (high-density polyethylene) arms and aluminum carabiners are very durable - for intensive use (groups).
  • Length of lanyard (without carabiners): - retracted: 77 cm - extended: 108 cm - short arm: 32 cm.
  • Certification(s): CE EN 958 : 2017, VG11 2013, UIAA Carabiners: CE EN 12275 type K, UIAA.
Check Stock

Pokemon Pikachu Attack Lanyard with ID Badge Holder & PVC Rubber Charm

  • Gotta catch 'em all. This is a limited exclusive Pokemon Pikachu attack lanyard by Bioworld..
  • This officially licensed exclusive Pikachu lanyard comes with ID badge holder and Pikachu PVC rubber charm..
  • Lanyard features graphics on both sides..
  • Lanyard length is approximately 20" off neck, 40" around neck. Lanyard length is not adjustable. Lanyard features a safety break away clasp. ID Badge holder is detachable..
  • PVC rubber Pikachu charm is approximately 1" W x 1 1/4" H, measuring longest sides..
Check Stock